Engineering goods like machined, forged, stamped, casting, aluminum casting, aluminum extrusion, fasteners, springs, washers, gaskets, oil seals, rubber components, etc.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Food and beverage, home decoration, kitchen machines, wood working machines, clothing and fashion, woods, general products, massage and spa oils, silk & thai handicrafts, automotive spare parts genuine, juices and drink, food products, clothing, furniture like hotel furniture, outdoor & garden furniture, home furniture, office furniture, wooden doors, furniture hardware & accessories.Sourcing, general trading, exporters, oem, odm, and packaging
We can supply: PET BOTTLES (aprox. 95% CLEAR - 5% COLORS) BALES. Post consumer from sorting line. Bottles did not contain liquid inside due to the big pressing force of our baler machine. We have one of the strongest baler in Europe. Can load in 1x40HC container aprox. 26 - 28 MT. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials.
Can supply: HDPE GRIND (REGRIND) From Crates Sorted Color And Mix Color In Big Bags. Size 8-10mm. Injection grade. Post industrial and post commercial. Clean. No foreign bodies inside. Can load in 1x40' HC container approx. 24 MT (10%) Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
Can supply: PC BOTTLES (LIGHT BLUE COLOR) BALES. Post industrial and post commercial. Bottles did not contain liquid inside due to the big pressing force of our baler machine. We have one of the strongest baler in Europe. Can load in 1x40HC container approx. 22 MT ( 10%). Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
Industrial washing machine and dryers.
Covid-19 Self Test Kit We are the authorized first vendor of ADTech! KFDA CE approved, FDA Pending Price : Negotiable Pre-Clinical Test Report Accuracy - In total samples 93.3% (14/15) - In positive samples 91.7% (11/12) 1. Pre-Clinical Test summary 1) Pre-clinical test is fulfilled by Domestic large clinical laboratory with ADTech COVID-19 IgM/IgG RAPID KIT 2) Tests are made by total 15 samples with 12 positive and 3 negative samples 3) Clinical Laboratory tested the sample with Immunofluorescence Analysis 2. Pre-clinical test result 1) Samples were tested by ADTech COVID-19 IgM/IgG RAPID KIT 2) Test result by ADTechs RAPID KIT - 4 negatives and 11 positives results in 15 samples 3) Comparison between Immunofluorescence analysis and ADTechs RAPID KIT - 14 test results are same(including negative and positive results) - 1 samples test result are different(Positive Negative by ADTech
This is Ms. Rosa from 99 Gold Data company which is a Vietnamese reliable supplier for variety of fresh and dehydrated Fruits since 2017. Kindly take a look at our key product Dried sort mango slice Specifications: Grade 1 Variety: mango. Color: yellow Origin: Vietnam. Quantity capacity: 50mts/month. MOQ: 1ton. Preserving in common condition, shelf life: 6months. Packing: in 0.5kgs aseptic bag then in 20kgs carton.
Rapid detection kit, ribonucleic acid detection reagent, medical syringes, medical mask, medical ventilator, medical glove, medical isolation gown, surgical gown level 3+4, protective gown (overall ), oximeter, other medical products.