Plaster Mesh
Steel
Steel reinforcement and reinforcing mesh.
Steel bar mesh Steel bar mesh other name reinforced welded mesh, reinforcing mesh panel, building reinforcing mesh, cold rolled ribbed reinforced mesh, reinforcing mesh without rib (Bridge reinforced mesh, coal mine reinforced mesh) Steel bar mesh workshop cover an area of 2000 square meters, article 2 the large steel bar mesh running water production line; Daily production capacity of 56 tons; Products comply with both mechanical properties and process performance; The technical specification for concrete structures of steel bar welded mesh(JGH114-2003), the reinforced concrete welding net(GB/T1499.3-2010)and the cold rolled ribbed bar(GB13788-2088)standard and design requirements. The material of reinforced mesh and welded reinforced mesh:CRB550 HRB400 APB550 The specifications of reinforced mesh and welded reinforced mesh: Wire diameter: 5-18mm Aperture 10mm*10mm---200cm*200cm Mesh size is a square in commonly and also is rectangular mesh(100*150; 100*200) Widest: 3m the longest:17m In order to transportation of convenience suggested width in 2.3m length in 6m. Reinforced mesh widely used in multi-storey and high-rise buildings, airport runway, highway, tunnel, subway, the air raid shelter, concrete piped, bridges, water conservancy am foundation , docks,warehouses, and a sewage treatment pond of reinforced concrete structure.
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Marble & granite,stones & slates,power cord, wires & cables , cable assemblies ,optical fiber cables , coaxial cables, tyre scrap , heat exchangers , steel tire wire scrap, firewoods.
we are able to offer a superior quality range of Reinforcement Mesh. All our products are available in various sizes, designs, and shapes at market leading prices to meet the demands of customers.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Deformed steel bars, reinforcing steel mesh.Exporter, manufacturer
Materials: carbon steel and stainless steel (302,304,304L,316,316L etc). Characteristics:The welded stainless steel water well screen is made up of rods and warp. The rod can be round wire, triangular wire or trapezoid wire. The warp is triangular wire (V-shaped wire). Water well screens have a structure and high open area, as well as accurate slot dimension. At the same time, water well screen have heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability and so on characteristics. It can be used in many kinds of medium filtering. Uses: The strainer is a kind of filtered water tubing with the perforation .it can use with the deep well pump, dive the water pump, also may use in the water-treating equipment, the environmental protection, the sea water transforms into the industrial water and life use water desalination treatment, running water treatment, water softening treatment, the petroleum industry: The petroleum product terminal filters and the chemical acid, the alkali liquid filters, the ethyl alcohol and so on the organic solution recycling filters. Continuous slots significantly increase discharge area,thus providing greater access to water-bearing zone . We can produce this pipe with diameter 80mm-550mm ,slot size 0.1mm-10mm,length 50mm-5850mm .
Concrete reinforcement mesh is classified ribbed concrete reinforcement mesh and plain steel wire concrete reinforcement mesh. The wire of ribbed concrete reinforcement mesh is 3 faces indentation.Please see figuer Concrete reinforcement mesh is always used on residential slabs and footing-construction and BCA complying with AS 2870,which is always paced in all reinforced conrete members to stop the concrete cracking. And F62/F72/F82/F92/F1018 concrete reinforcement mesh is old specification,was replaced by SL62/SL72/SL82/SL92/RL1018.For example:previously called F62(now SL62) is wire diameter 6mm bars welded together in a 200mm square grid.the panel size is 2.4m X6m. The Tensile strength is 300Mpa. The concrete reinforcement mesh specification as below: Reinforcing Mesh Code wire diameter aperture edge open width length weight per sheet(kgs) F62 5mm 200*200mm 200mm 2.4m 6m 20.92 F72 6mm 200*200mm 200mm 2.4m 6m 30.12 F82 7mm 200*200mm 200mm 2.4m 6m 41 F92 8mm 200*200mm 200mm 2.4m 6m 53.55
Concrete Reinforcing Mesh Panel also called: Steel Bar Welded Wire Mesh /reinforcing welded mesh panel,cold ribbed steel bar mesh,welded wire mesh. Material: steel bar Weaving: the wires that run parallel to the width of the roll are placed on top of the wires running parallel to the length. Then, the wires are welded where they intersect. Wire diameter: welded steel bar panels ranges from 5mm to 16mm. Applications: Welded steel bar panels are widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body. Features: Solid construction, Easy handling Packing: PVC Shrink, Moister-proof paper, Carton, pallet, Wooden Box , Special packing can be arranged upon request
Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories.Transportation agent,customs clearance service,
Reinforced Mesh Sheets Reinforcing mesh sheets, also known as reinforcing mesh or welded wire mesh, is a precast panel made of steel wires arranged in a grid pattern. It acts as an internal skeleton for concrete, designed to increase its strength and prevent cracking. Reinforcing mesh sheets help distribute stresses evenly throughout the concrete, reducing the risk of cracking, deformation and structural damage. It also helps to control shrinkage and cracking during the curing process, improving the overall quality and service life of the concrete structure. Reinforcing mesh sheets are mainly used in the construction industry to reinforce concrete structures and improve their durability, stability and load-bearing capacity. Reinforcing bars are embedded in concrete elements such as slabs, walls, columns and foundations to provide additional support and resistance to tensile forces such as bending, shear and temperature changes. Main features of steel wire mesh Strength Enhancement - The primary use of steel wire mesh is to reinforce concrete structures, increasing their tensile strength and preventing cracking and structural damage. By distributing the load more evenly throughout the concrete, steel mesh enhances the overall strength and durability of the structure. Versatile - can be used in construction, industrial, commercial and even residential applications. Crack Control: reinforcing mesh helps control concrete cracking by providing support and reinforcement in areas susceptible to pressure and tension. This helps maintain structural integrity over time and reduces the need for costly repairs. Structural Stability: By reinforcing concrete slabs, walls and foundations, wire mesh improves the structural stability of buildings and infrastructure. It helps prevent sagging, sinking and shifting, ensuring that structures remain stable and safe. Flexibility: Reinforcing wire mesh is available in a wide range of sizes, shapes and configurations to meet different construction requirements. Cost-effective: Although the initial cost of reinforcing mesh is high, long-term cost savings can be realized by reducing maintenance and repair needs.
Welded mesh, hexagonal mesh, chain link mesh, stainless steel mesh, steel reinforcing mesh, galvanized wire and nails.
Reinforcing mesh was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm. the steel bar after drawing shape as below figure: 1. The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45. The angle scope is greater than 45 and is less than 70, the rib height is from 0.025d to 0.10d. 2. The reinforcing mesh panel includes transverse and longitudinal bar, pitch and overhang. The Australian and new zealand's market, the normal panel size is 2.4m*6m.Because of containers size, we always advise our cutomer to make the panel size to be 2.2m*5.8m. It can be easy to be load and save more USD1000 per container for packing and loading cost. Steel pallet for reinforcing mesh size 2.4m *6m Loading container for reinforcing mesh sheet: 2.4m *6m 3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars, twin bars or combination of single bars and twin bars. 4.The technical data of reinforcing mesh panle is contained composition and characteristic mechanical porperties of reinforcing steels. Notes: 1. Grade 250N is supplied as plain round reinforcing steel complying with AS 3679. 1, exceptthe tolerance of the diameter and roundness dosen't apply it. 2. For 500L steel bars, only requriement for wire diameter is less than 5.0mm is RekL 500 Material certificate of reinforcing mesh as below: Common size of Squre reinforcing mesh panel for Austialian Market Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6 x2.4 m sheets Cross-sectional area/m width No. x dia., mm Pitch@mm No. x dia., mm Pitch@mm Unit area kg/sqm Sheet, kg Long'l bars sqmm/m Cross bars sqmm/m Squre, with edge side-lapping bars SL102 10 x 9.5 + 4 x 6.75 200100 30 x 9.5 200 5.6 80 354 354 SL92 10 X 8.6 + 4 X 6.0 200100 30 x 8.6 200 4.6 66 290 290 SL82 10 x 7.6 + 4 x 6.0 200100 30 x 7.6 200 3.6 52 227 227 SL72 10 x 6.75 + 4 x 5.0 200100 30 x 6.75 200 2.8 41 179 179 SL62 10 x 6.0 + 4 x 5.0 200100 30 x 6.0 200 2.2 33 141 141 Squre, without edge side - lapping bars SL81 25 X 7.6 100 60 x 7.6 100 7.1 105 454 454 How can we conctrol our products quality for exporting Autralia? Firstly, we purchase the material from Steel Factory and inspect chemical composition and mechanical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3. Secondly, the panel size tolerances measure way as: a. Panel Size dimensions 6m in length, there is 40mm tolerances. b. Panel size dimensions 6m in length, the tolerance is �±0.7% c. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract. d. Weigh the each bundle weight to calculate each panel weight.
Indian Granite Steel Grey: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.
