Specifications Engine Type 16-Valve DOHC Direct-Action In-line 4 Displacement 2670 cc Bore x Stroke 94x6.2 mm Recommended Max RPM 5000-6000 Lubrication System Wet Sump Fuel Management EFI Ignition TCI Starter System Electric Alternator Output 12V - 37A with Rectifier Regulator Operation Method Remote Control Trim & Tilt Method Power Trim & Tilt Digital Network Gauges with Fuel Management Standard Gear Ratio 2.00:1 OEDA Emission Rating ???? Scavenging Double Overhead Camshaft Fuel Management EFI Oil Pan Capacity (litres) 5.8 Spark Plug LFR5A-11 Gear Shift F-N-R Exhaust system Through Propeller Hub (Jet) Prop. Engagement Spline
Specifications Engine Type 16-Valve DOHC Direct-Action In-line 4 Displacement 2670 cc Bore x Stroke 94x6.2 mm Recommended Max RPM 5000-6000 Lubrication System Wet Sump Fuel Management EFI Ignition TCI Starter System Electric Alternator Output 12V - 37A with Rectifier Regulator Operation Method Remote Control Trim & Tilt Method Power Trim & Tilt Digital Network Gauges with Fuel Management Standard Gear Ratio 2.00:1 OEDA Emission Rating ???? Scavenging Double Overhead Camshaft Fuel Management EFI Oil Pan Capacity (litres) 5.8 Spark Plug LFR5A-11 Gear Shift F-N-R Exhaust system Through Propeller Hub (Jet) Prop. Engagement Spline
Material Composition: 100% natural coconut husk fibers, free from chemical treatments. Fiber Length: Typically ranges from 10 cm to 30 cm, with a mix of shorter and longer fibers. Moisture Content: Generally around 10-15%, with good water retention capabilities. Color: Natural brown to light brown, depending on the degree of processing. Packaging: Compressed into bales or blocks, typically weighing between 5 kg to 30 kg per unit. Applications: Used in gardening, soil conditioning, erosion control, and as a raw material for products like mats and ropes.
Features may include: Powering Your Boat from 115 H.O. to 300 HP E-TEC G2 Best In Class fuel economy E-TEC Direct Injection Fuel Technology V6 from 150 H.O. to 300 HP Power Steering Available in white or gray, plus color panels Engine Engine Type V6 66 E-TEC G2 D.I. Bore 3.39 in (86 mm) Stroke 3.10 in (78.7 mm) Displacement 167 Cu in (2.7 cc) Throttle 5000-6000 RPM Gear Ratio (Primary) 2.17:1 Steering Tie Bar/Remote Electric Starter Electric Alternator 133 Amps Total / 50 net Dedicated / 14 amps @ idle Fuel System Fuel System E-TEC Direct Injection with stratified low RPM combustion mode Dimensions Length Shaft: 25 in (635 mm) Weights Weight 512 lbs (233 kg) Features Features Controls: Slate Gray
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
Experts in domains pertaining to Fertilizers (Ammonia & Urea), Petrochemicals, Refinery Process Units, Oil Terminals, Gantries, Oil Jetties, Power Plant, Onshore Plant and Pipelines, Offshore, Chemicals Plants, Water Treatment Plants etc; and in handling the E&I for projects from Pre-Feed, Feed, to Detailed Engineering, revamping, Procurement, Pre-commissioning and Commissioning. In Electrical and Instrumentation our experts manage client needs of Automation, Electrical and Communication from Planning to Execution Stage for Brownfield as well as Green Field Projects. For both plants designs -Wired Systems or Wireless (Profibus or Foundation Fieldbus) Competent in Telecom and HSE in projects Fire alarm Systems etc. and provide assistance in obtaining Dubai Civil Defense approvals through our associates Team experts provide Electrical and Instrumentation, Pre-Commissioning & commissioning, Field Engineering support for heavy rotating equipments. Our team has GE certified, Bentley Nevada System specialists. They can also manage of your Control system Support needs. We are also a solution provider for Industrial Internet of Things (IIoT), having a very strong domain knowledge and experienced in the field of Sensors, Automation, Communication, Networking and Machine Data Analysis which are main the support pillars of IoT Solution Provider.
"At Glacier Enterprises, we are proud to offer premium quality Cotton Bales sourced from our own state-of-the-art manufacturing unit. With meticulous attention to detail and advanced technology, we produce Cotton Bales of exceptional quality that meet and exceed industry standards. Our manufacturing process ensures that each bale is carefully packed and graded, guaranteeing uniformity and consistency in every shipment. As a leading player in the textile industry, we understand the importance of providing reliable and high-quality raw materials to our clients. With our own manufacturing unit, we have full control over the production process, allowing us to deliver Cotton Bales that meet the exact specifications and requirements of our customers. Trust Glacier Enterprises for superior quality Cotton Bales that are the cornerstone of your textile manufacturing operations."
IFT Machine Digital Pre-programmed Description Digital I.F.T unit is an advanced electro therapy requirement unit micro-controller circuit. Its digital display system indicates output current intensity and treatment time. Technical Specification Base 0-150 Hz Sweep 0-100 Hz Carrier Frequency 4, 2 Hz Therapy modes 4 Pole, 4 Pole vector, 2 Pole Output Current 0-100 mA Timer 0-99 minutes
Ultrasound therapy unit Description Ultrasound therapy 1 and 3 Mhz clinical use Digital with LCD Deluxe Model Metallic Body Manarti 1 and 3mhz frequency Pulsed and continuous therapy operation 10%, 20%, 50% and 100%veriable duty cycle output of 16hz, 48hz, or 100hz. Clinical protocols, the most appropriate application and parameter set for the patientâ??s condition. light weight designs for clinic, hospital and home visits. auto detection of ultrasound applicator. micro controller-based design for optimum accuracy. Soft touch buttons. timer 0-30 minute put power is up to 2. 5 watts / cm2, which is controlled digitally back light LCD display
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator Support parallel operation up to 3 units (available for 3KW-5KW 48V) This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Electric golf vehicles are venue vehicles, developed specifically for golf courses. The vehicle has low chassis, convenient up and down, small turning radius, flexible operation, vacuum wide tire, composite front suspension system, excellent shock absorption performance, smooth driving, comfortable ride; rear suspension adopts leaf spring shock absorption, high rebound, high bearing plate spring design, superior load performance, smooth turbulence and comfortable ride. The vehicle design adopts three-dimensional simulation, according to the ergonomic design, driving, ride comfortable and not fatigue. The control system adopts the main control system imported from the United States, underpressure protection and protection. Golf carts can also be used in resorts, villas, garden hotels, tourist attractions and other places. With the development of China's economy and society, golf has been accepted by more people, and the golf cart has also ushered in a broader market space.
Electric golf vehicles are venue vehicles, developed specifically for golf courses. The vehicle has low chassis, convenient up and down, small turning radius, flexible operation, vacuum wide tire, composite front suspension system, excellent shock absorption performance, smooth driving, comfortable ride; rear suspension adopts leaf spring shock absorption, high rebound, high bearing plate spring design, superior load performance, smooth turbulence and comfortable ride. The vehicle design adopts three-dimensional simulation, according to the ergonomic design, driving, ride comfortable and not fatigue. The control system adopts the main control system imported from the United States, underpressure protection and protection. Golf carts can also be used in resorts, villas, garden hotels, tourist attractions and other places. With the development of China's economy and society, golf has been accepted by more people, and the golf cart has also ushered in a broader market space.
ICUMSA 45 sugar is a highly refined, pure white sugar known for its consistent quality and high purity level. It is produced in Brazil, one of the world's leading sugar exporters, and is often used in food and beverage industries worldwide due to its purity and uniformity. Key Features: Purity: ICUMSA 45 sugar has a very low ICUMSA rating (45 units), indicating its high degree of whiteness and purity. Refinement: It is free from any chemical additives, making it ideal for consumption and industrial use. Applications: Commonly used in confectionery, soft drinks, and various processed foods. Packaging: Typically available in 50 kg bags, suitable for bulk export. This sugar is produced under stringent quality controls, ensuring it meets international standards. As a product from Brazil, it is widely recognized for its quality and reliability in global markets. CIF Pricing: 12,500 tons: 435 USD 25,000 tons: 415 USD 50,000 tons: 406 USD 100,000 tons: 395 USD 150,000 tons: 390 USD 200,000 tons: 385 USD 300,000 tons: 389 USD 500,000 tons: 375 USD
ICUMSA 45 sugar is a highly refined, pure white sugar known for its consistent quality and high purity level. It is produced in Brazil, one of the world's leading sugar exporters, and is often used in food and beverage industries worldwide due to its purity and uniformity. Key Features: Purity: ICUMSA 45 sugar has a very low ICUMSA rating (45 units), indicating its high degree of whiteness and purity. Refinement: It is free from any chemical additives, making it ideal for consumption and industrial use. Applications: Commonly used in confectionery, soft drinks, and various processed foods. Packaging: Typically available in 50 kg bags, suitable for bulk export. This sugar is produced under stringent quality controls, ensuring it meets international standards. As a product from Brazil, it is widely recognized for its quality and reliability in global markets. CIF Pricing: 12,500 tons: 435 USD 25,000 tons: 415 USD 50,000 tons: 406 USD 100,000 tons: 395 USD 150,000 tons: 390 USD 200,000 tons: 385 USD 300,000 tons: 389 USD 500,000 tons: 375 USD
Introducing Grade A-Electrolytic COPPER CATHODES (Cu29) Our premium copper cathodes, with a purity level of 99.98% - 99.99%, guarantee exceptional quality for your industrial needs. Sourced responsibly, our products adhere to the highest standards, ensuring reliability and sustainability. Experience the excellence of Congolese copper with us today! Product: Grade A-Electrolytic COPPER CATHODES (Cu29) law 99.98% - 99,99% Packaging: Palletized Sealed By Aluminium Bands. Price Conditions: CIF, in the Port of Destination. Currency/ Money: AMERICAN DOLLAR OF UNITED STATES Country of Origin: Kazakhstan. Contract duration: annual contract, renewable in the same term Total Quantity / Contract: Initial delivery of 5,000 and from the second month 10,000 metric tons per month. We have Reserves, COPPER CATHODES and Exploitation Permits in Kazakhstan., sufficient to supply the amount of Mineral needed, meet delivery targets and dispatch according to monthly schedules. Inspection: Fresh SGS / port access during Laycan SGS assignment every 5,000 mt for quality control. SGS/Alex Stewart Insurance: TBD 100% Payment Condition: FOB, at the port of shipment or departure. Method of payment: SBLC, DLC, LC. The payment instrument must be from a TOP 25 Bank, preferably an American or European Delivery documents: All shipping documents, product certificates, batch numbers, Fresh SGS, delivery schedule will be provided to the buyer at the port of departure.
Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
On grid / Grid-tied Rated power: 5000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 21kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.