PRODUCT OD (MM) DIMENSION THICKNESS (MM) LENGTH(METERS) S.S.SEMALESS / WELDED TUBES 6.00 MM - 101.60 MM 0.60 MM -3.50 MM 25 METERS S.S.SEMALESS / WELDED PIPES 10.30 MM - 273.05 MM 1.20 MM -12.70 MM 12 METERS S.S.SEMALESS / WELDED U-TUBES 12.70 MM-50.80 MM 0.90 MM-3.50 MM REDIUS 1.5 D TO 1500 MM
Duplex s32205, s31803 is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 serious stainless steel. "duplex" describes a family of stainless steel that are neither fully austenitic, like 304 stainless, nor purely ferritic phase. In the annealing condition, 2205 contains approximately 40-50% ferrite. Often referred to as the work horse grade, 2205 is the most widely used grade in the duplex stainless tube. As required
ARK STEEL TUBE owns three mills mainly produce seamless carbon steel tubes, alloy seamless steel tubes, seamless&welded stainless steel tubes, as well as nickel alloy tubes. Product Standard Material Seamless Nickel&Nickel Alloy Tube ASTM B163, B407, B444, B622, B677, etc. UNS N02200, N02201, N04400, N06600, N06601, N06690, N06025, N06603, N06686, N08120, N08800, N08810, N08811, N08801, N08825. Seamless&Welded Stainless Steel Tube ASTM A213, A249, A268, A269, A312, A789, etc. 304/L, 316/L, 314, 321, 347H, 316Ti, 316LMod, 317L/N, 310S, 253MA, 330, 904L, S31803, S32205, S32750, S31254, XM-19, TP410, TP405, TP420, TP430, TP430Ti, TP403, TP409, TP444,TP439, TP446, etc. Seamless Carbon&Alloy Steel Tube ASTM A179, A192, A210, A213, DIN17175, EN10216-2, etc. Gr.A1, GR.C, T2, T5, T9, T11, T12, T17, T21, T22, T23, T24, T36, T122, 15Mo3, 16Mo3, P235GH, P265GH, 13CrMo44, etc. Available grades for tube and pipe is as below. Ferrite/Martensite: TP410, TP405, TP420, TP430, TP430Ti, TP403, TP409, TP444, TP439, TP446, etc. Alloy Steel Grade: T1, T1a, T2, T5, T9, T11, T12, T17, T21, T22, T23, T24, T36, T122, P12, P5, P91, 15Mo3, 12CrMo, 15CrMoG, 1Cr5Mo, 27SiMn, 09Cr2AlMoRe, 09CrMoAl, 13CrMo44, 10CrMo9-10, 09CrCuSb, 09MnNiD, 09MnD, 09CuPCrNi, 07Cr2AlMo, etc. Austenitic/Super Austenitic Steel Grade: 304/304L, 316/316L, 314, 321, 347H, 316Ti, 316LMod, 317L/N, 310S, 253MA, 330, 904L, S31254, XM-19, etc. Nickel Alloy Grade: N02200/2201, N04400, N06600, N06601, N06625, N06852, N06219, N06690, N08800/8810/8811, N08825, N08028, N08535, N08904, N08925, N08926, N010276, N06022, etc. Duplex/Super Duplex Stainless Steel: S31803, S32304, S31500, S32550, S32750, S32760, etc. Carbon steel tube:A179,A192,A210,DIN17175,etc. Size range: OD: 3-813mm WT: 0.05-120mm Our product enjoys a good reputation in the market of the USA, Canada, Brazil, Mexico, Germany, Italy, Netherland, Britain, Australia, Russia, South Korea, Thailand, Philippines, Malaysia, Iran, South Africa, Ghana and etc. If you have any demands or inquiries, please feel free to send it to us.
Product:Pipes Brand:Renaissance Pipe Fitting Inc. Sizes:Refer the specification Condition:New Rating:4.5, based on 177 reviews price:Start from 20 USD ASTM Pipes, UNS NO S 31803 , S 32205 , S 32750, S 32760 , ASTM B861, ASTM B862, ASTM B338 High Nickel Alloy Pipes, supplier. RFP India is India's well-known manufacturer, supplier and exporter of Pipes, which is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members. We offer different forms of pipes such as Round, Square, Rectangular, Hydraulic and so on, along with having in different length such as Single Random, Bevelled End, Treaded and more. Pipe is made in many. Materials including ceramic, fiberglass, many metals, concrete and plastic, and their sizes can be confusing because the terminology may relate to historical dimensions.
Factory Direct Sell 201 304 316 6 inch welded stainless steel pipe Stainless steel welded pipes/tubes AISI 430 409L 441 436 444 different kinds of stainless steel welded pipes/tubes construction manufacturer welded stainless steel exhaust pipe 409 441 439 Supply ASTM 304 410 430 440 441 Seamless Stainless Steel tube pipe With Low Price 446 410 420 409L 441 436L stainless steel welded pipe for exhaust Good Prices SS Tube 420 431 439 441 443 Stainless Steel pipe 1.4307 Top sell high quality 441 stainless steel welded pipe per meter price 1 buyer Supply China ASTM 441 Seamless Stainless Steel tube/pipe With Low Price 304 316 321 Supply ASTM 441 Seamless Stainless Steel Tube/Pipe With Low Price
Stainless steel pipe Specifications: O.D.: 6 - 630mm W.T.: 1.5 - 30mm Length: 4 - 16m Application: General Hydraulic system, Constructural Decorative/ornamental Standards: gb, iso, astm / asme, din, jis Material: stainless steel (316, 316l, 321, 304(18-8), 304l, 2520(s31803)... .. Method: cold drawn /oem Stainless steel welded pipe & tube Specifications: O.D.: 6 - 680mm W.T.: 1.5 - 45mm Length: 4 - 16m Application: General Hydraulic system, Constructural Decorative/ornamental Standards: gb, iso, astm / asme, din, jis Material: stainless steel (316, 316l, 321, 304(18-8), 304l, 2520(s31803)... ... Method: cold drawn /oem 25kg/box
Stainless Steel Seamless Pipe offered comes in superior seamless construction finish and can be made available in different finish choices as demanded by the customers. Further, these are developed using cold drawn/cold rolling options as per industry standards like ASTM, JIS, DIN and others. We offer these pipes in different outer diameters like 1/8 to 32 as well as in wall thickness options of SCH10S, SCH40S, SCH80S and others. Some of its features include: â?¢ Available in different material grade options Choice of different finish lengths of 1 to 12m or per customer demands Option of different surface treatments like polishing, annealing, bright annealing and others
Cp01 Commodity: austenitic stainless steel seamless pipe 01) process method: cold drawn/cold pilgered 02) surface finish: annealed & pickled /manual polished/mechanical polished 03) ends: plain ends/ bevelled ends acc. To ansi b.16.25 04) material: tp304, tp304l, tp310/s, tp316, tp316l, tp316/316l dual grade, tp317l, tp321, tp347/h 05) standards: astm (asme) sa/a312/m 06) size: A) nps: 1/8" to 10" B) schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s, 120/120s, 160/160s, acc. To ansi b36.19/36.10 C) o.D.: 0.405" to 10" (10.27mm-273.5mm) D) w.T.: 0.049" to 1.125"(1.24mm-28.58mm) 07) length: max.11 meters 08) delivery conditions: annealed & pickled 09) applications: for fluid and gas transport; structure and machining A) general service (petroleum, food, chemical, paper, fertilizer, fabric, aviation and nuclear) B) fluid, gas and oil transport C) pressure and heat transmission D) construction and ornament 10) packing: plastic bag for each piece then packed in seaworthy wooden cases 11) min order quantity: 5 metric tons or upon negotiation 12) delivery date: min. 45 days Plastic bag for each piece then packed in seaworthy wooden cases
Alloy 304 (uns s30400) stainless steel pipe is a variation of the 18% chromium ¿c 8% nickel austenitic alloy, the most familiar and most frequently used alloy in the stainless steel family. This alloy may be considered for a wide variety of applications and exhibits good corrosion resistance, ease of fabrication, excellent formability, and high strength with low weight. Grade 304l, the low carbon version of 304, does not require post-weld annealing and so is extensively used in heavy gauge components (over about 6mm). Grade 304h with its higher carbon content finds application at elevated temperatures. Alloy 304h is a modification of alloy 304 in which the carbon content is controlled to a range of 0.04-0.10 to provide improved high temperature strength to parts exposed to temperatures above 800íp.The austenitic structure also gives these grades excellent toughness, even down to cryogenic All small tubes are packed in plastic bags to avoid scratches in transporting; then in wooden cases
Alloys 316 (uns s31600) and 316l (uns s31603) are molybdenum-bearing austenitic stainless steels, which are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as alloy 304. These alloys also offer higher creep, stress-to-rupture, and tensile strength at elevated temperatures. In addition to excellent corrosion resistance and strength properties, the alloys 316 and 316l cr-ni-mo alloys also provide excellent fabricability and formability which are typical of the austenitic stainless steels. Grade 316l, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). Grade 316h, with its higher carbon content has application at elevated temperatures, as does stabilised grade 316ti. All small tubes are packed in plastic bags.To avoid scratches in transporting; then in wooden cases
Polished 304 Stainless Pipe is a standard stainless pipe that has been polished to a 180 Grit Brushed Finish on its exterior for cosmetic and ornamental applications. Unlike the dull mill finish of standard stainless pipe, this polished stainless steel pipe allows your projects to have a more finished look with excellent corrosion resistance making it ideal for handrails, architectural design, restaurant and store fixtures, trade show displays, marine components and more. Just like standard stainless pipe it has an interior weld seam. SPECIFICATIONS: Type 304/304L Welded, ASTM A312 FINISH: 180 Grit Polish, Brushed Finish CHARACTERISTICS: Welding = Excellent Machining / Grinding = Fair Bending / Forming = Good Wear Resistance = Excellent Corrosion Resistance = Excellent MECHANICAL PROPERTIES: Tensile Strength = 85,800 psi Yield Point = 34,000 psi Elongation = 60% in 2" ; Elasticity = 29,000 ksi Shearing Strength = 11,500 psi Brinell Hardness = 170; Density = .289 lb/in AVAILABLE LENGTHS: 4ft. 6ft, 8ft, 10ft, 20ft, or Cut to Size
Stainless Steel Seamless And Welded Pipes/tubes : Specification astm a312 astm a358 Standard - seamless erw efw Grades - 304, 304l, 316 , 316l, duplex grades Diameter: 1/8nb 24 nb Thickness: sch 5s sch xxs Length: single (5-7 meters), double (11-13 meters), random Price of product ( usd price or fob price):to be discussed Product origin :jindal and import from various mills all over the world Specifications : Our own selection can be substantially utilized in numerous industrial applications which have been the following: Chemical treatment equipment Chemicals tanks Architectural Kitchen equipment Exterior automotive molding and trims Micrometer parts, caps and vaporizer in petroleum fractionating towers Lining for reaction chambers Decorative applications Aircraft exhaust manifolds Metal fixtures for construction purposes Roof drainage products Expansion joints Furnace parts Heating element tubing Storm door frames Tableware Heat exchangers Household appliances Metal molding Air heaters Boiler baffle plates Carbonizing boxes Chemical processing equipment Dryers Exhaust manifolds Metal trim Cabinet hardware Hinges Furnace parts Gas turbine parts Jet engine parts Oils burner parts Oven equipment Petroleum refining equipment Minimum order size and packaging details :minimum order 1mt
Features: 1. Commodity: stainless steel pipe astm a213 tp304/tp304l 2. Process method: cold drawn/cold rolled 3. Surface finish: anneal/pickling/manual polish/ mechanical polish 4. Material: tp304/tp304l 5. Standards: astm a213, asme sa213 6. Size: A) nps: 1/8" to 8" B) schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s, 120/120s, 160/160s, acc. To ansi b36.19 C) o. D.: 6 mm to 219 mm D) w. T.: 0.5 mm to 25 mm E) length: max. 20 meters 7. Delivery conditions: annealled, picklinged and polished 8. Packing: seaworthy wooden cases/steel framed plywood cases/simple packaging 9. Certificate: iso 9001:2000, ped by english lloyd's register, tuv Packing: seaworthy wooden cases/steel framed plywood cases/simple packaging
Features: 1) commodity: seamless austenitic stainless steel pipe/tube 2) process method: cold drawn/cold rolled 3) surface finish: anneal/pickling/manual polished/ mechanical polished 4) material: tp304, tp304h, tp304ln, tp304l, tp310/s, tp316l, tp316h, tp316, tp317l, tp321/321h, tp347/347h, tp316ti, tp904l / uns n08904, saf2205 (s31803 / s32205), saf2507 / s32750 and so on. 5) standards: astm a312/213/269/789/790, din17456 / 17458, en10216-5, jis3463, jis3459, gost, bs and so on 6) size: A) nps: 1/8" to 24" B) schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s, 120/120s, 160/160s, acc. To ansi b36.19/36.10 C) o. D.: 6mm to 630mm D) w. T.: 0.5mm to 30mm 7) length: max. 20 meters 8) delivery conditions: annealed, pickling and polished 9) applications: for fluid and gas transport, structure and machining 10) packing: seaworthy wooden cases/steel framed cases/ simple packaging Packing: seaworthy wooden cases/steel framed cases/ simple packaging
High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder
Features: 1) Commodity: seamless austenitic stainless steel pipe/tube 2) Process method: cold drawn/cold rolled 3) Surface finish: anneal/pickling/manual polished/ mechanical polished 4) Material: 904l / uns n08904 5) Standards: astm B677, din17456 / 17458, en10216-5, jis3463, jis3459, gost, bs and so on 6) Size: A) nps: 1/8" to 24" B) schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s, 120/120s, 160/160s, Acc. To ansi b36.19/36.10 C) o. D.: 6mm to 630mm D) w. T.: 0.5mm to 30mm 7) Length: max. 20 meters 8) Delivery conditions: annealed, pickling and polished 9) Applications: for fluid and gas transport, structure and machining Packing: seaworthy wooden cases/steel framed cases/ simple packaging
Product Name Precision Steel Pipe Standard DIN2391 EN10305-1 ASTMA179 ASTM A192 ASTM A519 Material SAE1010,SAE1020,#10,#20,#45,304,316 Outer diameter 8MM-50MM Wall thickness 0.5-50.0MM Length fixed(3-12m) or customized Technology High precision Cold drawn/ Cold rolled Heat treatment BK/BKS/NBK Advantages Short delivery time Quality assurance Competitive price
Product Name Precision Steel Pipe Standard DIN2391 EN10305-1 ASTMA179 ASTM A192 ASTM A519 Material SAE1010,SAE1020,#10,#20,#45,304,316 Outer diameter 8MM-50MM Wall thickness 0.5-50.0MM Length fixed(3-12m) or customized Technology High precision Cold drawn/ Cold rolled Heat treatment BK/BKS/NBK Advantages Short delivery time Quality assurance Competitive price
High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder
High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder