Find Verified Spring Steel Wires Suppliers, Manufacturers and Wholesalers

Alston is the purchaser of a British hydraulic valve company. He has been purchasing hydraulic valves in Ningbo for 3 years and has been very smooth. Last month, he purchased a batch of hydraulic pressure valves. During the sample approval process, the automatic pressure regulation of the hydraulic pressure valves was not very stable. The hydraulic valve manufacturer checked again and again, but still could not find the reason. Alston had a headache.

Alston realized that he has to look for a new hydraulic valve manufacturer to try, otherwise the order would go away. When he sent the detected data and parameter requirements to the hydraulic valve manufacturers he had previously contacted, only one manufacturer told him that it was the problem with the pressure spring material or the processing process, but because of power limitation, he has no time to produce this hydraulic pressure valve order. The other manufacturers replied that they need to make samples first before they knew the results.

Alston felt the pressure. Coincidentally, he heard that the AAK HYDRAULIC VALVE paid great attention to the pressure spring. When we received his email, we understood that this hydraulic pressure valve has very high requirements for automatic adjustment of the pressure spring. We produced and supplied a batch of similar designs to a Russian customer as early as 2 years ago, so we sent him pictures of similar hydraulic pressure valves.

Alston felt that AAK HYDRAULIC VALVE could solve this dilemma and asked how long it would take to produce 1000 hydraulic pressure valves. We advised that the delivery time depends on the production time for the pressure spring, because of power limitation, the production capacity of the pressure spring is very low. According to the warehouse inventory, there are 440 inventories. For the remaining 600, according to the current power consumption, we conservatively estimate that it will take an additional 45-55 days. Therefore, only 400 hydraulic pressure valves can be shipped to him, and the remaining 40 pressure springs should be reserved for make samples for other customers.

For this pressure spring, most of our peers use carbon steel, which will cause the plasticity and toughness of this valve spool to be very general, the tensile strength is relatively weak, and the stability is difficult to control. There is no problem to use it for the general quality requirements.

As early as 5 or 6 years ago, AAK has replaced the carbon steel pressure spring with the piano steel wire pressure spring imported from South Korea. There were only a few manufacturers using it in the whole hydraulic industry in Ningbo. The piano steel wire pressure spring imported from Korea has high strength, good elasticity, fatigue resistance, creep resistance and toughness, smooth and clean surface, strong anti rust ability, specified tensile strength and torsional performance, and there will be no cracks, folds, scars, tensile cracks and

Free sample to support the new cooperation !!!!

Oil quenching & tempering spring steel wire

1.Material:50crsia, 55crsia, 60si2mna, 67crva, 65mn, 70#, 67a, 67b, 72a, 72b

2.The range of dia : 0.2-16.0mm

3.Application : for motor or valve

4.Tensile strength : according to customers request

5.Packing: spool or coil, wrapped by plastic

6.Moq: 1 ton/tons

7.Standard: gb/t18983-2003, astm a229m, astm a232m, astm a401m, jis g3560.

Tianjin wei jun metal products co, . Ltd

High tensile low relaxation steel pc wire
1)dia: 4.00mm, 4.80mm, 5.00mm, 6.00mm, 6.25mm, 7.00mm, 8mm, 9mm

2)type of surface: helix(screw), plain, indented.

3)standard: gb/t 5223-2002, astm a416, bs5896, jisg3536, iso9001- 2000 or according to customers' requirements

4)tensile strength: 1470mpa-1860mpa

5)packing and weight: coil at customer's requirement. (water-proof packing)

6)minimum order: 1-25tons

7)payment term: TT or LC

8)usage: low relaxation wire used for prestressed steel structure, prestressed and post-tensioning technology in large, medium and small sizes of various shapes of pc structures, such as civil engineering construction of large scale railroad, highway, etc.

9)inquiry please provide: standard(year), diameter, mechanical property(especially tensile strength), coil weight, packing dimension, quantity ect.

Nominal diameter
Min tensile strength
Min stress at 1% extension
Min elongation
Relaxation

We deals in the following products of India, China, Taiwan and Korea Origin:-
1) Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc.)
2) Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc.)
3) Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc.)
4) Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc.)
5) Steel Tube and Pipes (ERW, CRW, CRS, Black, Galvanized, Stainless)
6) Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7) Heavy Duty Props & Light Duty Props.
8) Nuts, Bolts, Nails & Fasteners
9) System Scaffolding, Base Plate & Adjustable Base.
10) Steel Tie Rod, Waller Plates and Wing Nuts.
11) Drop Forged and Pressed Sheet Metal Couplers of all types.
12) Steel Billets, Steel Angle & Steel Channels.

Price: After receiving complete details

We deals in the following products of India, China, Taiwan and Korea Origin:-
1) Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc.)
2) Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc.)
3) Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc.)
4) Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc.)
5) Steel Tube and Pipes (ERW, CRW, CRS, Black, Galvanized, Stainless)
6) Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7) Heavy Duty Props & Light Duty Props.
8) Nuts, Bolts, Nails & Fasteners
9) System Scaffolding, Base Plate & Adjustable Base.
10) Steel Tie Rod, Waller Plates and Wing Nuts.
11) Drop Forged and Pressed Sheet Metal Couplers of all types.
12) Steel Billets, Steel Angle & Steel Channels.



Price: After receiving complete details

We deals in the following products of India, China, Taiwan and Korea Origin:-
1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc)
2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc)
4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc)
5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless )
6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7)Heavy Duty Props & Light Duty Props.
8)Nuts, Bolts, Nails & Fastners
9)System Scaffolding, Base Plate & Adjustable Base.
10)Steel Tie Rod, Waller Plates and Wing Nuts.
11)Drop Forged and Pressed Sheet Metal Couplers of all types.
12)Steel Billets, Steel Angle & Steel Channels.

We specialize in the manufacture and export of carbon steel wire for more than six years. We supply low, middle and high carbon steel wires un-galvanized of diameters from 0.20mm to 14.00mm, and the galvanized from 0.20mm to 6.50mm. The galvanized wires are zinc-plated galvanized and hot-dipped galvanized. We output about 2500 tons every month according to din17223-1, gb/t4357-89, jis g 3521, en10270-1, din2078-90, astm a475 and so on.


In coil, spool and so on

We supply middle and high carbon steel wires ungalvanized and galvanized of diameters from 0.20mm to 14.00mm. The galvanized wires are zinc-plated galvanized and hot-dipped galvanized.

E output about 2500 m.Ton every month according to din17223-1, gb/t4357-89, jis g 3521, en10270-1, din2078-90, astm a475 standards and so on.

Stainless steel wire manufacturer and exporter in china.

1.Standard:gb/t 4240-2009 , gb/t 4232-93

2.Material of stainless steel wire :201, 202, 301, 302, 304, 304l, 316, 316l, 321, 430 etc.

3.Standard:aisi, astm, en, din, jis

4.Stainless steel wire type: round wire, flat wire, square wire, triangle wire, hexagonal wire, sector wire, trapezoid wire, heterogeneous wire

5.Wire diameter of stainless steel wire :0.15mm-4mm

6.Tensile strength: >520mpa

7.Elongation rate: >40%

8.Characteristics of stainless steel wire:

(1)excellent straightness, uniform and beautiful surface condition

(2)excellent coil-forming ability, high elasticity and high fatigue resistance

(3)strong corrosion resistance against exposure to the toughest atmosphere

7.Forming supply:in the form of coil, spool, or can be processed into cut wire and u type wire.

8.Packing of stainless steel wire:packed in coil:1.Inside with plastic film and outside with hessian

2.Inside with plastic film and outside with woven bag.

Packed in spool: spool specification according to customer's requirements

9.Full packing:

(1)coil packed in pallet.25kgs/roll, 50kgs/roll, 100kgs/roll or can be according to customers requirement.

(2)spool packing: each spool could load 1.0kg, 2.0kg, 3.0kg, 5.0kg, carton packing, outside wooden pallet or wooden cases .

10.Application of stainless steel wire:barbed wire, soft pipe, woven mesh, spring, nails, brush, wire rope,

Cleaning bal.


1.Packing of stainless steel wire:
Packed in coil:(1).Inside with plastic film and outside with hessian

(2)inside with plastic film and outside with woven bag.

Packed in spool: spool specification according to customer's requirements

2.Full packing:

(1)coil packed in pallet.25kgs/roll, 50kgs/roll, 100kgs/roll or can be according to customers requirement.

(2)spool packing: each spool could load 1.0kg, 2.0kg, 3.0kg, 5.0kg, carton packing, outside wooden pallet or wooden cases .

PRODUCT NAME:
0.13mm 14mm 4160mm dog leash constant force spring----
Stainless steel / starter spring / recoil spring / Flat spring / rewind spring / coil spring / Constant Force Spring / Constant Torque Spring
PRODUCT SCOPE:
Spring Thickness: 0.13mm
Spring Width: 14mm
Spring Length: 4160mm
Inner Diameter:5mm
Outer Diameter: 20mm
Hook size:
Spring Material: Stainless steel
HS Code: 73202090

Wire Gauge: single steel diameter size 1.4-4.8mm
Standard: AISI,ASTM,BS,GB,JIS
Alloy Or Not: Non-alloy
Type: Galvanized
Place of Origin: India and China

Application: High frequency coaxial cable, wire network, tram line
Insulation Material: noninsulated
Conductor Material: Copper Clad Steel
Conductor Type: Solid
Type: Bare
Place of Origin: India and China

Special Use: Free Cutting Steel
Wire Gauge: 1.8-14mm
Standard: AISI,ASTM,BS,DIN,GB,JIS
Application: ACSR Core , pulling pole ,overhead conductor, Messenger wire ,Static
Type: Galvanized
Origin : India and China

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.

Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.

We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.

The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.

Special Use: Cold Heading Steel
Wire Gauge: 1.8mm-5.5mm
Application: Construction
Alloy Or Not: Is Alloy
Type: Galvanized
Place of Origin: India and China

Wire Gauge: BWG6-BWG35(0.2mm-5.0mm)
Surface Treatment: Galvanized
Model Number: Q195/Q235
Place of Origin: Hebei,China (Mainland)

Special Use: Cold Heading Steel
Material: 45# /60#/70# High Carbon Steel
Model Number: 45# - 70#
Standard: AISI,ASTM,BS,DIN,GB,JIS
Application: Construction

PRODUCT NAME:
0.13mm 14mm 4160mm dog leash constant force spring----
Stainless steel / starter spring / recoil spring / Flat spring / rewind spring / coil spring / Constant Force Spring / Constant Torque Spring
PRODUCT SCOPE:
Spring Thickness: 0.13mm
Spring Width: 14mm
Spring Length: 4160mm
Inner Diameter:5mm
Outer Diameter: 20mm
Hook size:
Spring Material: Stainless steel
HS Code: 73202090

We deals in the following products of India, China, Taiwan and Korea Origin:-
Stainless Steel Wire

Customized Industrial Usage Stainless Steel metal Constant Force torsion memory Tension Spring
Material Available:Steel:1018,1213,12L14,1215,C45, etc.
Stainless Steel:201,301,303,304,316,416,420, etc.
Aluminum Alloy:5052,6061,6063,6082,7075,etc
Brass Alloy:360,36000,3601,3602,3603,3604,38500, etc.
Bronze:C51000,C54400, etc.
Plastic: Pom, ABS, Nylon, etc.
Treatment:Anodize, sandblast,polishing,nickel plating,electroplating,annealing,chrome plating, laser etc.