The 19 inches rack standard backup battery is based on Lithium iron phosphate battery, It has been designed to provide backup power for telecom equipment or energy storage system in household. It has excellent safety, high energy density, long lifetime, very nice temperature performance, green power newly of excellent safety and high reliability. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
The wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density, long service life, and easiness of installation and expansion. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
The wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density, long service life, and easiness of installation and expansion. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
The 19 inches rack standard backup battery is based on Lithium iron phosphate battery, It has been designed to provide backup power for telecom equipment or energy storage system in household. It has excellent safety, high energy density, long lifetime, very nice temperature performance, green power newly of excellent safety and high reliability. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
Product description 1. Model: ni-mh 12v d10000mah rechargeable battery pack(10s of fh-d10000). 2. Un, rohs, ce approved ni-mh battery pack. 3. Ni-mh battery pack oem orders are welcomed. 4. Ni-mh battery pack is widely used to consumer portable equipments, information devices, miner lamps, power tools, remote control toys, medical devices, vacuum cleaner, cordless phone, etc. 5. Bulk pack, blister card are available. 6. For ni-mh standard industrial series d size, other capacity are availabe from 2500mah to 10000mah. 7. Customizes shapes, capacity, and voltage are accepted. 8. Individual cells can be assembled in parallel or series into stacks as required by customers. 9. No memory effect, high voltage, high energy density, long cycle life. 10. Eco-friendly. Ni-mh 12v d10000mah rechargeable battery pack(10s of fh-d10000) CellNi-mh Model10s of fh-d10000 Nominal voltage12v Nominal capacity10000mah Minimal capacity9800mah Standard charge1000 ma, 16 hrs Rapid charge: 5000 ma, 2.2 hrs (control required) Continuous discharge Less than 15000 ma Final discharge voltage1.0 v (less than 1.0c) Service life =500 cycles (iec61951-2-2003) Dimension(w*l*h) 65mm*165mm*65 Weight Approx. 1800 g Ambient temperature:Standard charge: 0~45 ºc Rapid charge: 10~40 ºc Discharge: -20~50 ºc Store (65+20% rh)Less than 360 day: -20~30 ºc Less than 30 day: -20~40 ºc Notes: 1."c" behind the model no. Refers to normal consumer series ; 2. Capacity obtained after charge at 0.1c for 16 hrs and discharge at 0.2c to 1.0v at 25 ºc; 3. Control required: 1) -?v: 0 ~ 5mv 2) d t / d t: 0.8 ºc/ min 3) t co: 40 ~ 45 ºc
Type:ni-mh Size:aa Usage: walkman, shavers, electric toys, electronic tools , solar light, exit sign Size:aa Height:49.5mm Diameter:14.5mm
Type:ni-mh Size:aa Packing:paper or blister card Usage: walkman, shavers, electric toys, electronic tools , solar light, exit sign Size:aa Diameter:14.5mm Height:49.5mm
Product Description Tubular Plate Battery 2V 250AH (OPzS250-2) Specifications The OPzS battery is a traditional tubular plate flooded battery which offers 20 years design life with a cycle life of 1800 cycles at 80% Deep Of Discharge. This range is most suited for all standby power applications that require the highest levels of reliability and security. Characters 1. Use gel electrolyte, with nice performance on wide temperature range, suitable for harsh environments coperation. (-40�º C~60�º C) 2. Made by tubular positive plate materials, monthly self-discharge rateâ?¤ 1.5% 3. Excellent recover ability of Cycling and deep discharge, more than 800 times cycle life at 100% deep discharge, improve the system reliability effectively. 4. Floaing design life time up to 20 years, in the coperation of normal float charging, capacity keeps stable, attenuation rate stays low. Application Wind power system, Solar power system, Emergency lighting alarm systems, UPS(Uninterruptible power sypply) Telecommunications, Telephone exchanges control equipment, EPS instrumentation, Bank ATM System, Medical equipment, Fire and security system and so on. Capacity 77�°F(25�ºC) 100 hours rate(3.00A 1.85V) 300Ah 10 hours rate(25.0A 1.80V) 250Ah 5 hours rate(42.0A 1.80V) 210Ah 3 hours rate(62.5A 1.75V) 187Ah 1 hour rate(132.0A 1.67V) 132Ah Internal Resistance Full charged battery 77�°F(25�ºC):0.0008�© Capacity affected by Temperature (10 hour rate) 104�°F(40�ºC) 102% 77�°F(25�ºC) 100% 32�°F(0�ºC) 85% 5�°F(-15�ºC) 65% Self-Discharge 68�°F(20�ºC) Capacity after 3 month storage 90% Capacity after 6 month storage 80% Capacity after 12 month storage 60% Max discharge current77�°F(25�ºC):1250A(5S) Charge (Constant Voltage) Float:2.23 to 2.27V/77�°F/(25�ºC) Cycle:2.38 to 2.42V/77�°F/(25�ºC) Max Current:25A
8 Bay AA AAA Battery Charger Smart charger passed UL certification comes with chip control, when the battery is fully charged, it will automatically stop charging, and with LED indicator Size 155mmÃ??74.5mmÃ??29mm (L/W/H) Input DC 5.0V 2A Output DC 1.4V 250mA Safety protected: Controlled by MCU,automatically when charged full (except for 9V battery) * Short circuit protection and reverse polarity protection * Overheat-detection to prevent over-charging Charging control mode Ni-MH and Ni-CD battery 1)-DV control. 2)0 DV control. 3)Maximum DV control. Net weight 120g Certificate CE, ROHS, FCC Package: 1 x Battery Charger 1 x User manual 1 x USB Cable OEM Acceptable
8 Bay AA AAA Battery Charger Smart charger passed UL certification comes with chip control, when the battery is fully charged, it will automatically stop charging, and with LED indicator Size 155mmÃ??74.5mmÃ??29mm (L/W/H) Input DC 5.0V 2A Output DC 1.4V 250mA Safety protected: Controlled by MCU,automatically when charged full (except for 9V battery) * Short circuit protection and reverse polarity protection * Overheat-detection to prevent over-charging Charging control mode Ni-MH and Ni-CD battery 1)-DV control. 2)0 DV control. 3)Maximum DV control. Net weight 120g Certificate CE, ROHS, FCC Package: 1 x Battery Charger 1 x User manual 1 x USB Cable OEM Acceptable
8 Bay AA AAA Battery Charger Smart charger passed UL certification comes with chip control, when the battery is fully charged, it will automatically stop charging, and with LED indicator Size 155mmÃ??74.5mmÃ??29mm (L/W/H) Input DC 5.0V 2A Output DC 1.4V 250mA Safety protected: Controlled by MCU,automatically when charged full (except for 9V battery) * Short circuit protection and reverse polarity protection * Overheat-detection to prevent over-charging Charging control mode Ni-MH and Ni-CD battery 1)-DV control. 2)0 DV control. 3)Maximum DV control. Net weight 120g Certificate CE, ROHS, FCC Package: 1 x Battery Charger 1 x User manual 1 x USB Cable OEM Acceptable
8 Bay AA AAA Battery Charger Smart charger passed UL certification comes with chip control, when the battery is fully charged, it will automatically stop charging, and with LED indicator Size 155mmÃ??74.5mmÃ??29mm (L/W/H) Input DC 5.0V 2A Output DC 1.4V 250mA Safety protected: Controlled by MCU,automatically when charged full (except for 9V battery) * Short circuit protection and reverse polarity protection * Overheat-detection to prevent over-charging Charging control mode Ni-MH and Ni-CD battery 1)-DV control. 2)0 DV control. 3)Maximum DV control. Net weight 120g Certificate CE, ROHS, FCC Package: 1 x Battery Charger 1 x User manual 1 x USB Cable OEM Acceptable
AS PS ABS PLA HDPE Granules Acrylonitrile - styrene copolymer. Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as engineering plastics.Excellent heat resistance and solvent resistance. Application. 1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases. 2. Special grade: blade of fan, batteries housing, lighters. 3. Refrigerator Sleeves, Miscellaneous 4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling 5. High Transparency, Heat Resistance, chemical resistance PC + Glass Fiber reinforced (GF) The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm. Grade: (ML3410-30 / MH3515-30 / MN-3110-30) 1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF) General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact. Application: Watch parts, switches and nobs, OA equipment. 2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF) Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage and dimensional stabilities. Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames. 3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF) MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance, surface aesthetics and weld line strengths. Applications: Meter cases, electrical and electronic housings.
Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
NI-MH / NI-CD battery NI-MH / NI-CD Battery Packs Ni-MH / Ni-Cd 9V Rechargeable Batteries NI-MH / NI-CD button cell battery
The rechargeable batteries for power tools, toys, mobile phone and so on. Carton box.
NI-MH Rechargeable battery: AA, AAA, A, SC, C, D.