Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
Circular steel pipe is both openings and have hollow concentric sections of steel larger than the surrounding. The specifications of steel pipes are indicated by appearance dimensions and inner diameter and wall thickness, with a wide range of dimensions from very small diameter capillary to large round steel pipe of several meters in diameter. Round steel pipes can be used for pipelines, thermal equipment, machinery industry, petroleum geological drilling, containers, chemical industry, and special uses. It can be divided into seamless, ERW, LSAW, SSAW steel pipe according to the production process.
Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.
Spring steel strip Steel grade 65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc Thickness 0.08-4.0mm Width 3-400mm Hardness
1.The Mild steel grade are:DCO01,SPCC,Q235C,Q235D,Q235E;Q345B,Q345C,Q345E,Q345E. 2.Shipbuilding steel plate.Mainly used in ship build. The grades are:A32,AH32,A36,AH36,DH36,AH36,D32,DH32 ETC. 3.Carbon structural and high strength steel plate.Mainly used in bridges,power station equipment,lifting machinery,mining macinery and other large welding structural parts.Q460C/D/E,Q235B/C/D/E,Q609C/D/E 4.Alloy Steel Plat.Mainly used in Machinery,structure,tool,etc. 40Cr,50Mn,65Mn,15CrMo,35CrMo,42CrMo etc.
Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration. Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe. Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes. It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.
Yes this lot is more than 90 % natural, Yes a composite film. Color: Natural and Blue
Alloy cast steel rolls Wooden packed condition
Spring steel strip Steel grade 65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc Thickness 0.08-4.0mm Width 3-400mm Hardness <200HV, 200-300HV, 300-550HV Edge slit edge; both rounded; one side round, one side slit; square etc Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc Tolerance thickness +/-0.01mm max; width +/-0.05mm max Physical propety Tensile strength: 450-1850N/mm2
Spring steel strip Steel grade 65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc Thickness 0.08-4.0mm Width 3-400mm Hardness <200HV, 200-300HV, 300-550HV Edge slit edge; both rounded; one side round, one side slit; square etc Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc Tolerance thickness +/-0.01mm max; width +/-0.05mm max Physical propety Tensile strength: 450-1850N/mm2
65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2
65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2
Product Name Hot rolled steel sheet Thickness plate:0.35-200mm strip:1.2-25mm Length 1.2m-12m or according to customer\'s special request width 610,760,840,900,914,1000,1200,1250mm Tolerance Thickness: +/-0.02mm, Width:+/-2mm Material grade Q195 Q215 Q235 Q345 SS490 SM400 SM490 SPHC SPHD SPHE SPHF SEA1002 SEA1006 SEA1008 SEA1010 S25C S35C S45C 65Mn SPHT1 SPHT2 SPH3 SPH4 QstE Others as your requirement surface iron gray (low carbon plate), brown (special alloy plate, the high carbon plate), partial ochre (weather resistance), with temperature oxidation pattern, than manufacture rough surface
Material Grade CK50,CK67,CK75, CK95,51CrV4,75Cr1 ,SK5, SAE1070,SAE1074,C67S ,C75S etc. Condition hardened and tempered, cold rolled annealed Hardness 18-55HRC Surface polish-blue,gery-blue,polished bright golden etc. Thickness 0.08-3 mm Width 3-1500 mm Tolerance thickness+/-0.01mm max,width +/-0.05mm max Tensile strength 540-1575N/mm2
