New Fabric Cuttings (hosiery Clips) Mix Colors And Mix Quality (cotton, Cotto/lycra Etc.) Bales Waste.
Materials are suitable for the production of felt - shoddy (for disintegration into fibers) and other apllications.
Post industrial.
Can load in 1x40HC container aprox. 25-27 MT net.
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels. Incoloy 825 is a completely austenitic nickel iron chromium alloy, stabilized by titanium and added with copper and molybdenum. Incoloy 825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments.
The Incoloy825 has the following functions:
Good resistance to stress corrosion cracking.
Good resistance to pitting and crevice corrosion
Good oxidation resistance and non oxidative thermal acidity.
It has good mechanical properties at room temperature and high temperature up to 550
Certification of pressure vessels with manufacturing temperatures up to 450 C
Incoloy 825 metallographic structure:
Incoloy 825 alloy has a stable face centered cubic structure. Chemical composition and appropriate heat treatment ensure that the corrosion resistance will not be weakened by sensitization.
Incoloy825 Corrosion resistance:
Incoloy825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments.
Incoloy825 is widely used in various industrial fields where the working temperature is no more than 550.
Typical applications include:
Heating pipes, containers, baskets and chains for sulfuric acid pickling plants.
Seawater cooling heat exchanger, marine product pipeline system, acid gas environment pipeline.
Heat exchanger, evaporator, washing, immersion tube, etc. In phosphoric acid production.
Air heat exchanger in petroleum refining
Food Engineering
chemical process
Flame retardant alloy for high-pressure oxygen
Product name
INCOLOY Alloy 825
Grade
INCOLOY Alloy 825
Thickness range
0.3mm-3.0mm,
Width range
600mm-1500mm
Length
2000mm, 2438mm, 3048mm
Size
1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required
a promising alternative to traditional proton exchange membrane fuel cells due to their lower cost and ability to use non-noble metal catalysts. A key component in is the anode electrode, which requires a conductive and durable material that can withstand the harsh alkaline conditions present in the fuel cell. Nickel felt is a material that has shown promise as an anode substrate for due to its high conductivity and durability.
Alkaline Electrolyte Membrane Fuel Cells have been gaining increasing attention due to their superior performance compared to Proton Exchange Membrane Fuel Cells . have faster electrochemical kinetics, lower catalyst costs, and weaker corrosion, making them an attractive alternative to . One of the main advantages of is the use of an alkaline electrolyte, which allows for the benefit of non-precious-metal catalysts, making commercialization more feasible. While are technically similar, the key difference is the use of a solid instead of an acidic in . Overall, offer significant advantages over and are a promising technology for fuel cells.
Detailed Specifications
Material: N4 N6 N8 Ni200 Ni201
Thickness: 0.25 mm - 5 mm
Pore size: 20 microns
Length x Width: Customizable
Operating Temperature: Up to 200C
Operating pH: 1-14
Compatibility: Compatible with various AEMFC systems
We offer a wide plethora of Zinc in many forms including LME registered
and non registered Special High Grade Ingots and Jumbos, cathodes,
dust, foil, granules, powder, pieces, anodize activated powder, shot,
and a mossy form.
Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is
malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air
at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc
on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
We are able to supply Tin in many forms including LME registered and
non registered, ingots, slabs, bars, foil, granules, powder, anodized
activated powder, shot, wire, sticks, ingots, and “mossy tin”.
Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline
structure. The element has two colours, with a cubic structure which changes at
allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is
cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This
change is affected by impurities such as Aluminium and Zinc, and can be prevented
by small additions of Antimony or Bismuth.
We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.
We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
In compliance with international technical requirements, nickel fiber felt is manufactured from micron-level pure nickel fiber using a specific felt layering method and an ultra-high temperature vacuum sintering process.
Strong corrosion resistance, wide specific surface area, homogeneous pore size distribution, high porosity, good water permeability, good heat dissipation, stable performance, and a long service life are all characteristics of nickel fiber felt.
In the fuel cell, military, aerospace, commercial, medical, and other industries, nickel fiber felt is frequently utilized. In specifically, proton exchange membrane water electrolysis uses hydrogen fuel cell diffusion media as the gas diffusion layer (GDL).
Product parameters
Material:Nickel fiber
Size:Thickness: 0.2mm,0.4mm,0.8mm,1.0mm,etc (can be customized)
Shape:Polygon,round,ring,disc,etc. (can be customized)
Porosity :60%-80%
Features:
1.High porosity
2.High temperature resistance
3.Corrosion resistance
4.Good mechanical strength
Applications
1.Filtration: The sintered nickel felt is commonly used for filtration of gases and liquids in industries such as oil and gas, chemical processing, and pharmaceuticals.
2.Catalysis: This material can be used as a catalyst support in chemical reactions due to its high surface area and porous structure.
3.High-temperature applications: The sintered nickel felt is often used in high-temperature applications such as gas turbines, fuel cells, and aerospace.
4.Electronics: The sintered nickel felt can be used as a conductive material in electronic devices due to its high conductivity and stability.
5.Energy storage: This material can be used as an electrode material in energy storage devices such as batteries and capacitors due to its high surface area and conductivity.
Package and Shipment
1. Titanium Plate Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation.
2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
Material: N4 N6 Ni200 Ni201
Thickness: 0.25mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm ,1.0mm, 1.2mm etc.
Micron: 3-100um
Size: 100x100mm, 200x200mm, 300x300mm, 400x400mm, other size can be customized.
Porosity: 50%-90%
1) The thickness, pore size, unit weight, porosity and other performance indicators of nickel fiber felt can be comparable to nickel foam.
2) Nickel fiber felt has the characteristics of larger specific surface area, higher tensile strength and better flexibility than foamed nickel, and is suitable for making large-capacity, high-current nickel-metal hydride batteries.
Application
Filter material
Photocatalyst series air filter screen
Chemical catalyst and support materials
Battery electrode material
Heat exchange and adsorption materials
We source high quality Ores and Others that are majorly used in numerous of Industries for diverse uses. The wide collection of Mineral Ores is free from impurities and rich in other essential features. Our esteemed client’s can avail the wide gamut of Mineral Ores at very pocket friendly price.
We deal in
* Bauxite ore
* Copper ore
* Lead ore
* Nickel ore
* NPI -Nickel pig iron
* Tin ore
* Zinc ore etc
We offer a wide plethora of bluish-white lustrous metal Zinc. It is brittle at ambient temperatures but is malleable at 100 to 150C. Being a good conductor of electricity it has a wide usage in numerous applications. We offer this high quality Zinc to our clients at very economical price.
Properties
Melting point : 419.5C
Boiling point : 911C
Resistivity : 5.96 micro ohm-cm at 20 C
Standard state : solid at 298 K
Color : bluish pale grey
Classification : Metallic
We are engaged in offering Special High Grade Ingots and Jumbos of about 1 M. Ton size. LME registered / Non-registered / Special High Grade Ingots and Jumbos as well as High Grade and Zamak 3 etc are offered by us.
Nickel fiber felt is a material made from micron-sized pure nickel fibers using special felting and high-temperature vacuum sintering processes, in accordance with international technical standards.
Nickel fiber felt possesses excellent three-dimensional porous structure, characterized by high porosity, large surface area, uniform pore size distribution, strong corrosion resistance, good water permeability, effective heat dissipation, high current density, low voltage, stable performance, and long service life.
Product Name : EDTA Nickel / Chelated Nickel
Chemical Name : Ethylenediaminetetraacetic acid, Nickel complex , Edetate Nickel; Nickel ethylenediaminetetraacetate
CAS No.25481-21-4
Color & Physical Form : Blue Powder
Active Ingredient : Ni EDTA
Assay ;Min. 98%
Nickel Content : Min. 13% as Ni
pH (1% aqueous solution) : 4.5 - 5.5
