Item No.: 7198-328 Size : 39-48 (5-14) MOQ : N/A Soles : 7198 Dual Density Product Name : Safety Boot Standard : S1P SRA Sizes : 39 - 48 (5-14) Colors : Black Product Number : 7198-328 Standard : S1,S2,S3 TOE : Steel Midsole : Steel Sole : Dual or Mono Color : Black / Brown Materials Upper : Buff Barton Lining : Cambrella TOE: Steel Midsole : Steel Footbed / Socks : Moulded Antistatic Sole: Single/Double Density PU/PU Certified : EN ISO 20345: 2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: 7198 - 328 Size : 39 - 48 (5-14) Moq : N/A Soles : 7198 Dual Density Anti Skid Anti Static Insole Breathable Heat Resistant Sole Oil Resistant Shock Absorber Steel toe / Kavlar Steel Toe Cap Additional Product Info Overview Product Name : Safety Boot Standard : S1P SRA Sizes : 39 - 48 (5-14) Colors : Black Available Options Product Number : 7198-328 Standard : S1,S2,S3 TOE : Steel Midsole : Steel Sole : Dual Or Mono Color : Black / Brown Materials Upper : Buff Barton Lining : Cambrella TOE : Steel Midsole : Steel Footbed / Socks: Moulded Antistatic Sole : Single/Double Density PU/PU Certified : EN ISO 20345: 2011 Boot Care * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% Comfort Guaranteed * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 7198-02 NR Size : 39 - 48 (5-14) Soles : 7198 Nitrile Rubber SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Breathable Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 SRA Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 7198-02 Nr Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Color: Black / Brown MATERIALS Upper: Buff Barton Lining : Cambrella Toe : Steel Midsole : Steel Footbed / Socks: Moulded Antistatic Sole : Single Density Nitrile Rubber Certified : NA BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet.
Single Jersey, pique, interlock quality use for making T-shirts, ready made garments. Price of product ( USD price or FOB price) : 1.5-2.5 $ per Kg Product origin : China / Vietnam Key Specifications/Special Features : Knitting fabric stocks Place of Origin China/Vietnam Payment Term TT Delivery Time Shipment within 10 working Minimum Order Size and Packgaing details : Packing 10-25 kg in roller or fold format, Minimum Order Quantity 20ft container
Product Description : single jersey, pique, interlock quality use for making T-shirts, ready made garments. Price of product ( USD price or FOB price) : 1.5-2.5 $ per Kg Product origin : China / Vietnam Key Specifications/Special Features ; Knitting fabric stocks Place of Origin China/Vietnam Payment Term TT Delivery Time Shipment within 10 working Minimum Order Size and Packgaing details ; Packing 10-25 kg in roller or fold format, Minimum Order Quantity 20ft container
Product Description : Single jersey, pique, interlock quality use for making T-shirts, ready made garments. Price of product ( USD price or FOB price) : 1.5-2.5 $ per Kg Product origin : China / Vietnam Key Specifications/Special Features : Cotton Spandex Jersery Solid Colors Place of Origin China/Vietnam Payment Term TT Delivery Time Shipment within 10 working days Minimum Order Size and Packaging details : Packing 10-25 kg in roller or fold format Minimum Order Quantity 20ft container
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface
Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface
Product Introduction SANDI AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-750VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface (Optional)
IP65 explosion-proof and waterproof Zone 2 inverter is the most advanced DC to AC inverter, built in low frequency isolation transformer, IP65 industrial explosion proof rating enclosure, widely used in coal mines, wineries, chemical plants. Application: 1. Zone 1& 2 Hazardous locations, such as: underground coal mines, wineries, chemical plants, etc. 2. Environment with IIA, A A IIB, IIC types of explosive gas, such as: Flour mills, Aluminum powder plant, Metal mine factory, Graphite factory.etc. 3. Indoor (IP54) or outdoor(IP65) 4. Low noise/ Silent working mode 5. Explosion proof/ Spark-proof/ Waterproof/ Anti-dust/ Shock-proof. Features: 1. Durable: 4.0 thick steel plate seamless welding, surface spray, beautiful appearance. 2. Explosion proof rating: Explosion-proof standard is EXdIIBT4. 3. More reliable: Built-in low frequency isolation transformer, strong ability of anti-interference. 4. Widespread application: DC to AC, Single phase to Three phase, High voltage to Low voltage or Low voltage to High voltage. 5. Pure sine wave output, quick instant response speed 6. Excellent performance of taking load, it can take a variety of loads, such as: halide lamps, motors, welding machines, precision machine tools, fluorescent lamps, energy-saving lamps, etc. 7. Powerful protection functions: With over-current, over load, under voltage, over voltage, short circuit, over heating and other protection. 8. High protection class: With good performance of anti-dust, waterproof,shockproof. 9. 100% full power output: Can be 7* 24 hours continuously working 10. Accept customized: Can be customized according to customers' requirements. 11. Adopted the sixth generation IPM intelligent power module from Mitsubishi,high efficiency and stable performance, intelligentized, modular, simple structure design, very easy and low cost for future's maintenance. 12. Advanced functions: 1) Setting flexible: The DC input voltage range, output voltage, output frequency all can be set. 2) Two kinds of work mode: Can add AC bypass input(Optional), Battery priority, AC bypass as back up or AC bypass priority, battery as back up. 3) Two kinds of start mode: Variable frequency start and Step down voltage start. with stronger capacity to drive inductive load. 4) RS485 remote monitoring(Optional) 5) Big LCD color screen display, modular structure very easy for future's maintenance 6) High efficiency > 94% and low loss, design service life > 15 years.
RP-2001 is a UL listed six-zone fire alarm control panel for single and dual hazard deluge and preaction applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring water-based releasing.! Features & Benefits: 1. Designed for sprinkler standards NFPA 13, 15 and 16. 2. Dual hazard operation. 3. Cross-zone (double-interlock) capability. 4. Six programmable Style B (Class B) IDCs (Initiating Device Circuit). 5. Optional Digital Alarm Communicators
RP-2002 is a UL listed six-zone fire alarm control panel for single and dual hazard agent releasing applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring agent-based releasing. Features & Benefits: Disable/Enable control per input zone and output zone. Extensive transient protection. Dual hazard operation Meets International Building Code (IBC) seismic requirements
Bricks
Our main exporting brand of refractory bricks are: Direct bonded magnesia-chrome bricks ííííthe product is manufactured by taking high purity magnesia and high quality chrome as raw materials through the process of high pressure moulding and high temperature burning.It has a good thermal shock resistance and volume stability and is applied in the cement and glass industries. Main physiochemical property indexes of product Chemical composition and technical performance Product brand Lzmg-5 Lzmg-8 Lzmg-12 Lzmg-15 Mgo(%) í²70 í²65 í²60 í²55 Sio2(%) ín1.5 ín1.5 ín1.8 ín1.8 Cr2o3(%) í²5.0 í²8.0 í²12.0 í²15.0 Apparent porosity(%) ín18 ín18 ín18 ín18 Cold crushing strength(mpa) í²40 í²40 í²40 í²40 0.2mpa refractoriness under load t0.6(oc) í²1650 í²1650 í²1650 í²1650 Thermal shock resistance(1300oc air cooling) í²20 í²20 í²20 í²20 Also we specially in exporting submerged entry nozzle, sliding plate, ladle and tundish nozzles and well block, etc. Herewith please find some typical refractory material which we have been exported for your reference: Ladle, tundish nozzles and well blocks Item Chrome corundum nozzle Corundum nozzle Al2o3-sic-c nozzle Spinel-c nozzle Lt-70 nozzle Lt-85 nozzle Upper porous nozzle for Tundish Al2o3 (%)í² 90 93 65 55 70 85 80 Cr2o3 (%)í² 2.5 13(mgo) 2.5 C (%)í² 22 7 10 7 3 A.P. (%)ín 2.9 24 8(impre-gnated) 8(impre-gnated) 15 15 24 B.D. (g/cm3) í² 1790 2.95 2.7 2.7 2.7 2.9 Refractoriness (íµ) í² 1550íµx3h 1790 Linear change on reheating(%) +0.1-+0.3 1600íµx3h +/-0.5 Wooden pallets
Our company sells high quality fresh cut, kiln dry and air-dry hardwood firewood stached into 1,8 or 2RM boxes. Our Firewood is sold by pallet 100x120x200 cm. 30 cm in length (2RM). And can be pallets sizes 85*120*200cm, lenght of the sticks be 25cm. Posibility packing in bags. We are offering you: - Hornbeam Firewood - Fir Firewood - Ash Firewood - Alder Firewood - Oak Firewood - Birch Firewood - Spruce Firewood - Beech Firewood - Dried Kiln Firewood Super dry firewood, ready to use immediate. Lights easily, gives great heat output. Spreads nice oudour while burning. Conveniently packed in Economy box, this forewood can be stored outside without restacking. Since wood is well dried, logs can as well be places indoors: it has no insects nor mould. The main lenght of logs is 25cm, 30cm. We can also offer you lengths and sizes by your request We are offering you: - Hornbeam Firewood - Fir Firewood - Ash Firewood - Alder Firewood - Oak Firewood - Birch Firewood - Spruce Firewood - Beech Firewood - Dried Kiln Firewood Super dry firewood, ready to use immediate. Lights easily, gives great heat output. Spreads nice oudour while burning. Conveniently packed in Economy box, this forewood can be stored outside without restacking. Since wood is well dried, logs can as well be places indoors: it has no insects nor mould. The main lenght of logs is 25cm, 30cm Our company sells high quality fresh cut, kiln dry and air-dry hardwood firewood stached into 1,8 or 2RM boxes. Our Firewood is sold by pallet 100x120x200 cm. 30 cm in length (2RM). And can be pallets sizes 85*120*200cm, lenght of the sticks be 25cm. Posibility packing in bags. We are offering you: - Hornbeam Firewood - Fir Firewood - Ash Firewood - Alder Firewood - Oak Firewood - Birch Firewood - Spruce Firewood - Beech Firewood - Dried Kiln Firewood Super dry firewood, ready to use immediate. Lights easily, gives great heat output. Spreads nice oudour while burning. Conveniently packed in Economy box, this forewood can be stored outside without restacking. Since wood is well dried, logs can as well be places indoors: it has no insects nor mould. The main lenght of logs is 25cm, 30cm. We can also offer you lengths and sizes by your request Our company sells high quality fresh cut, kiln dry and air-dry hardwood firewood stached into 1,8 or 2RM boxes. Our Firewood is sold by pallet 100x120x200 cm. 30 cm in length (2RM). And can be pallets sizes 85*120*200cm, lenght of the sticks be 25cm. Posibility packing in bags. We are offering you:
