Silicon Ore is an ore that drops Raw Silicon which can be used in the Circuit Fabricator to craft Basic Wafers, Advanced Wafers, or Blue Solar Wafers. It can be destroyed using any type of pickaxe, but it will only drop Raw Silicon if you use an Iron Pickaxe, Heavy Duty Pickaxe, Diamond Pickaxe, or Desh Pickaxe.
Silicon Dioxide, E551, CAS no.7631-86-9, white powder. Silicon dioxide (SiO2), also known as silica, is a natural compound made of two of the earth's most abundant materials: silicon (Si) and oxygen (O2). Silicon Dioxide is a common additive in the production of foods, where it is used primarily as a flow agent in powdered foods, or to absorb water in hygroscopic applications used in silica gel, control moisture levels to avoid prevent certain goods from going bad. It is often used in cheese, fat spreads, confectionery, dried vegetables, etc. As an experienced Silicon Dioxide manufacturer and supplier, we has been supplying and exporting Silicon Dioxide for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Silicon Dioxide Specification Item Standard Appearance White powder Purity (SiO2, %) 96 Oil absorption (cm3/g) 2.0~ 3.0 Loss on drying (%) 4.0~ 8.0 Loss on ignition (%) 8.5 BET (m2/g) 170~ 240 pH (10% solution) 5.0~ 8.0 Sodium sulfate (as Na2SO4, %) 1.0 Arsenic (As) 3mg/kg Lead (Pb) 5 mg/kg Cadium (Cd) 1 mg/kg Mercury (Hg) 1 mg/kg Total heavy metals (as Pb) 20 mg/kg Total plate count 500cfu/g Salmonella spp./ 10g Negative Escherichia coli/ 5g Negative
Product description. 1.Chemical name: Methyl silicone oil 201 2.Alias: PDMS/ polydimethylsiloxane 3.Viscosity: 350�± 10% 4: Volatile fraction (%) < 0.5 5:Appearance and Properties: colorless transparent dense liquid Products Description Melting point â??59 �°C(lit.) Boiling point 101 �°C(lit.) density 0.963 g/mL at 25 C vapor density >1 (vs air) vapor pressure 270 C (518 F) storage temp. 2-8C form Oily Liquid color Clear colorless Specific Gravity 0.853 Odor Odorless Water Solubility PRACTICALLY INSOLUBLE
Appearance White or Light Yellow Emulsion pH 6.5-8.5 Emulsion Lonic Weak Anionic Appropriate Thinner 10-30 â?? Water Thickening Standard GB/T 26527-2011 Organic Silicon Defoamer 1. The defoamer is composed of polysiloxane, modified polysiloxane, silicone resin, white carbon black, dispersing agent and stabilizer, etc. 2. At low concentrations, it can maintain good elimination bubble suppression effect. 3. Foam suppression performance is prominent 4. Easily dispersed in water 5. The compatibility of low and foaming medium 6. To prevent the growth of microorganisms Advantage It is composed of dispersant and stabilizer, low dosage, good acid and alkali resistance, stable chemical properties, easy to disperse in water, effectively prevent bacterial growth. The properties are stable during storage. Application 1. Papermaking chemical pulping high temperature vacuum or pressure in the defoaming in pulp washing machine 2. When the alkali refining agent of textile industry, inhibit elimination of treatment before 3. Circuit board cleaning 4. Oil mud defoaming in the process of mining 5. Textile printing and dyeing processing 6. Agricultural chemicals
High Purity Silicon Metal Powder Grade 3N-1 3N-2 4N 5N Specification Element content Si 99.7% 99.9% 99.99% 99.999% Fe 0.05%
Silicon metal is a product of high quality silicon ore and coke smelted in an electric furnaces. Used in electro, metallurgy and chemical industry. It is silver gray or dark gray powder with metallic luster, which be of high melting point, good heat resistance, high resistivity and superior oxidation resistance, it's called "industrial glutamate", which is an essential basic raw material in hi-tech industry. Product use 1) Widely applied to refractory material and power metallurgy industry to improve the heat resistance, wear resistance and oxidation resistance. 2) In the chemical line of organic silicon, industrial silicon powder is basic raw material that high polymer of organic silicon formatting. 3) Industrial silicon powder is sublimated into monocrystalline silicon, which is widely used in highttech field as an essential raw material for integrated circuit and electronic element. 4) In metallurgy and foundry line, industrial silicon powder is regarded as to be iron base alloy additive, the alloy pharmaceutical of silicon steel, thus improve the steel hardenability. 5) These are used in high-temperature material production in order to manufacture enamels and pottery. These also cater the demands of semiconductor industry by producing ultra-pure silicon wafers.
Pieces in One Package 1 Packs in One Boxbag 288 Small Boxes 1224 Boxesbags in 1x40 Hc Container 1166 Boxesbags in One Truck Outer Box Width Mm 1500 Outer Box Length Mm 330 Outer Box Height Mm 405 Volume Cbmm 470 Net WeightKgs 006282 Bagbox 798 Gross Weight Kgs Bagbox 808 Exw Price Per Bagbox Usd 11520
Pieces in One Package 1 Packs in One Boxbag 288 Small Boxes 1224 Boxesbags in 1x40 Hc Container 1166 Boxesbags in One Truck Outer Box Width Mm 1500 Outer Box Length Mm 330 Outer Box Height Mm 405 Volume Cbmm 470 Net WeightKgs 006282 Bagbox 798 Gross Weight Kgs Bagbox 808 Exw Price Per Bagbox Usd 11520
Silicon carbide si made from hte mixture of pure silica sand and green petroleum coke in ultra high power acheson furnace. Electric current is passed through t h e conductor,bringing about a chemical reaction ni which the carbon ni the coke and silicon ni the sand combined ot form SIC and carbon monoxide gas. Silicon carbide si With annual capacity for 60,000 tons of silicon carbide, we can provide different grade of silicon carbide to meet different clients' requirements, such as 70% SIC, 80% SIC, 85% SIC, 90% SIC, 93% SIC and 98% SIC, etc.We also provide customized size for 90% SIC and 98% SIC, such as 200 mesh and 325 mesh Fe203 Al203 Free carbon 3,5%MAX Moisture Size(mm) Ha-SIC-01 90% min. 1.5% max. 15.% max. 35.% max. 0.5% max. 1-5/1-10 HQ-SIC-02 90% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-10 HQ-SIC-03 88% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-1/1-10 HQ-SIC-04 98% min. 0.6% max. 0.6% max. 0.2% max. 0.5% max. 0-1/1-3 HQ-SIC-05 70% min. 2% max. 1% max. 10% max. 0.5% max. 1-10
Our organic Fertilizer is a combination of natural silicon minerals and high quality organic matters. It contains high level of active silicon and organic matters. It improves soils physical and chemical structure and prepares it for high-density and high-yield agriculture. Apart from speeding up growth, it also improves resistance of plants against pests, fungal and other diseases. Our fertilizer provides all of plant-needed macro- , micro- nutrients and trace elements. Specifications: - High content of active (plant available) silicon and organic matters. Improve soil conditions, physical and chemical structure; adjust soils pH to suitable range for plants. - Loosen up hard soils. Increase the capacity of soils to retain beneficial nutrients. Reduce the use of chemical fertilizers. - Improve plants resistance against pests, fungal and other diseases. Suitable for organic farming. - Silicon accumulated on plant leaves help reduces transpiration rate making them more drought tolerant. - Contain plant-needed macro-, micro-nutrients and trace elements. Can be used for all stages of plant growth. - Help fruits and vegetables taste better and last longer, extending shelf-life. We provide both our brand and OEM with small minimum order.
Product Description Food grade liquid silicone is used to .candy, cake and cholocate and soap mold and making artificial stone,cement and gypsum. Food grade quality silicone with nontoxic,Excellent fluidity, high tear and tensile strength, High duplication times repeated use, easy to demould,High temperature resistance and cure can be accelerated by heat Model 6210 6215 6220 6225 6230 Mixing ratio (A:B) 1:1 1:1 1:1 1:1 1:1 Hardness (Shore A)â?¥ 10 15 20 25 30 Tear-strength (kgf/c m�²)â?¥ 16 18 20 21 22 Viscosity (A/B mixed 25�°C mpa.S) 8000�±2000 8000�±2000 10000�±2000 10000�±2000 10000�±2000 Shrinkagerate (%)â?¤ 0.1 0.1 0.2 0.1 0.1 Elongation(%) 500 480 450 450 400 How to use: 1.A and B must be mixed evenly into a clean plastic or metal container, The bottom and walls of the container must be scraped well to ensure that the silicone is mixed with the curing agent. 2.The pre-operation time of the mixed is 30-40 minutes at room temperature, and the product prototype is poured by vacuum defrosting.The product can be cured completely at room temperature of 3-4 hours and heated at 80-120�ºC for 30 minutes. 3. When pouring or brushing mold for medium or large products, it is recommended to pour or brush 2-3mm thick silica gel on the surface of the product to fully and completely contact with the prototype. Package: 10KG, 20KG, 200KG or according to customer requirements.
Silicon.