1. This Blow Type Specific Gravity Cleaning Machine is to produce proportion segregation phenomenon under stress of aerodynamic and vibration friction of graininess material. 2. By adjusting wind pressure, amplitude and other parameters, larger proportion material will sink down and move bottom to up under stress of vibration friction; smaller proportion material moves up to bottom. 3. This machine is to remove blighted seed, budding seed, damaged seed (by insect), rotten seed, deteriorated seed, moldy seed, non-viable seed, seed with black powder sick and light impurities from wheat, corn, paddy, sunflower seed, melon seed, legume, etc. 4. At the same time, there is an angle on the right of vibration surface; the stone can be separated.
1. This Blow Type Specific Gravity Cleaning Machine is to produce proportion segregation phenomenon under stress of aerodynamic and vibration friction of graininess material. 2. By adjusting wind pressure, amplitude and other parameters, larger proportion material will sink down and move bottom to up under stress of vibration friction; smaller proportion material moves up to bottom. 3. This machine is to remove blighted seed, budding seed, damaged seed (by insect), rotten seed, deteriorated seed, moldy seed, non-viable seed, seed with black powder sick and light impurities from wheat, corn, paddy, sunflower seed, melon seed, legume, etc. 4. At the same time, there is an angle on the right of vibration surface; the stone can be separated.
ore CCD color sorter is a perfect match for ore color sorting and separation in processing factories. The machine was equipped with a high technology software program. The software adopts unique algorithm, a fast calculation speed,high output, part of the aircraft production has exceeded 40 tons/hour. 4 to 5 times that of similar domestic manufacturers
mineral ore separating machine could separate ores by color difference in plants. Mingder brand color sorters could greatly avoid waste of resources during customers break raw materials repeatedly to get available to use normal color sorters
Garnet separation machine, according to the color difference of the customer requirements of product yield, defect impurity and screening, the inferior is eliminated and impurities and other foreign bodies, intelligent mode of production, fast separation speed and perfect separation efficiency is satisfied with your choice.
Due to the low cost of plastics, the use value in life is very high. Common plastics are PP, PET/PVC, PC/PMM, ABS, etc. Due to the low cost of plastic products, which are used in all aspects of life, plastic products bring convenience to our lives. At the same time, waste plastics also cause great harm to our living environment. How to achieve the classification treatment, so as to achieve the maximum degree of recycling of waste plastics, DoingGroup of mixed waste plastic separation equipment is suitable for all kinds of density flotation method is difficult to sort hybrid plastic. Mixed plastic sorting equipment features: 1. The accuracy (purity) of crushing particles can be more than 95%, and the secondary sorting can be close to 100%. 2. The mixture of special different components must first test its charge ability and the polarity of the plastic in different spaces due to friction, or add the appropriate active agent to increase its surface electrification, in order to better sort out different plastic. DoingGroup's hybrid plastic separation equipment model is DY-MP-1, the processing capacity per hour up to 800-1200kg, power is 30Kw, size is 2.23*1.21*3.25m, weight is 2.7T.
HR-SD100 is an endeavor in reverting and recycling the oxides which occur during working of a Wave Soldering Machine in order to reduce production cost, create a greener environment and assist the quality process. Use special stirring system to melt the tin residues in the tin container and separate tin and ash in the separation container by the high speed of screw rotation. 1.Characteristic: 1.Highly effective recycling of the solder waste, up to 90% yield . 2.No need to add any chemicals or reducers to the process uses physical separation to ensure a good quality product. 3.Button controls, digital temperature control sheet, accurate temperature control. 4.All-stainless steel tank, clean convenience. 5.316 grade stainless mixing bowl with an 10kg capacity with heating power for complete mixing. 6.Dross automatic feeding system, automatic feed screw. 7.Electronic liquid level alarm, manually put tin. 8.Automatic separation of tin and tin ash, into the tin and tin-ash collection device. 9.Small size, light weight, move convenience. 10.Independent smoke filtration system (Optional). 2.Technical parameters Mixing motor 1Ï? 220V 90W Mixing Heating Power 1.6KW Mixing Capacity of Bottom Tin 10KG Temperature Scope 0-350 Heating-up time 50MIN Feeding time Continuous3-4kg/15min Dimension Electrical box size L500*W250*H650 L140*W330*H390 Totol Power Consumption 1.8KW Normal running power 0.4KW Power 1Ï?220V 50Hz Net Weight Appro*45kg
Screw Press Screw press is designed for dewatering of film plastics, organic fraction of and refuse derived fuel from municipal solid waste,restaurant waste and digestate from high solid anaerobic digestor, etc. In general, the screw press separates a liquid or pasty phase from a well-structured coarse solid.
-180C Professional Freezing Separating Machine Refrigerated Fridge for Mobile Phone LCD Touch Curved Screen Disassemble Repair Function : The newest frozen separation technology, More efficient and safe, not hurt LCD; Suitable for all touch screen smart phones in the market, (including for Samsung S6 S7 Edge S8 series;) Three models, to meet the different scale of the repair shop, different sizes of mobile phones, iPad; Ultra low temperature technology, does not require liquid nitrogen. The minimum temperature can reach -180 degrees Ultra thick sealing insulation material to keep constant temperature and rapid cooling without waste power. Universal sliding wheels is convenient for transportation and adjust the height difference. Safety circuit system, over heat protection, short circuit protection, over current protection 12 months warranty, online technical support and training is provided. Is a necessary machine for repairing the Samsung curved surface screen
Automatic Back Cover Separator Machine Cell Phone Real Cover Separator for 8/8 Plus/X/XS/XR/XS Max 220V EU 110V US Plug Rear Glass Removing Features: Compact yet practical. Used to separate the rear glass from screen bracket for 8/8 Plus/X/XS/XR/XS Max without using with Air Compressor or Vacuum Pump. Just heating and no need to change the mould. Power: 600W Including: 1 Separator Machine, 1 Power Cable Note: To remove the phone back cover glass, the temperature should be set in the 240-300 range.It takes about 15 minutes to heat up to 240 degrees.
LCD screen preheating separating machine for mobile phone tablet repair. LCD separator thermostatic temperature controller for screen opening replacing repair. New LCD screen Dismantling Treasure Heating Silicone Pad Adjustable Heating Platform. Parameters: Voltage: 110V/60Hz-220V/50Hz (with voltage switcher). Power: 350W. Product size: 350 210 55mm. Packing size: 380 225 75mm. Product net weight: 1.0 kg. Package gross weight: 2.0 kg. Features: 1. LCD separating machine for tablet screen, for Smartphone screens 2. Easy to use 3. Extremely rapid warming 4. Voltage switcher for 220V/50Hz and 110V/60Hz 5. Components place grid. 6. USB charging output. 7. High temperature resistance heating pad bending. 8. Screwdriver and batch nozzle bracket, hole position for screws.
Trommel Screen Trommel screen (Drum screen) separates the waste stream effectively into different grit sizes and with this achieves a homogeneous mix of different wastes. The screening drums are available in various sizes with different-sized perforations, depending on the required throughput, material composition, application and purpose of screening. The screening drum materials are available in carbon steel or stainless steel depending on the application.
TBK 988N 7 Inch Built-in Double Vacuum Pumps Flat Screen LCD Separating Machine For iPhone 8G 7Plus OCA Display Repair TBK-988N Flat Phone Screen Separator Curved Screen Glue Remover for edge Glue Clean Holder heater plate spiral rotate stage Feature: 1. Built in vacuum pump OCA lcd separator 2. 7 inch LCD separation table, which can support 99% of the mobile phones lcd repair on the market ; 3. For flat screen lcd separating ; 4. Easy to separate the screen 5. The heating table can set the temperature by yourself,and the separation effect is good.
M-Triangel CP-150 14inch Vacuum LCD Screen Separator Machine for LCD screen repair. Built in Vacuum Pump 14 inch Phone LCD Screen Separator Machine for iPad Tablet Touch Screen Separating Machine. Available for 110V and 220V. Features: 1.Manual LCD remove was applied to separate the broken Touch Screen Glass. 2.It is easy operated, using time Accurate Temperature Control. Voltage: 110V or 220V Power: 500W Package size: 450*350*230mm Machine size: 450*350*230mm Operation: 1.Put your LCD with touch screen on the metal plate, LCD side above; 2.Set the 4 arms to keep the touch screen on the metal plate stably; 3.Turn on the machine and wait for the metal plate become 80-100 degree (can not beyond 100 degree); 4.Start to separate the LCD off the glass with a core, then right and left movement with the core in between the LCD and the glass, please notice you must using gentle power and keep the core stay on the LCD surface, so that it will avoid the touch screen be damaged.
This big capacity industrial copper wire separator machine BS-F1000 is used to separate and recycle copper from scrap cable wires, the processing capacity is about 1.5T per hour. BS-F1000 copper wire separator is an automatic copper recycling machine, and you only need to feed your wires into the machine, the copper cable separator can automatically separate copper and plastic from cable wires. Is it convenient? Copper Wire Separator Machine Working Process: 1: First, a dual shaft shredder machine can cut wires into small pieces; 2: Second, the main crusher crush wires into a copper-plastic mixture; 3: Third, an air separator and vibrating tables separate copper from plastic skin; 4: In the end, you can get pure copper rice and pure plastic granules that can help you make money; Machine Model: BS-F1000 copper cable recycling machine Processing Capacity: 1.2T/H Motor Power: 76KW Machine Size: 7200*7500*2200MM Machine Weight: 6000KG Do you like this large-capacity copper wire separator machine? Welcome to know more:
If any new inquiry of Filtration Equipment ,Mineral Processing EPC, Mining Machine, Hydrocyclone, Heavy Medium Cyclone, High Frequency Linear vibrating Screen , We have been a professional mineral processing equipment manufacturer in China for almost 30 years. We are very glad to help you. 1.what the material that you deal with?(iron,copper,chorm ore,or other) 2.what the overflow and underflow do you want? and what the machine use which process or stage? 3.and whats your capacity required and your solid concentration
7 12 14 inch LCD Separator with Build-In Vaccum Pump Touch Screen Separating Machine for iPhone / Samsung Touch Screen Repair Option Type Size : Optional 1: KS-948C - Max 7 inches phone-500W Optional 2: KS-988C - Max 12 inches tablet - 270W Optional 3: KS-999C - Max 14 inches tablet - 500W Function : The separate machine is suitable for 7 inches cell phones or 12 inches table / iPad The machine is used for separating LCD and touch screen of Apple, Samsung, HTC, Huawei, LG,Xiaomi Oneplus as well as other Smart Phones. If the LCD is still working well, you just need to replace the touch screen. Operation : Put your LCD with touch screen on the metal plate, LCD side above; Set the 4 arms to keep the touch screen on the metal plate stably; Turn on the machine and wait for the metal plate become 80-100 degree(can not beyond 100 degree); Start to separate the LCD off the glass with a core, then right and left movement with the core in between the LCD and the glass, please notice you must using gentle power and keep the core stay on the LCD surface, so that it will avoid the touch screen be damaged. Features : Built-in Pump no need screen clamp Advanced TEP controller. It can show both the setting temperature and actual temperature at same time. Heat area: 196x120 mm. Perfect for all 7 inch screen, 280x200 mm. Perfect for all 12 inch screen. Specification : Input voltage: 220V Applicable size: 7 inches or below / 12 inches or below Temperature adjustment: 50 to 150 degrees
Many New popular mobile phones on the market both the front and back cover are glass,the back glass is fragile and extremely difficult to repair.and We launched a new machine,It can separate midframe/bezel/back glass of more than 50 smartphone models, including iPhone X/8 Plus/8 in a safe and quick way.
Our company has accumulate nearly ten years marketing experience.The engineers could deeply know the demand of clients ,enviroment and the safety,So the most advanced technology could be integarated into the product. Tin residue is the main thing that our device facing .After the equipment processing,the dross will be refined ,and the recycled tin could be reused.This Intelligent and efficient model could be used under off-line situation ,and no worker is needed.During the working,the only thing you need to do is putting dross into the machine without any chemical .When the temperature reach 280 degree,the tin qualified for using would be purifed.By using our machine,a large mount of tin could be saved and the mount of the cost will reduce. Electronic System: 1.HITECH GUI interface:WEINTEK TAI WAN 5.7" touch creen 2.Built-in time control system: time pre-setting, automaticturn on/off 3.PID function heating mold with zero touch Dross loading system: In-phase screw scraps dross and drive it into mixing aera which equped with dross powder container of 30kg capacity. Mixing System: 1.100kg capacity with outside heating mold melting system. It maks tin warm up evenly and rapidly, save energy. 2.400W 380V 3P mixing motor uses worm wheel structure to avoid motor directly connect with high temperature part. 3.Special designed mixing structure makes dross evenly melted. 4.Temperature couple check liquid dross temperature and feedback acurately. Pure Tin Molding System: 1.When pure tin reaches to 30kg, the machine automaticly discharge the tin out to the container. 2.Molding slot: 1.3kg/slot, 16pcs slots 3.Automatic output device: in-phase with discharge sysyem to collect and output the pure solder. Inner force cooling system makes solder bar cool down in short time. Fog purify system: Water filtering + activated carbon filter cotton, filtering the smoke particles and peculiar smell gas. Body Parameters: Streamline appearance with 3D design, green arc glass to see the operation and easy maintenance. Power Supply:3P 380V /AC Size:L1800mm*W1050mm*H1600mm; Weight 500KG Power:5.8KW Working Power 1.8KW
HR-5000B Multi-Blade PCB Cutting Machine 1.This machine can cut many pieces of singles board for one time. 2.The shaft of upper blade is adjustable from 0mm to 5mm. 3.The distance between blade is adjustable, suitable to cut pcb with width from 15mm to 20mm. 4. The blade is made of Switzerland , using high speed steel, durable with long service life. 5.The cutting speed is controlled by the rotary knob. 6.No limits to the cutting length. 7. Cutting thickness is from 0.5mm to3.2mm. 8. The transfer belt can take the separated boards out, so the machine can dock the assembly line. 9. This machine is suitable for pcb control panel, fr4, aluminum base board, etc(longer than 400mm) and special board. 10. With multi-blade and easy operation, this machine fits mass production. Features: Model number: (HR-5000B) PCB Cutting Machine Dimension : 1100*1050*500mm Cutting length : No limit Cutting width : 60-200mm Cutting thickness : 0.5-3.2mm Voltage : AC230 V/110V Weight 425KG
