Flexible fireproof cables are composed of copper stranded wires, mineral compound insulation, and mineral compound sheaths. This kind of cable has non-combustible, smoke-free, non-toxic and fire-resistant characteristics. The structure of the flexible mineral insulated cable adopts a flexible structure and materials that are made of mineral compounds, which make up for the defects of hard structure, flammability, and toxicity. It also has some advantages that other cables cannot have, such as: fire resistance, large current carrying capacity, Impact voltage resistance, mechanical damage resistance, halogen-free, non-toxic, explosion-proof, waterproof, corrosion resistance, long life, safety, overload resistance, high temperature resistance, low cost, etc. Flexible fireproof cables have an important role in protecting lives, materials, and information security. They are used in trunk lines, fire lines, escape rescue systems, such as emergency lighting, fire monitoring, alarm systems, elevator systems, smoke exhaust systems, and control lines, etc. Flexible fireproof fireproof cables used in trunk lines, fire lines, escape and rescue systems, such as emergency lighting, fire monitoring, alarm system, elevator system, smoke exhaust system, and control lines, etc. Flexible fireproof fireproof cables used in Public buildings: high-rise buildings, underground buildings, hotels and restaurants, hospitals, schools, business centers, government affairs centers, department stores, large supermarkets, logistics warehouses, financial institutions such as banks, securities and insurance, post and telecommunications centers, power control rooms, substation rooms, museums, memorials and other historic buildings. Flexible fireproof fireproof cables used in Infrastructure: airport terminals, stations, hub centers, ports, subway systems, Bridges, tunnels. Flexible fireproof fireproof cables used in Industry: coal mining, coal chemical industry, oil field mining, petrochemical industry, oil refinery, metallurgical industry, iron and steel industry, shipbuilding industry, aerospace, electric power industry, pharmaceutical industry, glass industry, paper industry, military system. Flexible fireproof fireproof cables used in Fire prevention, explosion prevention, high temperature places: oil depot and gas station, natural gas transmission and compression station, garden landscape, historic sites, wood structure buildings
Sd13 smoke alarm key features: * worry-free! 10-year sealed-in lithium battery * advanced photoelectric sensing technology offers high sensitivity * auto-check malfunction * low battery warning * manual test & auto-reset * dustproof, mothproof & anti-visible light * anti-rfi (20v/m-1ghz) Sd13 smoke alarm specifications: * sensor type: photoelectric * alarm sound: >85db (3m) * power supply: dc 3v lithium battery (included) * power supply life: 10 years * alarm current:
Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector Smoke Detector. Wireless smart photoelectric smoke sensor, with Ultra-low-power MCU design. It is capable of real-time detecting the Presence of smoke. Once detect danger of fire smoke, red LED will be ON, and alarming to alert you and your family timely. Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector. the whole solution is just smoke detector alarm to app Platform directly, can be real-time monitoring remotely. this solution Can save much cost from main alarm panels, and it also can be linkage to Other smart device to work together. It will be easy to match different Project applications, such as building office, warehouse, supermarket, Factory, restaurant, hotel Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector is a smart Photoelectric smoke sensor, with ultra-low-power MCU design. It is Capable of real-time detecting the presence of smoke. Once detect danger of fire smoke, red LED will be ON, and alarming to alert you and your family timely. It can be widely used in household, lounge, Coffee house, dancing hall, and any other places need fire alarm Monitoring. this Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector can work Standalone. When detects smoke, alarm will sound and send push message for alert. Meanwhile, it can link with other smart products on Tuya Platform. Keep your house safe. Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector Function: 1. APP remote control 2. Link with TUYA smart home products together 3. Maze technology and small size 4. 80dB sound alarm alert 5. Ultra low power Skype: iotech(at)foxmail.com Whatsapp: 0086-137-2827-9456 Wechat: 13728279456 Web: Enerna-IoTech.com Package: 1x Enerna IoTech WiFi Smart IoT Wireless Smoke Fire Alarm Detector 1x User Manual
Smoke & co detectorHeat detector ntc thermal sensor tamper resistant pins for battery4 digits temperature led display shockproof design, suitable for vehicle usecan set maximum or minimum alarm temperature simultaneously test and hush button, auto resetreal ambient temperature correctable on-top battery compartment, easy for battery replacementauto reset /power off reset optional Execute criterion: en54-4, ul539, en14604, ul217 dustproof, mothproof and anti-white light ElectrovalveManipulator gas species: natural gas, lpg, man-made coal gas and other noncorrosive gaspower supply: 8vdc-16vdc 12vdc-26vdc valve body material: brass alloyoperation press: 1.6mpa material for sealing: nbr rubbervalve specification: 4 fen (1fen=1/3centimeter), 6fen, 1 inch, 1.25 inch, 1.5 inch test operating pressure: 25kpa torque: 10kg.Cm~30kg.Cm~40kg.Cm~50kg.Cm11069.540mm Anti-electromagnetic interference, no-spark design Alarm bellBreak glass manual call point size: 2", 3", 4", 6", 8", 9", 10", 12"rated voltage :12vdc or 24vdc / 220vac optional volume: over 105db/mconsumption: 10w working voltage : 12vdc/24vdc With waterproof cover manual call pointSiren with strobe
Battery powered photoelectric radio smoke alarm
Sc05e smoke and co alarm key features: * smoke & carbon monoxide dual detection * advanced photoelectric sensor, mcu auto-processing technology * strong anti-interference ability * distinctive smoke & co alarm sounds * low battery warning * auto-check malfunction in smoke chamber * test/silent button * dustproof, mothproof, shockproof & anti-visible light Sc05e smoke and co alarm specifications: * sensor type: photoelectric * alarm sound: >85db (3m) * power supply: dc 3v lithium battery (included) * power supply life: 5 years * alarm current:
Snd-500 dc smoke alarms provide battery powered smoke detection and alarm functions within a single unit. Advanced electronics in conjunction with a photoelectric smoke sensing chamber provide early detection of fire And high immunity against unwanted alarms. Snd-500 dc smoke alarms are battery powered, do not require a mains supply, and are suitable for general Residential applications. Photoelectric smoke sensor Integrated indicator provides visual indication of an alarm condition Test button verifies battery and alarm operation Loud 85 db sounder to alert occupants Single dc 9 v user-replaceable battery provides up to 18 months operation under normal conditions 30 day low battery warning signal Interconnection function available to connect up to 38 units together Battery missing indicator
The Honeywell XS100-EN Optical Smoke Alarm has been engineered for reliability and ultimate performance. Complete with a 10 Year lifespan and warranty, a low profile design, tamper proof battery & easy installation they are ideal for any residential property. Offering accurate and rapid detection of fires the XS100-EN using the latest optical sensor technology to ensure reduced false alarms. With an automatic self check feature and dirt compensation Honeywell have designed this alarm with reliability and ease of use in mind. It's brilliant Test with reduced level sound function allows you to complete your weekly tests of the alarm without a full 85 Db alarm going off each time. Optional Wireless Interconnection Using the XW100 Plug in Module any X-Series alarm (including the XS100-EN) can be wireless interconnected to any other X-Series alarm (whether that be Smoke, Heat or Carbon Monoxide) allowing you to create a system (maximum of 32 devices) for your home. A separate wireless module is required for each alarm in the system to interlink. Quantity in Stock : 1000 Pcs
Model No SR-820PHW-AC Operating voltage AC110/220V(9V backup battery) Interconnection Install within the radius of 200 m Hush function YES Code form 2262 Sending frequency 433MHz Radio distance 200 m(open area) Sensitivity 2.06%ft±1.3%ft Sound level 85dB/3m Installation Wall or Ceiling mounted Working environment -10~+50(â?¤95%RH No congelation) Dimension 128*38mm
Model No. SR-812PC-4 Operating voltage DC9~35V Alarm temperature N/A Static current 13mA(NC);4mA(NO) Alarm current 9mA(NC);19mA(NO) Alarm output Relay output Installation Ceiling mounted Sensitivity 2.06%ft±1.3%ft Working environment -10~+50(â?¤95%RH No congelation) Dimension 100*
Operating voltage DC9~35V Alarm temperature 57 Static current 20uA Alarm current 35mA@DC12V;83m@DC24V Alarm output Remote LED indicator Installation Ceiling mounted Sensitivity 0.15dB/m(±0.03dB/M) Working environment -10~+50(â?¤95%RH No congelation) Dimension 100*46mm
SNC-300 non-addressable photoelectric smoke detectors are state-of-the-art detectors suitable for connection to 2-wire or 4-wire non-addressable fire detection control and indicating equipment, or to addressable fire detection Control and indicating equipment that can accept non-addressable type detectors. Advanced electronics in conjunction with a photoelectric smoke sensing chamber provide early detection of fire And high immunity against unwanted alarms. Photoelectric smoke sensor Analogue detection discrimination Dual leds for 360° visibility 2-wire and 4-wire models for dc 12 v and dc 24 v operation 4-wire model for dc 48 v operation 4-wire models available with a n/o alarm relay output 4-wire models available with auto-reset 2-wire models available with remote led output Connects to zone monitor for use with addressable control and indicating equipment
Snc-300 non-addressable photoelectric smoke/heat detectors are state-of-the-art detectors suitable for connection To 2-wire or 4-wire non-addressable fire detection control and indicating equipment, or to addressable fire detection Control and indicating equipment that can accept non-addressable type detectors. Advanced electronics in conjunction with a photoelectric smoke sensing chamber and an electronic thermistor Provide early detection of fire and high immunity against unwanted alarms. The heat sensor provides sensitive Rate-of-rise operation or fixed-temperature operation when the response threshold value is exceeded. Photoelectric smoke and heat sensors Analogue detection discrimination Dual leds for 360° visibility 2-wire and 4-wire models for dc 12 v and dc 24 v operation 4-wire model for dc 48 v operation 4-wire models available with a n/o alarm relay output 4-wire models available with auto-reset 2-wire models available with remote led output Connects to zone monitor for use with addressable control and indicating equipment
The GSM Alarm System S110 with multi-functions. It integrated GSM Module inside, and almost all useful functions and features of the alarm systems in the worldwide markets. Also it with innovative and experienced functions and features to meet the required and potential demands. The GSM Alarm System S110 is a new security protection solution. It is special for home, house and office and other applications. It based on Wireless GSM Communication network; it can alert you by SMS and calling. The GSM Alarm System S110 supports two way voice communication and wiretap by intelligent technology. It can answer the incoming call as well as dial out to the others. It is very useful for user to create voice communication or listen in the houses. The GSM Alarm System S110 supports Watchdog, once the sensor in this zone triggered in the preset time, will not alarm, if the sensor hasn’t been triggered in the preset time, will alarm. It is useful for monitoring elders, children, and the person on-duty. The GSM Alarm System S110 equips with two output relay, one is link-output relay, special for switch on or off appliance while the system alarm, another is independent output relay, it can be switched on or off by SMS commands.. The GSM Alarm System S110 equips with LCD display entire operation menu, all operations and settings are visual and intuitive! The GSM Alarm System S110 supports GSM Jammer interference! The GSM Alarm System S110 with user friendly design idea, all operations and settings are visual and intuitive! What you need is a SIMCard which supports Call ID function. What advantages of the S110? 1. Two-way Voice communication or wiretap are available; 2. LCD displays the entire setup menu; 3. Armed, Partial Armed(At House or Stay), Disarmed, SOS are available; 4. Armed delay, alarm delay, siren work or not, more other functions are Programmable by user; 5. Watchdog,24Hours Zone, SOS zone are available; 6. Using ICON to display armed, Partial Armed, Disarmed, Power status, Siren status and GSM Signal status. 7. Auto-detect and report, GSM Signal Jammer alarm, SMS Switch is available. Functions & Features of the GSM Alarm System: Ø GSM Frequency: Dual-Band(900/1800MHz), Quad-Band is optional(850/900/1800/1900Mhz) ; Ø Supports armed, Partial armed(At House or Stay) or disarmed, SOS by remote control or mainframe keyboard; Ø Supports armed, disarmed, inquiry mainframe status, switch on or off relay output by SMS Commands; Ø Automatically send SMS Alert and dial to the pre-set cell phone when any sensor had been triggered; Ø Equips with 8 Wired zones, the attribute (Normal/At House or Stay mode) and Zone Name is editable, NC NO EOL is programmable; Ø Equips with 16 Wireless Zones, zone attribute (Normal/At House or Stay mode) and Zone Name is editable; Ø 3 X 24-Hour zones for smoke and gas leakage sensor,1XWatchdog zone for monitoring elder or child, 1XSOS zone for emergency help; Ø Supports 3 SMS Alert Numbers and 5 Calling alert numbers and 20 Alarm Records for owner review; Ø Supports Timer for automatically arm or disarm the system; Ø Supports armed delay to give enough time to you go out the home, the delay time is editable by user; Ø Equips with 1 Alarm-Link output relay, once the system triggered, the output will switch on for 4minutes; Ø Equips with 1 independent output relay, it can be switch on or off by SMS Commands. This is very useful for remote switch on light or off while you’re in another city in the night; Ø The Keypad can use as a dialer, the functions like the Cell phone; Ø The external power failure & recovery alert function is optional ; Ø Supports wiretap through the internal microphone; Ø Supports internal Speaker to special user for two-way voice communication; Ø It is Compatible with PT2262/2264 and PT2242 wireless IC; Ø Standby internal rechargeable battery which can last 12 hours; Ø Based on the GSM communication network and Operation Menu Display technology, apply to wide range situations. Ø More programmable functions and features are available. Mainframe X1 Remote control X2 Wireless PIR Motion Sensor X1 Wireless Door magnetic Sensor X1 Wired Siren X1 GSM Antenna X1 AC/DC AdaptorX1. User Manual Optional Accessories (Wireless): Combined Light and Siren PIR Motion Sensor Glass Break Sensor Magnetic Window Sensor Magnetic Steel Scrolling Door Sensor Infrared Photoelectric Beam Fence Wireless Strobe Siren Our Other Wireless Sensors
HS-DG812 Battery Powered Photoelectric Smoke Alarm with excellent stability and high-sensitivity. Our standard battery is 6F22, lithium battery is optional. Key Specifications/Special Features Power Source: 9V Battery (included). Audio Alarm: 85dB/3m Temperature Range: 0 to 40 Humidity Range: 5%-95% relative humidity(RH) Sensor: Photoelectric Size: diameter 106mm in diameter x32mm depth Interconnects: No Easy to install with mounting base included Suitable for any room Low battery signal Test button for simple testing
"Instant Test Button,Dual sensor,Low battery warning Operating voltage: 9V battery Fixed Temperature alarm:57 Alarm indication: red LED flash Sound level: â?¥85dB/m Smoke Alarm Point:2.06%/ft Detecting area: 20 square meters Alarm output: sound and flash alarm "
"Test Button; Hush button Auto reset ASIC adopted;Anti-light, mothproof;Strong adaptability for circumstance; SMT design, high stability Technical specification: Operating voltage: 9V battery Alarm output: sound and flash alarm Sound level: 85dB/3 meters Sensitivity:2.06%/ft Detecting area: 20 square meters Dimension: 128*38mm Execute criterion:EN14604,UL217"
Main Feature: reset after power disconnection infrared photoelectric sensor network output / LED indicator stainless steel shield for anti-EMI SMT adopted Strong adaptability to circumstance Dustproof, mothproof, anti-white light Technology parameter: Operating voltage: DC12V Standby current: 2mA Alarm current: 10mA Operating temp.: -10-50 Working humidity: 95%RH Alarm mode: network output / LED indicator Detecting area: 20 square meter Sensitivity: class I Alarm output: relay output (N.C.)
Smoke alarm Specifications: Power source: 1.DC9V 2.AC220V (No Batteries Require) 3.DC9V&AC220V Working current: Surveillant current
"Test Button; Hush button Auto reset ASIC adopted;Anti-light, mothproof;Strong adaptability for circumstance; SMT design, high stability Technical specification: Operating voltage: 9V battery Alarm output: sound and flash alarm Sound level: 85dB/3 meters Sensitivity:2.06%/ft Detecting area: 20 square meters Dimension: 128*38mm Execute criterion:EN14604,UL217"
