It adopts Germany imported automatic plasma surfacing machine for alloy surfacing welding.
The thickness of the alloy is more than 1.5mm, the hardness is HRC50~56, the welding strength is high, the structure is compact, and the screw wear resistance, high temperature resistance and corrosion resistance can be improved.
Basic parameters: Screw alloy hardness (HRC): 48-58 Wear resistance: good Corrosion resistance: poor Scope of application: Applicable resin with 15% glass fiber below the plastic Add glass fiber 15% or less PC, PMMA, PP, PP fireproof, PS, AS, ABS, PVC, PET, PO, POM, AS, TPU, TPR, TPE, PC+ABS
Alloy barrel
nickel base alloy Wear and corrosion resistant
Basic parameters:
Hardness (HRC): 55-60 Wear resistance: excellent Corrosion resistance: excellent Temperature range (°C): �450
Scope of application: Production of viscous, wear-resistant and corrosion-resistant resin General general resin and engineering resin contain 50% glass fiber, PE, PP, ABS, AS, PS, TPE, PC, PEI, PEEK, PPS, PAR Special engineering resin, PA, PBT, LCP containing less than 45% of glass fiber.
Ingredients and processes: Alloy composition: Ni+Cr+W+B
1. The application of the equipment:
For the production of plastic extrusion. : the material of pvc, ldpe, xlpe, lshf, tpu ext.
2. Technical parameters
1) production scope: the diameter of the conductor: 1-10mm
Finished diameter size: 2.5-13mm
2) extrusion capacity: max 80kg/hr
3) motor power: 15kw(frequency conversion)
4) heating power: 16kw(three section heating with air cooler)
5) center height of the machine: 1000 mm
6) pay-off spool specification: diameter 630mm(pn 400-630mm)
7) take-up spool specification: diameter 630mm(double spool)
We offer continuous extrusion machines from 144 kg/hr output upto 2800kg/hr output. We also offer continuous extrusion line for aluminium wire 140-220kg/hr output with product cross section of 10-100sqmm.
We also additionally offer continuous extrusion machines machines aluminium tube ,wire, bus bar and also for copper alloy like CuAg,CuSn,CuMg.
11041 Screw Barrel For Injection And Extrusion Machine Suppliers
Short on time? Let Screw Barrel For Injection And Extrusion Machine sellers contact you.
The circle thread made from the machine are applicable for the manufacturing of ropes/cables, fishing nets, construction safety nets sun shielding nets, artificial hari, mosquito nets, brushes, as well as protective nets for the cotton fields.
The machine is compacted in its structure. ADC motor is used for stretching, thus a synchronous speed regulation and a single speed regulation can be achieved to meet the different parameters.
The spinnerets are produced by the most advanced way, so that the flatness and uniformity of the thread can ensured.
Installing Dimensions 17000¡Á1300¡Á1450 mm 21000¡Á1450¡Á1450 mm 23000¡Á1550¡Á1450 mm.
Scraper is a parts of continuous extrusion machine to make busbar.
We are a manufacturer of production line of copper busbar and spare parts of continuous extrusion machine.
The spare parts of extrusion machine are including extrusion wheel, chamber, chamber lid, coining roller, scraper, dies, abutments (nose), side wheel, drawing dies and so on for conform extrusion machine.
Aluminum Tubes Line
LJ60 Horizontal Elbow Squeezer or horizontal extrusion press is a specialized equipment which extrudes the aluminum slug into germ tubes, cylindrical objects and other shapes.
Main technical parameters:
A. Tube diameter range: 11mm-22mm
B. Tube length range:
The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.
The features of this technology:
1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar;
2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding;
3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines;
YJ650 stamping equipment
4.No flammable gases, not affected by rainy or cold weather;
5.Relieve congestion of the connecting point, facilitated concrete pouring;
6.No professional and experienced worker needed, able to connect changed steel bar of different diameters;
7.Save 80% of connector steel consumption.
The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry."
The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.
The features of this technology:
1.Strong intensity connector, stable and reliable; no specific requirements on the weld ability of the rebar;
2.Only needs 1-3m to stamp each connector, which is about ten times faster than ordinary welding;
3.Only 1-3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines;
YJ650 stamping equipment
4.No flammable gases, not affected by rainy or cold weather;
5.Relieve congestion of the connecting point, facilitated concrete pouring;
6.No professional and experienced worker needed, able to connect changed steel bar of different diameters;
7.Save 80% of connector steel consumption.
The technology is assessed by the Ministry of Construction as "world advanced, high quality, high efficiency, safe, and economical thick diameter distorted steel bar connection technology which can be widely used in the construction industry."
Plastic Teflon PTFE Rod Extruder Machine For PTFE Rod( 4-20mm)
This PTFE extruder is able to extrude rod which dia from 4mm to 20mm. The automatic
production line is controlled by computer, which is really easy to operate. Meanwhile,
the plastic extrusion machine is advance designed, high output, low energy consumption,
long-life, and also our professional engineer is available to offer overseas after sale service.
We can solve various problems to improve the equipment efficiency for you.
Ram extrusion machine for Teflon rod
The China vertical RAM Extruder Machine is designed with 2 pressure plates, so the ream is affected
via a slid pressure plate. The China rod ram extruder is equipped with two hydraulic cylinders.
The main cylinder serves to move the ram; the additional cylinder serves for retracting the
mandrel. Base plate and dosing tray are water-cooled.
The PTFE powder is feed into the rotating hopper via an exact working powder dosing device,
controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into
the cavity of the mould.Range of diameter PTFE Extrusion 4 to 20 mm, Heating zones 4-6
zones.The complete electrical control is laterally fastened at rod ram extrusion. With a PC
touch screen panel all speeds and temperatures can be programmed. Electronics contain
the necessary automatic controllers for speeds and temperatures. Five temperature regulators
are contained in the plant, four for the extruding pipe and one automatic controller for a mandrel
heating element. The maximum output speed of PTFE extrusion depends on: physical property ,
like Specific Gravity and Elongation, outside of PTFE rod diameters and PTFE product heating
length.PTFE Equipment Warranty: according to our standard terms: 12months
Technical Specification:
PTFE Rod Extruder Dia 4mm-20mm
Technical Data
Description Model No. Machine model PFLB-20
Plastic Extruder PTFE
Power 12 kw
Min - Max Dia 4-20 mm
Tolerance 0-0.2mm+
Length Unlimited
Production Per Hour 7-14kg
Electricity Consumption Per hour 2 kw
Weight of the Machine 930 kg
High of the Machine 2150 mm
Floor area of the Machine 3.5 M2
Warrenty for Parts 1 Year
Machine Gurantee Period 1 Year
Free Spares 1 s
Deliver LT 30 Days
Features
1, Automatic control
2, Easy to operate
3, Low power consumption
4, Product size stability
5, Precise sintering
6, Environment-friendly and Energy-saving
Application:
PTFE RAM Screw Extruder products rod, and it has the best chemical corrosion resistance and the dielectric properties, not aging, not sticky, it also has the lowest friction coefficient. So the rod has a wide range of applications
Depth of nitrated layer: 0.5-0.8mm
Hardness of nitration: 900-1020hv
Fragility of nitration: less than grade 1
Surface roughness: ra 0.4um
Surface hardness of nitrated cr coating layer:í²950hv
Hardness of bimetallic layer: hrc55íp-72íp
Thickness of cr-coating layer: 0.03-0.08mm
Depth of bimetallic layer:ú+2mm
Specifications of screw:
ª)20-ª)250 l/d 15-50 we offer various types of extruder screws and adjust to different compression ratio, which can fulfill customer's requirement perfectly.
Specification:
Screw diameter: d15- d 300
L/d ratio: 15-46
Product classification:
Aiming at different plastic products the screw can be chosen from: general type, pin type, barrier type, separation type, and gas-exhausting type, etc.
Adopting extrusion technology by leader machinery, and the final products of this line, which can endure pressure 0.4-2.5mpa, are mainly used for the indoor water supply. Using heat-melting weld means for fittings, antisepsis and anticorrosive, so this kind of pipe is the new environment- protection water supplying products.
Adopting extrusion technology by leader machinery, and the final products of this line, which can endure pressure 0.4-2.5mpa, are mainly used for the indoor water supply. Using heat-melting weld means for fittings, antisepsis and anticorrosive, so this kind of pipe is the new environment- protection water supplying products.
Main technical data:
Original : KUMHO ABS 181
Moisture : 20%+/-
Quantity� :� 100MT
It is powder type.
Customizable for customer needs with various processing techniques such as injection, extrusion, and hollow� molding.
11041 Screw Barrel For Injection And Extrusion Machine Suppliers
Short on time? Let Screw Barrel For Injection And Extrusion Machine sellers contact you.
