Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
BFA brown fused alumina for Refractory material/brown corundum Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Garnet sand, silica sand, quartz sand, gbfs, ggbfs, fly ash, stone aggregates, basalt, gabbro, talc, dolomite, micro silica, silica fume, manganese ore, manganese oxide, manganese dioxide, manganese sulphate, lime stone, gypsum, salt, bauxite, bentonite, kaolin ore, calcined china clay, washed kaolin, industrial salt, table salt, raw salt, washed salt, salt tablet, iodised salt, free flow salt, wood pellets, blast furnace slag, copper slag.Manufacturer, processor, packaging and trading
Brown Silica Sand
Brown fused alumina corundum is produced by a reduction fusion of high quality bauxites in electric arc furnaces. It is both a hard and tough material with high strength, making it an excellent abrasive grain for applications such as grinding wheels, sandpaper, blasting media, metal preparation, lapping, polishing, and grinding. Its thermal properties make it an excellent raw material for refractory applications.
Brown fused alumina is called industrial teeth, in addition to the application in refractories, can also be used in sandblasting, free grinding, resin abrasive, filter media, hydraulic cutting and so on. Brown fused alumina sand put bauxite as raw material, obtained by high temperature smelting, its basic mineral is a-Al2O3, the hardness of brown fused alumina sand is high, high melting point, thermal conductivity, high temperature volume stability, not easy to crack, acid resistance,alkali resistance , suitable for casting core surface sand, paint and investment casting system shell material, and can be used as plain carbon steel, alloy steel, hard bronze, cast iron pieces of coarse grinding and free abrasive. The price of brown fused alumina is lower than that of same level white corundum, it has a better cost performance. Brown fused alumina sand often is irregular prism reddish brown or brownish black particles, bulk density: 1.65g / cm, hardness 9.1. The composition of brown corundum are (%): Al2O3: 92-98.8%, SiO2: 1.3-%. Product specifications: 16 # 20 # 24 # 30 # 36 # 46 # 60 # 80 # 100 # 120 # 150 # 180 # 200 # 240 # 260 # 280 # 320 # 400 # 500 # 600 # 800 #. Packing: 25KG / woven belt. Qingyun corundum refractory companies can also produce according to customer requirements. brown fused alumina sand Brown fused alumina sand, brown fused alumina powder is with moderate hardness, high toughness, strong anti-crushing ability, high temperature resistance, oxidation resistance, corrosion resistance, low cost, strong applicability, high purity, good crystallization, strong liquidity, low linear expansion coefficient , Corrosion resistance and other characteristics. In the application process has not detonated, not powder, no cracking, widely used in abrasive abrasive, refractories, sandblasting, grinding and polishing, wear-resistant floor of silicon carbide, precision casting mold shell production. Brown fused alumina sand can be made of sandpaper, emery cloth, grinding wheel, grinding stone, refractory materials, casting, anti-skid sand.
Calcined Bauxite: Calcined Bauxite is obtained by calcining (heating) superior grade Bauxite at high temperature (from 850 oC to 1600 oC). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57 % to 58 % in raw Bauxite, Calcined Bauxite has an alumina content of 82 % to 86 %. The heating is carried out in rotary kilns. Calcination is done at different temperatures ranging from 850 oC to 1600 oC depending upon the customer’s application. We export Calcined Bauxite for various applications such as refractory bricks, abrasives, steel polishing, etc. We provide consistency in quality and availability of Calcined Bauxite at extremely competitive prices. Applications of Calcined Bauxite: Refractory Grade Calcined Bauxite (CB - I and CB - II Grade) : To make refractory grade, Bauxite is thermally treated at 1600 oC to produce Calcined Bauxite where the Alumina content is mostly above 82%. Brown Fused Alumina, Proppants and Road Surfacing : To make the above grades, Bauxite is thermally treated at 1000 oC - 1200 oC to produce Calcined Bauxite where the Alumina content is anywhere between 80-88% depending on the requirement. Minimum Order Quantity : 1 Containers
Raw Bauxite: Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries. About Raw Bauxite: The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC). About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same. Application & Uses of Bauxite: Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in : - Aluminium - Cement - Chemical - Blast Furnaces - Iron/Steel Ladles, etc. Advantages of Artha Bauxite: Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
Quartz sand, grits ,fused silica , felsite powder, kynaite grits and lumps, pebbles.
Fish Maw Dried Fish maw is the dried form of fish air bladder. Fish maw is one of the precious traditional Chinese ingredients rated along abalone, sea cucumber and sharkâ??s fin due to it's high nitritional content. Fish maw contains rich proteins and nutrients such as phosphor and calcium. It nourishes yin, replenishes kidney and boosts stamina. It is effective in healing weak lung and kidney, anemia, etc. It is suitable for consumption by any age group of either gender and is a kind of therapeutic food.
Quartz: Quartz is one of the most well-known minerals on the earth with numerous uses. Sand, which is composed of tiny Quartz pebbles, is the primary ingredient for the manufacture of glass. We feel pride in introducing ourselves as a leading Quartz Lumps Exporters from India. Mineral-grade packaging is provided for safe and easy delivery of Quartz Lumps. We welcome orders from Middle East, East Asian and several other countries and ensure timely shipment. Applications : It is used as an abrasive for sandblasting, grinding glass and cutting of soft stones. Quartz powder is also used in ceramic tiles along with feldspar.
Deals in activated carbon powder, granular activated carbon, sawdust, wood sawdust, biomass briquettes, white coal, iron ore, laterite, spices, raw salt, sea salt, common salt, refined salt, bleaching earth, mill scale, hms scrap, low ash metallurgical coke, marine gypsum, silica sand, silica flour, quartz, hematite powder, bentonite powder, china clay, quartz sand, fly ash, kaolin clay.Indonesian coal, South African coal, coke fines, ground granulated blast furnace slag ,coal based activated carbon, zinc ash, zinc dust, zinc, coal dust, earthing coal, coke breeze, talc powder, dolochar, gypsum powder, plaster of pairs, aggregate, marine gypsum, gypsum powder, pop & coke fines, chemical gypsum,saw dust ,washed marine gypsum, quartz powder excavator, ggbfs, granulated blast furnace slag, fly ash, iron mill scale, bleaching carbon.
Granulated Blast Furnace Slag
Ground Granulated Blast Furnace Slag
Ground Granulated Blast Furnace Slag
Quartz Grits Grade A & B Color: Milky & Glossy white and off white Available almost all sizes
Applications: Drilling Earthing Cattlitter Bleaching
Drilling
Water purification
Construction Industrial
