microwave data video link long range 10km on UAV zero delay Model: SG-TD110 Introduction of microwave data video link long range 10km on UAV zero delay SG-ZD100 H.264 TDD-COFDM transceiver is our latest Zero delay 1080P HD wireless communication system with advanced time-division multiplexing technology and COFDM modulation combined.It provides perfect bi-directional data transmission channels(AES 128bits encryption) and ultra-low latency (around 10ms) high-definition video transmission channel from end to end transmission. Good for achieving real-time, multi-path, high-speed mobile data, audio and video signals transmission. Features of 1080P HD wireless video data communication transceiver * Full HD video transmission, support1080P@60fps; * Support two way data transmission, and one way HD video audio transmission * Provide high-speed large data stream channel & adaptive dynamic allocation technique; * Support transparent PTP&PMD network technique; * Non-Line of Sight (NLOS) & high-speed mobile signals communication; * Standard RS-232/RS-485/RS422, RJ-45 Ethernet ,HDMI interfaces; * Support high standard and technical-grade application; * Small size, lightweight and easy to carry; * Aluminum outer-casing with good heat dissipation; * High definition OLED digital display panel,simple and concise operation; * Zero delay(around 10ms). Parameters of SG-TD110 transceiver: Power Supply: DC7V-17V Consumption: 9W Video in/out: HDMI, RJ45 Ethernet, support 1080P, 720P, 576, 480 Note: HDMI for transmitting end, RJ45 for receiving end Data in/out: Standard RS232/RS485/RS422 Frequency Output: 2405MHz-2479MHz, step in 1MHz (other frequencies can be customized) RF power output: 20dBm-30dBm (100mW-1000mW) (adjustable) Working bandwidth: 4MHz/8MHz Encryption: 128 bit AES manually setup, more safer Error correction mechanism: 32 bit of CRC, ARQ Modulation: TDD-COFDM, time division duplex mode Parameter Control: adjustable parameters through the OLED panel Working temperature: -20�??-75�?? Dimension: 85mm*28mm*51mm Weight: 151g
1.4ghz tdd-cofdm wireless networking transceiver Model: sg-td1400 Sg-td1400 is the new developing products of our company. It is wireless transmission equipment for our latest mini pure digital.The use of advanced time division processing , tdd bidirectional network transmission and the leading cofdm modulation technology combined, provide complete bi-directional encryption (support aes_128 encryption) network data transmission channel, anti multi-path, high speed mobile data, voice the perfect product. H.264 code technology as the core, assigning channel resources through slot control, through the sub-carrier frequency flexibly assigned to multiple user terminals, within the same frequency maximized realized access multiple endusers multiple access. In the nlos and high speed movement realize real-time two way transparent information transmission, multiple wireless networks can be integrated with each other layout large network coverage. As its super small volume, light weight especially suitable for application in uav, high-speed rail, train and other complex environments. Features: *provide up to 6.5mbps of data flow, dynamic adaptive rate allocation technology *the baud rate can up to 921600bps maximum. *smart settings, simple operation, easy to use; *support transparent ptp&pmd network technology *safety with aes 128 bit, can set user�??s password; *support non line of sight ( nlos ) high-speed mobile transmission *provide standard rs-232&rs-485 + rj45 ethernet *transmit/receive video audio, data and other multimedia signals simultaneously *support high standards of industrial and military level applications *the small volume, light weight, easy to carry, the radiating aluminum casing *high clear oled digital display, the interface simple and easy operation
Continuous Emission Monitoring System BI7000 Sensor Technology Non Dispersive Infrared Absorption (NDIR), Zirconia (ZrO2), Paramagnetic, Ultraviolet Doppler Optical Absorption Spectroscopy (UV DOAS), Tuneable Diode Laser Spectroscopy (TDLS) Non Dispersive Ultravoilet Absorption (NDUV) Measurement Gas CO : 0-5000 ppm scalable NOx : 0-1000 ppm scalable SO2 : 0-1000 ppm scalable CO2 : 0-20% scalable O2 : 0-30% scalable Cl2 : 0-30 ppm scalable HCl : 0-200 ppm scalable HF : 0-30 ppm scalable H2S : 0-200 ppm scalable HC : 0-5% scalable NH3 : 0-500 ppm scalable Analog Output: 4-20mA analog output Digital Interface RS 485, MODBUS Protocol Relay Output 2 Nos. relay for alarms Power Supply 110/230 VAC, 50 Hz Dimension 19 Rack Heated Sampling Probe Operating temperature : Max. 400 C Mounting : Flange type. 2, 150 rating RF Max. working pressure : 6 bar Voltage : 110-230 V, 50 /60 Hz Heating : Self-regulating 180C For dust concentration : Upto 5 g/m MOC : SS 316 Heated Sample Gas Line Process Tube : PTFE / SS Process Tube Size : 1/4 inch OD Operating Voltage : 230 V AC Max. Operating Temperature : 200 C Sample Conditioning Unit with Industrial Cabinet Aspirator/Pump for sampling flue gas Pre and post cooler fine filters to remove drain, dust and mist in sample gas Auto drain and auto purging (blow back) facilities 2 way solenoid valves for switching, sampling, purging, draining and calibration Flowmeter to regulate and monitor the flow of sample gas Drain pump for continuous removal of condensate Sample Gas Cooler Industrial Cabinet Dimension: 1500 (H) x 600 (W) x 800 (D) mm
We are one of the largest stockists, distributor, manufacturer, and exporters of special cables & wires in india from the leading brands polycab, belden, agilon and medical raw cables. we are proud to currently serve over 5000 customers. we have earned our reputation and specialization in providing the fastest availability of ready in our stock wide range of special, non standard cables sizes which are hard to get in the market variety of shielded/ instrumentation cables, industrial automation data cables (profibus, modbus & rs 485 cables), stranded armoured frls cables, bms screened cables, rubber cables, solar cables, fire survival cables, rf & hf coaxial cables, braided cables, power cable, control cable, fiber optics, jellyfilled cables, audio video cables and special customized cables..
The 100G QSFP28 SR4 optical transceiver integrates the transmit and receive path onto one module. It converts parallel electrical input signals into parallel optical signals, by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The transmitter module accepts electrical input signals compatible with Common Mode Logic (CML) levels. All input data signals are differential and internally terminated. The receiver module converts parallel optical input signals via a photo detector array into parallel electrical output signals. The reCML) levels. All data signals are differential and support a data rates up to 27.9525Gb/s per channel.ceiver module outputs electrical signals are also voltage compatible with Common Mode LogicOn This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface. Features: MTP/MP0 optical connector Single +3.3V power supply Hot-pluggable QSFP28 MSA form factor Up to 100m OM4 MMF Distance 4x28G Electrical Serial Interface (CEI-28G-VSR) AC coupling of CML signals Low power dissipation(Max:3.5W) Built in digital diagnostic function Operating case temperature range:0 to 70 Compliant with 100GBASE-SR4 I2C Communication Interface Applications: 100GBASE-SR4 Infiniband QDR/DDR/SDR 100G Datacom connections Standards: Compliant with IEEE 802.3ba Compliant with QSFP28 MSA hardware specifications Compliant with RoHS
The 100G QSFP28 SR4 optical transceiver integrates the transmit and receive path onto one module. It converts parallel electrical input signals into parallel optical signals, by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The transmitter module accepts electrical input signals compatible with Common Mode Logic (CML) levels. All input data signals are differential and internally terminated. The receiver module converts parallel optical input signals via a photo detector array into parallel electrical output signals. The reCML) levels. All data signals are differential and support a data rates up to 27.9525Gb/s per channel.ceiver module outputs electrical signals are also voltage compatible with Common Mode LogicOn This module features a hot-pluggable electrical interface, low power consumption, and 2-wire serial interface. Features: MTP/MP0 optical connector Single +3.3V power supply Hot-pluggable QSFP28 MSA form factor Up to 100m OM4 MMF Distance 4x28G Electrical Serial Interface (CEI-28G-VSR) AC coupling of CML signals Low power dissipation(Max:3.5W) Built in digital diagnostic function Operating case temperature range:0 to 70 Compliant with 100GBASE-SR4 I2C Communication Interface Applications: 100GBASE-SR4 Infiniband QDR/DDR/SDR 100G Datacom connections Standards: Compliant with IEEE 802.3ba Compliant with QSFP28 MSA hardware specifications Compliant with RoHS
Technical Parameters Travel of X and Y Axes: 250x300 mm; Maximum cutting thickness: 350 mm; Maximum Work piece weight: 200 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 340x500x350 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 1.2 KVA; Approx. Machine size (LxWxH): 1480x1010x1400 mm; Approx. Machine weight: 1050 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 1200x1500 mm; Maximum cutting thickness: 1000 mm; Maximum Work piece weight: 3500 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1300x1900x1000 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 4200x3600x2300 mm; Approx. Machine weight: 10000 kg; Approx. Machine control cabinet size: 1200x800x800 mm; Approx. Machine control cabinet weight: 150 kg.
Technical Parameters Travel of X and Y Axes: 1000x1200 mm; Maximum cutting thickness: Standard: 800 (Can be adjustable) mm; Maximum Work piece weight: 2000 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1010Ã??1500 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 100 square mm/min; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 1.2 KVA; Approx. Machine size (LxWxH): 3100x2500x2300 mm; Approx. Machine weight: 5000 kg; Approx. Machine control cabinet size: 1200x800x800 mm; Approx. Machine control cabinet weight: 150 kg.
Technical Parameters Travel of X and Y Axes: 630x800 mm; Maximum cutting thickness: 600/800 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 680x1080x600 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2265x1865x1980 mm; Approx. Machine weight: 3500 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
DK7745 Technical Parameters Travel of X and Y Axes: 450x550 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 750 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 500x750x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1865x1350x1900 mm; Approx. Machine weight: 1250 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 400x500 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 450 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 460x690x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1600x1240x1400 mm; Approx. Machine weight: 1250 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 350x450 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 300 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 400x650x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1200x1170x1400 mm; Approx. Machine weight: 1440 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 320x400mm; Maximum cutting thickness: 400 mm; Maximum Work piece weight: 300 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 360x610x400mm; Surface Roughness /Ra: Ra less than 2.5u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function; Total machine power: 1.8KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001mm; Pulse width adjustable range: 15-150us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1200x1170x1400mm; Approx. Machine weight: 1150kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80kg.
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 3000 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2200 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1800 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1500 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
