Rotary Vane Wheel Dry Dial Sing Jet Water Meter Suppliers and Manufacturers

Features: Dry register Brass body, for hot water Horizontal installations Protection against external magnetic fields Light weight Meter comply with iso4064 class b Email us

Features Dry register and register with 5 or 8 numbered roller. Brass body can be painted or nickel coated. High accuracy. Measuring unit is m The meters conform to ISO4064 Standard Class B. Working Conditions Water temperature 30 C; hot water meter 90 C Water pressure 1MPa (PN:1.6MPa/16bar) P < 0.1MPa Accuracy From minimum flow-rate (Qmin) inclusive, to transitional flow-rate (Qt),exclusive: + 5% From transitional flow-rate (Qt) inclusive, to overload flow-rate (Qs), exclusive: + 2% (Hot water meter: �±3%) (APS Marines & Logistics)

Features: The meter is a positive displacement water meter with bottom load facility Non-lead bronze meter body Technical data conforms to awwa c708 standard Magnetic drive with lower transmission resistance Easy to read and installation. Email us

ISW1598 STS Split Prepayment Brass Water Meter STS Split Prepayment Brass Water Meter ISW1598 series is a STS (Standard Transfer Specification) compliant, electronic valve controlled, water meter. With ISW1598 series you are assured of continuously good metrology and revenue protection at the same time. A handy remote keypad, as Customer Interface Unit (CIU), is offered to enter recharge tokens and information short codes. The CIU is installed inside customers house, when the meter is kept away from customers reach in locked-up boxes or premises. The communication between CIU and the water meter is LORA. The meter is available with AMR data transmission features Main Features I. Directive 2014/32/EU, OMIL R-49:2013(E)& EN14154 compliant II. Wet dial / dry dial register construction on request III. Switchable between prepayment and post-paid. IV. Pre-programmable low credit warning V. Recharge by inputting 20 digits TOKEN with keypad CIU VI. Brass / plastic meter body on request VII. Reading through LORA and the system of GPRS /3G. VIII. Non- return valve preventing back-flow VIIII.CIU supports to match with different water meters VV. Support the valve control, through the handheld device and the system remote send valve control command.

ISW1598 STS Split Prepayment Brass Water Meter STS Split Prepayment Brass Water Meter ISW1598 series is a STS (Standard Transfer Specification) compliant, electronic valve controlled, water meter. With ISW1598 series you are assured of continuously good metrology and revenue protection at the same time. A handy remote keypad, as Customer Interface Unit (CIU), is offered to enter recharge tokens and information short codes. The CIU is installed inside customerâ??s house, when the meter is kept away from customerâ??s reach in locked-up boxes or premises. The communication between CIU and the water meter is LORA. The meter is available with AMR data transmission features Main Features I. Directive 2014/32/EU, OMIL R-49:2013(E)& EN14154 compliant II. Wet dial / dry dial register construction on request III. Switchable between prepayment and post-paid. IV. Pre-programmable low credit warning V. Recharge by inputting 20 digits TOKEN with keypad CIU VI. Brass / plastic meter body on request VII. Reading through LORA and the system of GPRS /3G. VIII. Non- return valve preventing back-flow VIIII.CIU supports to match with different water meters VV. Support the valve control, through the handheld device and the system remote send valve control command.

Features: 1.Digital reading (lcd), ip65 2.Iso 4064 class c 3.Plastic body 4.Low pressure loss. Email us

Application: The series of water meter is used to measure the total quantity of cold (heat) potable water passing through pipelines. Features: The water meter, the start flow is less than 2l/h. The water meter can access to count every drop of water. Preventing dripping and leakage , making the consumers maintain the people¡¡¥s consciousness of saving water Adopting a stop valve to prevent the user installed water meter in reverse direction. Standard export packing

Single-jet water meter with MID Single-Jet Water Meter model, Long Life Ultrasonic Digital Water Meter Manufacturers Quick Details: Place of Origin Henan, China (Mainland) Brand Name WEILI Model Number WEILI Material Brass Type Wet Product name Single-jet water meter with MID Keyword Single-jet water meter with MID Feature High Precision Size DN15~DN50 Certificate ISO4064 ISO9001:2008 Standard ISO 4064 ClassB Name ultrasonic water flow meter lowes water meter digital display Product Overview: Ultrasonic water meter is to detect ultrasonic waves in the water downstream and countercurrent propagation time difference, This new all-electronic water meter is calculated by the program analysis and processing of water flow rate and then calculate the water flow. Data sheet Item Unit Detailed data Nominal Diameter mm 15 20 25 32 Overload flow Q4 m³/h 3.125 5 7.875 12.5 Permanent flow Q3 m³/h 2.5 4.0 6.3 10 Q3/Q1 250 200 250 200 250 200 250 Transitional flow Q2 m³/h 0.025 0.02 0.04 0.032 0.063 0.05 0.1 0.08 Minimum flow Q1 m³/h 0.016 0.013 0.025 0.02 0.039 0.032 0.063 0.05 Accuracy class Class 2 Temperature class T30ã??T50ã??T70ã??T90 Working pressure MPa 1.6 Pressure class MAP10 Pressure loss class â?³p63 Flow profile sensitivity class U10/D5 Climate & Mechanical environment class Class Bï¼? Installation Position Horizontal or vertical (Down water supply) Main Features: -- No mechanical movable partsï¼?Impurities in water can't be affected, Long service life. -- Compared with the traditional mechanical water meter, the ultrasonic water meter can be measured and has wide range of measurement . It can be measured when it has very small traffic . -- There are many alarm functionsï¼?Battery voltage can alarmã??empty tubes or pipes that are not full of waterã??transducer fault alarm and more -- Low-power design and the use of high-energy batteries, can work for 6 years or more. -- The communication interface is M-BUS and Rs485,it can easily achieve remote real-time monitoring and management on the LAN.

Fan-wheel liquid-sealed anti-reverse water meter Name: fan-wheel liquid-sealed anti-reverse water meter for cold water Category: plastic shell water meter-> Model number: lxsy-15/z-20/z Specification: 15-20 Content: meter design 1. High quality materials(frpa), corrosion resistance. 2. The measuring mechanism can be exchanged. Special features 1. Overload flowrate:qs=2qp(qn=nominal flowrate) 2. Digital-wheel and register are sealed with special with special liquid 3. Clearly reading for a long time 4. Steady and reliable performance 5. Measuring accuracy is up to iso 4064b 6. Anti-reverse water meter, it can be calculated normally when installation is reverse direction of flow. Working condition Water temperaturef_300c Working pressuref_1mpa Feature curve diagram: Reading error:between qs. Flowrate and qt flowrate Max.Reading errorf+2% Between qt flowrate(not including qt):max.Reading errorf+5% Anti-reverse, it can be read nomally and the reading error qp is positive value when meter installed reversedly. Carton box

Origin : Vietnam./Thailand Shipping term : FOB / CIF Incoterm 2020. Minimum Order : 5,000 MT (Metric tons) Packing : 50 Kg bags, 25 Kg bags, 10 Kg bags, 5 Kg bags Shipping method : By container. Contract : Spot deal / 12 Months contract with our subsidiary company in Vietnam. Price : Please send LOI for price Payment term : 30% - 50% payment via TT/MT103 as a deposit for Vietnam Rice contract, with the remaining 70% to be paid in instalments upon delivery.

Origin: Kazakhstan The detailed specification: Meets all International Standards Total Spot quantity order: 2.000.000 BARRELS The price and discount: - FOB ROTTERDAM: DISCOUNT $4 PER BARREL FROM NWE PLATTS CODE LINE â??PJAAV00â?? Shipment: - TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per conditions in Seller`s FCO Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via MT103 Payment Procedure: According to the terms of the contract, to be mutually agreed upon by Buyer & Seller. Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST

Application Measuring the volume of cold potable water passing through the pipeline. Features A)integer vane wheel and magnetic drive, scientifically designed and carefully well manufactured B)numerical wheel register and pointer indication C)magnetic drive, dry dial D)easy long term clear reading E)long work life F)low pressure loss G)the most popular water meter type in the world H)technical data conforms to class b of the iso4064 standard Maximum permissive error A)in the lower zone from qmin inclusive up to but excluding qt is f+5%. B)in the upper zone from qt inclusive up to and including qs is f+2%. Iso4064 b class

Multi-jet dry-dial meter for cold water Nominal flow rate Qn 1.5 to 15 m3/h/ Q3 2.5 to 25 m3/h EEC approval metrological class B·H MID-type examination certificate R160 Good readability even at extreme operational conditions Hermatically sealed counter Antimagnetic shield (optional) ELSTER conText inscription system

Features: 1) magnetic drive, dry-dial 2) dry-dial, frost resistant, clear reading 3) steady and reliable performance 4) low head loss, structure advanced person 5) accuracy conforms iso4064 class b Carton/unit, or as your request