Wide frequency range from 0.5ghz to 40ghz.
High power isolators.
Waveguide circulator
Characteristics Covering wide frequency range163;187;low phase noise163;187;good frequency strucm163;187;wide working temperature range163;187;universal sma rf out and in interface Application Used in microwave measuring instruments, frequency synthesizer, broad band radar recivers and ew systems Description Covering frequency range 8ghz161;162;8161;171;10ghz, etc163;172; low noise design contributes to the excellent low phase noise output)163;187;all the products can be offered both indenpendently and combining with special analog Paper box, or customized.
The Migra Compact 4 (MC4) is a 4-port amplifier with one active output. MC4 offers up to 47 dB gain with two distribution outputs and one loop-through output. The MC4 functions as a line or distribution amplifier in all types of HFC networks, including those using digital transmission. This high gain RF amplifier is well prepared for the full digital loading of broadcast signals.
Long Pulse Single Frequency PM Fiber Amplifiers for DWDM transmission system We will try our best to provide products similar to keopsys fiber amplifier like CEFA-C-WDM-LP fiber amplifier and CVFA fiber amplifier, NKT Photonics fiber amplifier like X15/E15/C15/Y10 signal-frequency lasers, NP Photonics fiber amplifier like the Rock Fiber Laser Module and the Rock Table- Top Fiber Laser Source, IPG Photonics fiber amplifier like GLR CW green fiber laser, VLM visible fiber laser and Yeetrbium CW fiber laser, and BKtel Photonics fiber amplifier. You probably see us at following exhibitions: SPIE Photonics West in USA, Photonica in Russia, OPTO Taiwan, LASYS in Germany, OPIE in Japan and so on. Parameter unit Specification Min Typ. Max Part No CKLIA-1550-M-SF-LP Center wavelength nm 1540 1550 1565 Peak power W - - 500 Pulse energy uJ 100 Pulse width ns 200 Repetition rate kHz 20 Output average power W 2.0 - - Beam quality M2 1.3 1.5 Output power stability1 ï¼?8hoursï¼? % - 1 2 Output isolation dB 35 - - SMSR dB 20 35 Input signal average power uW 30 100 Power supply VDC 24 Operating temperature -35 - 65 Storage temperature -40 - 85 Output fiber type PLMA-GDF-25/300-M Core NA 0.09 Output fiber length m >0.3 Output fiber connector FC/APC or collimator 3-port circulator On request Dimension mm 300(L)X170(W)X25(H) 1. The output power stability is measured under 25ï¼?30 minutes after warm-up; 2. For more information about integrated 3-Port Optical Circulator, please contact with us
Used AVID 16X16 i/o WITH HD NATIVE CARD- EXCELLENT CONDITION-----2000Euro Used Midas Pro 2 Touring Pack - Roadcase, Snake, Stage Box-------9000Euro Used NEVE 5114 CONSOLE-----15000Euro 18x of CROWN Macro-Tech 5002VZ Stereo Power Amplifier-----18000Euro Used Crown I-T8000 ITECH I-TECH 8000 Professional Power Amplifier---1500Euro Powersoft - K Series K8 DSP+AESOP ------3000Euro Powersoft - K Series K10 DSP+AESOP ---------3500Euro Chandler Limited Redd.47 Matched Pair Boxed----3000Euro Fender Pro Reverb------1500Euro Splawn Quick Rod 100W Head WHITE----1200Euro Apogee Symphony I/O With 8 Analog I/O + 8 AES I/O Module-------1200Euro Orange Rockerverb 100 100 watt Guitar Amp head----1000Euro Splawn Nitro 100 watt all tube electric guitar head-----1000Euro Mesa Boogie John Petrucci Signature 2C Mark II Tube Head-----1500Euro Ampeg B15 Portaflex---1500euro AMPEG B-12 N VINTAGE 1960 USA BASS AMP-----1200Euro AMPEG Classic SVT + BOX 8x10-----1200EURO
Features: - aluminum hair line front panel and knobs - toroidal big power transformer, original imported amplifier tube - usb/sd slot support mp3, wma, hifi ape, flac format audio files - with lcd display - bluetooth receiver, compatible with ios and android system - fm tuner, automatic search and save channels, can preset 50 channels - high level digital karaoke, can match with wireless microphone Technical specification - input impedance: 200mv/47ko - signal-to-noise:>78db - load impedance: 4~16o - frequency response: 20hz-20khz - output power: 100w+100w - machine size: 430x340x125mm
Description: WLAN-2300-1W is an indoor solution 1W bi-direction Booster designed for 2.4GHz wireless LANs. This unit comes with an easy plug-and-play installation, which works together with an indoor Wireless Access Point to improve its operation range and performance. In certain conditions the unit is able to double the range of the wireless device. The unit extends signal range and can eliminate the use of an additional radio with its associated data line, power outlet, signal interference, and setup headaches. The unit is the fast and easy way to extend your signal range in any environment. The unit is ideal for use with 2.4 GHz frequency hopping or direct sequence spread spectrum radio modems and 11 mbps IEEE802.11b devices. The amplifiers increase range by providing transmit gain as well as low-noise receive gain. This receive gain increase the receive sensitivity of wireless LAN Access poing. Full output power of 500mW is achieved with only 32 mW input into the Booster. Specifications: Operating range : 2400-2500MHz Operating mode : Bi-directional, half-duplex Time Division Duplex Senses RF carrier from Transmitter and automatically switches receive to transmit mode Connector Type: SMA Receptacle (50 ohm) Transmit gain : 15dB (Adjustable) Input Trigger Power: 5~20 dBm Optimal Input Power: 9~13 dBm Receiver Gain:
Product Description: In order to retain our goodwill in this industry, we are providing a latest array of Tennis Ball. Features: High air retention capacity Elegant design Light weight Specifications and uses: Red in color Fine woolen mesh lining cloth used Weight: 110 -120 gm Heavy weight quality Comes in packing of 3 in a pack Fine bounce and with attractive logo High quality chemical used to increase the strength of the ball
Product Description: With rich industry experience & knowledge, we have been able to provide the best array of Two Piece Leather Ball. Features: Superior quality High grade material Fine finish Specifications and uses: 70-75 Thread Counts Fine revived leather (wazirabadi) fine readymade cork used with double lining inside to longer strengthening chemically treated for longer durability even on water surface Available in two qualities
Model no. Cl-892 Moq/pcs. 1000 Type deckless mp3 usb/sd player Standard function: Light illumination blue or red Lcd display blue Fm preset stations 18 Play format usb/sd/mmc/wma/id3 Amplifier ictda7388ic 45w*4ch/tda7377 ic 25w*4ch Rca line out 2 lines Auto seek/store stations Stereo control Treble/bass/balance/fader, Preset eq (pop/rock/classic/flat) Package: Product size mm(lxwxh)178*154*50 Color box size mm(lxwxh)214*208*74 Carton size mm(lxwxh)440*400*230 N.W./g.W.(ctn)kg 7.5/9 20' standard 7000pcs Pcs/ctn 10
Model no. Cl-867 Moq/pcs. 1000 Type deckless mp3 usb/sd player Standard function: Light illumination blue or red Lcd display blue Fm preset stations 18 Play format usb/sd/mmc/wma/id3 Amplifier ictda7388ic 45w*4ch/tda7377 ic 25w*4ch Rca line out 2 lines Auto seek/store stations Stereo control Treble/bass/balance/fader, Preset eq (pop/rock/classic/flat) Am, bluetooth, iso cable Package: Product size mm(lxwxh)178*154*50 Color box size mm(lxwxh)214*208*74 Carton size mm(lxwxh)440*400*230 N.W./g.W.(ctn)kg 7.5/9 20' standard 7000pcs Pcs/ctn 10
8001b is a 8-channel gsm fixed wireless terminal. It can produce a fxs line to allow a regular phone to be connected and used just like a local landline(pstn) except your calls will go out the gsm network. This device can both receive and make calls. The main application is: connecting the rj-11 fxs line to connect ordinary telephone set for voice call, to connect pbx for call extentions, to connect billing systems for public phone use, to connect voip gateway to realize voip call termination, to connect alarm system for security purpose, etc. It is not a voip gateway, nor a gsm+voip gateway, it is a gsm fixed wireless terminal that produces a analog fxs phone line. 1.It is a 8-channel gsm fixed wireless terminal that has 8 ports fxs interfaces; 2.Each port has 1 sim card (1.8v, 3v) 3.It can connect with ordinary telephone set, pbx, voip gateway, billing meter etc. 4.It is compatible with asterisk 5.Dialing tone frequency: 450hz 6.Employ industrial module (850/900/1800/1900mhz) 7.Can adjust voice volume by setting up from telephone set 8.Caller id display nal strength by led indicator 16.Imei change Carton
The NEW Fully-automatic BIB Bag Filler | WEB Fed Bag-in-Box Filling Machine Difference from the previous generation of fully-automatic Bag-in-Box filling machine: 1) Different direction and higher exit of filled bags, which makes the filling machine match our carton packaging line better. 2) Cutting bags apart after filling and capping, which makes it easier for users to fill different sized bags. The NEW Fully-automatic BIB Bag Filler | WEB Fed Bag-in-Box Filling Machine is especially for filling spout-prepared bags with a wide range of liquids like drinking water, post mix syrup coke, edible oil and beverage. It features fully-automatic by employing PLC and touch screen control system. The whole process of continuous bags feed, decapping, vacuumization (optional), nitrogen injection (optional), filling, capping, cutting apart from continuous bags and transiting to the conveyor can be completed automatically, no human operation required. This machine can cap various spigots including Vitop and Scholle's. It is designed with CIP (Clean in Place) function and circuit connection. Features: 1) Fully-automatic, continuous WEB type bags fed. 2) Easy to use. The touch-screen control system makes operation easy. 3) Self-test and protecting function. 4) An electromagnetic flow meter system employed improves filling precision and truly achieves the quantitative filling. 5) Grade 304 stainless steel body and 316L stainless steel fluid-contact parts. 6) Filling a different capacity bag acceptable only by changing the setting. 7) Perfect spout clamping system ensures reliable running of the machine and meanwhile no damage to the bag spout. 8) Options of vacuumization and nitrogen injection available for specific products use. Specifications: Applicable bags: pre-cut continuous module or WEB type bags, spout-prepared, 3-25 litres. (Spout is called "Gland" or "Flange" too.) Filling capacity: 500 bags/hour for 5 litres 400 bags/hour for 10 litres 300 bags/hour for 20 litres Power: 3KW Compressed air: 6-8bar, 1.5m3/h. Procedures: 1. Automatically feed bags. 2. Automatically decap, fill, cap and then cut apart from the continuous bags. 3. Automatically exit filled bags. Fully-automatic. Grade 304 stainless steel construction and grade 316L stainless steel fluid-contact parts. World famous brands of key components and many are imported. Absolutely EU quality standard, but less than half of EU price. We also supply the matched box packaging line.
Fully-automatic Bag-in-Box Filling and Packaging Line The Fully-automatic Line includes: 1) The Fully-automatic Bag in Box Filling Machine 2) Hot Melt Glue Box Erector 3) Bag Inserter 4) Hot Melt Glue Box Sealer 5) Conveying Systems About the Fully-automatic BIB Filling Machine The Fully-automatic Bag-in-Box (BIB) Filling Machine is especially for filling spout-prepared bags with a wide range of liquids like drinking water, juice, milk, edible oil and beverage. It features fully-automatic by employing PLC and touch screen control system. The whole process of cutting apart from the fed continuous bags, delivering to heads for decapping, vacuumization (optional), nitrogen injection (optional), filling, capping and transiting to the conveyor can be completed automatically, no human operation required. Features: 1. Fully-automatic (automatically and continuously feeding rolled bags, filling, capping and conveying). 2. Easy to use. The touch-screen control system makes operation easy. 3. Self-test and protecting function. 4. Electromagnetic flow meter system improves filling precision and truly achieves the quantitative filling. 5. Grade 304 stainless steel body and 316L stainless fluid-contact parts. 6. Filling a different capacity bag acceptable only by changing the setting. 7. Perfect gland clampping system ensures realiable running of the machine and meanwhile no damage to the bag gland. 8. Options of vacuumization and nitrogen injection available for specific products use. Specifications: Applicable bags: pre-cut continuous module or WEB type bags, spout-prepared, 3-25 litres. (Spout is called "Gland" or "Flange" too.) Filling capacity: 500 bags/hour for 5 litres 400 bags/hour for 10 litres 300 bags/hour for 20 lires Power: 3KW Compressed air: 6-8bar, 1.5m3/h. Procedures: 1. Automatically feed bags. 2. Automatically cut apart, decap, fill and cap bags. 3. Automatically ecrect boxes and seal bottoms with hot melt glue. 4. Automatically drop filled bags in boxes. 5. Automatically seal the boxes with hot melt glue. Fully-automatic. Grade 304 stainless steel construction and grade 316L stainless steel fluid-contact parts. World famous brands of key components and many are imported.
This Fully-automatic BIB Filling Machine | WEB Fed Bag-in-Box Filler is especially for filling 3-25L spout-prepared bags with a wide range of liquids like drinking water, juice, milk, edible oil and beverage. It features fully-automatic by employing PLC and touch screen control system. The whole process of cutting apart from the fed continuous bags, delivering to heads for decapping, vacuumization (optional), nitrogen injection (optional), filling, capping and transiting to the conveyor can be completed automatically, no human operation required. This machine can cap various spigots including Vitop and Scholle's. It is designed with CIP (Clean in Place) function and circuit connection. Features: 1) Fully-automatic, continuous WEB type bags fed. 2) Easy to use. The touch-screen control system makes operation easy. 3) Self-test and protecting function. 4) An electromagnetic flow meter system employed improves filling precision and truly achieves the quantitative filling. 5) Grade 304 stainless steel body and 316L stainless steel fluid-contact parts. 6) Filling a different capacity bag acceptable only by changing the setting. 7) Perfect spout clamping system ensures reliable running of the machine and meanwhile no damage to the bag spout. 8) Options of vacuumization and nitrogen injection available for specific products use. Specifications: Applicable bags: pre-cut continuous module or WEB type bags, spout-prepared, 3-25 litres. (Spout is called "Gland" or "Flange" too.) Filling capacity: 500 bags/hour for 5 litres 400 bags/hour for 10 litres 300 bags/hour for 20 litres Power: 3KW Compressed air: 6-8bar, 1.5m3/h. Procedures: 1. Automatically feed bags. 2. Automatically cut apart, decap, fill and cap bags. 3. Automatically exit filled bags. Fully-automatic. Grade 304 stainless steel construction and grade 316L stainless steel fluid-contact parts. World famous brands of key components and many are imported. We also supply the matched box packaging line. For more information, please contact us.
Fully-automatic BIB Filling Machine | WEB Fed Bag-in-Box Filler This Fully-automatic BIB Filling Machine | WEB Fed Bag-in-Box Filler is especially for filling spout-prepared bags with a wide range of liquids like drinking water, juice, milk, edible oil and beverage. It features fully-automatic by employing PLC and touch screen control system. The whole process of cutting apart from the fed continuous bags, delivering to heads for decapping, vacuumization (optional), nitrogen injection (optional), filling, capping and transiting to the conveyor can be completed automatically, no human operation required. This Bag-in-Box Filler can cap various spigots including Vitop and Scholle's. It is designed with CIP (Clean in Place) function and circuit connection. Features: 1) Fully-automatic, continuous WEB type bags fed. 2) Easy to use. The touch-screen control system makes operation easy. 3) Self-test and protecting function. 4) An electromagnetic flow meter system employed improves filling precision and truly achieves the quantitative filling. 5) Grade 304 stainless steel body and 316L stainless steel fluid-contact parts. 6) Filling a different capacity bag acceptable only by changing the setting. 7) Perfect spout clamping system ensures reliable running of the machine and meanwhile no damage to the bag spout. 8) Options of vacuumization and nitrogen injection available for specific products use. Specifications: Applicable bags: pre-cut continuous module or WEB type bags, spout-prepared, 3-25 litres. (Spout is called Gland or Flange too.) Filling capacity: 500 bags/hour for 5 litres 400 bags/hour for 10 litres 300 bags/hour for 20 litres Power: 3KW Compressed air: 6-8bar, 1.5m3/h. Procedures: 1. Automatically feed bags. 2. Automatically cut apart, decap, fill and cap bags. 3. Automatically exit filled bags. Fully-automatic. Grade 304 stainless steel construction and grade 316L stainless steel fluid-contact parts. World famous brands of key components and many are imported. We also supply the matched box packaging line.
Fully-automatic BIB Filler | WEB Fed Bag-in-Box Filling Machine This Fully-automatic BIB Filler | WEB Fed Bag-in-Box Filling Machine is especially for filling spout-prepared bags with a wide range of liquids like drinking water, juice, milk, edible oil and beverage. It features fully-automatic by employing PLC and touch screen control system. The whole process of cutting apart from the fed continuous bags, delivering to heads for decapping, vacuumization (optional), nitrogen injection (optional), filling, capping and transiting to the conveyor can be completed automatically, no human operation required. This filling machine can cap various spigots including Vitop and Scholle's. It is designed with CIP (Clean in Place) function and circuit connection. Features: 1) Fully-automatic, continuous WEB type bags fed. 2) Easy to use. The touch-screen control system makes operation easy. 3) Self-test and protecting function. 4) An electromagnetic flow meter system employed improves filling precision and truly achieves the quantitative filling. 5) Grade 304 stainless steel body and 316L stainless steel fluid-contact parts. 6) Filling a different capacity bag acceptable only by changing the setting. 7) Perfect spout clamping system ensures reliable running of the machine and meanwhile no damage to the bag spout. 8) Options of vacuumization and nitrogen injection available for specific products use. Specifications: Applicable bags: pre-cut continuous module or WEB type bags, spout-prepared, 3-25 litres. (Spout is called Gland or Flange too.) Filling capacity: 500 bags/hour for 5 litres 400 bags/hour for 10 litres 300 bags/hour for 20 litres Power: 3KW Compressed air: 6-8bar, 1.5m3/h. Procedures: 1. Automatically feed bags. 2. Automatically cut apart, decap, fill and cap bags. 3. Automatically exit filled bags. Fully-automatic. Grade 304 stainless steel construction and grade 316L stainless steel fluid-contact parts. World famous brands of key components and many are imported. We also supply the matched box packaging line. For information, please contact us.
WSPS-2450-5000 Solid State Power Generator is specially designed for ISM application. It provides higher than 5kW RF Power, and it can work at CW(Continuous Wave) and pulse status. The features of this product are:Accurate output power adjustment from 10-5000W. Accurate output phase adjustment from 0-360 degree.Accurate duty cycle adjustment under pulse mode. PLL phase-locked technology ensure a high frequency stability Built in circulator and load enable the SSPG adapt to kinds loads that have different VSWR Reasonable protection circuit guarantee a reliable operation.
