Overview Handheld Portable Gigabit Ethernet Tester This handheld Gigabit Ethernet tester is used for the installation and maintenance of 10M/100M/1000M Ethernet. Its functions include network testing, data packet capture, traffic generation, cable testing and BER testing. The Ethernet tester is widely used in BER testing of layer1, layer2, layer3, and RFC-2544. Key Features Handheld Portable Gigabit Ethernet Tester Ergonomic design and easy to carry Jacket cover, tie-in protection, lanyard, hands-free viewing 4.3 in LCD color touch screen, smart navigation menus Results can be shown as texts or graphics 128 sites full line rate 10/100/1000 Mbps traffic transmission RFC2544 automated test, fast network testing and fault location LED indicator, LCD display Large capacity memory for storage of settings and results Online upgrade of firmware Basic Functions Handheld Portable Gigabit Ethernet Tester Full RFC2544 benchmark testing: throughput, frame loss rate, latency and back-to-back Single and multiple site traffic generation Compatible with VLAN tag Connectivity testing: PING, TRACE, ARP SCAN. Conducts termination mode test and frame length, frame type and used ratio status Optical power test and optical module temperature, working current and voltage test Cable VCT: capable of identifying short circuit, open circuit, cable length. Interruption time test Provides test tools including port positioning, packet capture, loopback. Provides external USB drive for data exchange Includes Test Manager Pro software for data management.
ANYK series Fiber Media Converters can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX). It can extend traditional 10/100M fast Ethernet to the distance of 120km through optical fiber link. It possesses stable performance and good quality by adopting latest IC packages from USA and Taiwan. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe network operation. ANYK series external power supply Converters could be used alone, or inserted to 14 slots Converters Rack supplied by DaShi Corp. suitable for the use of Network Centre. Main features Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex; UTP port supports MDI/MDI-X auto crossover; Support link fault pass through function(LFP),with indicator function of link fault: When optical fiber or UTP is at fault, the converter could stop all the link; Support far end fault function; Multiple Optical Transceiver could be chosen: SC, ST or FC, singlemode / multimode; Supporting 1600 bytes packet for management; Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode; Internal Circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction; Internal or External switching power: for users to choose. Technical Specifications Operating standards:IEEE802.3u,10/100Base-TX and 100Base-FX; Data buffer: Built-in 128Kbyte RAM. Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: ST/SC/FC, 100Mbps Cable: UTP: Cat. 5 (the max distance up to 100m) Fiber ( Multimode): 50/125, 62.5/125ª¦m(the max distance up to 2km or 5km) Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125ª¦m(the max distance up to 20 - 120km) Flow Control Full Duplex: Supporting standard IEEE802.3x Half Duplex: back pressure LED: Power, FX Link/Act, FX SD(Signal Detect), TX 100, TX Link/Act, TX FDX,. Power Requirement: AC 170 - 240V, DC 5V. Ambient Temperature: 0 - 50íµ Storage Temperature: - 40 - 70 íµ Humidity: 5 - 90% Dimensions: Internal power: 30í-110í-140mm External power: 26í-70í-94mm
ANYK Series 10/100M Singlemode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 90km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples,because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users. Main features Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex; UTP port supports MDI/MDI-X auto crossover; Support link fault pass through function(LFP),with indicator function of link fault: When optical fiber or UTP is at fault, the converter could stop all the link; Support far end fault function; Multiple Optical Transceiver could be chosen: SC, ST or FC, singlemode / multimode; Supporting 1600 bytes packet for management; Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode; Internal Circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction; Internal or External switching power: for users to choose. Technical Specifications Operating standard: IEEE802.3u, 10/100Base-TX and 100Base-FX Built in 128Kb RAM for data buffer; Connector: UTP: RJ-45,10/100Mbps; Fiber: SC,100Mbps Cable: UTP: Cat. 5 UTP (the max distance up to100m) Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125ª¦m(the max distance up to 90km) Flow control Full Duplex:IEEE802.3x Half Duplex:back pressure LED: Power, FX Link/Act, FX SD(Signal Detect), TX 100, TX Link/Act, TX FDX. Power : AC 220V(170-250V),50Hz; DC: 5V,1A Ambient temperature:0 - +50íµ Storage temperature:-20 - +70íµ Humidity:5% - 90% Dimensions: Power external: 26 (high) x 70 (width) x 94 (length) mm Power internal type: 30 (high) x 110 (width) x 140 (length) mm
10/100/1000m fiber media converters Main features Auto negotiation function allows utp ports to auto select 10/100/1000m and full duplex or half duplex. The utp port supports the connection of mdi/mdi-x auto crossover. Multimode fiber: the max distance up to 224m/ 550m Singlemode fiber: the max distance up to 100km Supporting the max 1536 byte ethernet packet Supporting flow control Adopting internal power supply Technical specifications Operating standards: ieee802.3z/ab, 1000base-t and 1000base-sx/lx Mac address table: 4k Data buffer: 256k Connector: utp: rj-45, 10/100/1000mbps; fiber: sc, 1000mbps Cable : Utp cable: cat 5e or cat 6 (the max distance up to 100m) Fiber : multimode : 50/125, 62.5/125ª8m (the max distance up to 550/224m) Singlemode : 8.3/125, 8.7/125, 9/125ª8m (the max distance up to 100km) Flow control Full duplex: ieee802.3x Half duplex: back pressure. Power: ac 220v(170-260v) 50hz; dc 5v¼2a Ambient temperature¦0 ½ +50µ Storage temperature¦-20 ½ +70µ Humidity¦5% ½ 90% Dimensions ¦40 (high) x 110 (width) x 140 (length) mm
Expi9400pf PCI-E *4 Single-port Fiber 1000M Server adapter lan card We supply Intel 8460B,8460M,8391GT, 8390MT, 8490MT, 8492MT, 8494MT, 9400PT, 9402PT, 9404PT, 8490MF, 8490XF,8492MF, 9400PF, 9402PF, EXPI9301CTBLK, EXPX9501AFXSR, EXPX9502CX4, EXPX9502AFXSR, E1G42ETBLK, HP NC360T, HP NC373T, HP NC364T, HP NC510C, HP AE311A, HP AE312A, IBM 24P0960, IBM 39R6525, 39R6527, 39Y6126, 42C1750, 43W4324, broadcom bcm9402, bcm5751,bcm5715S, Silicom PEG2F, PEG1F, PEG2T, PEG1T lan card and also supply Adaptec SCSI Card such as 39160, 29160 etc and HBA SATA/SAS, LSI SAS 3081E-R, LSI SAS 3801E-R, LSI SAS 3040X-R, LSI SAS 3041X-R, LSI SAS 3041E-R, SATA 3112, SATA 3114, SATA 3124, SATA 3132 .
Web-based programmable controller, network environment controller, modbus tcp to rtu , ascii gateway, zigbee, ethernet digital i, o, ethernet to rs- ethernet, chip license, wireless lan to serial.
Wireless lan / telecom products, access point, bridge, repeater, mesh ap, cpe, antenna, poewr amplifier, power of ethernet.
Ethernet switch, adsl2+, router, fax modem, lan card, reader and wireless network products..
Fiber optic media converter 10M/100M media converters and 1000M media converters Products capability: According with the protocals: IEEE 802.3 IEEE 802.3u Fast Ethernet and IEEE802.3ab Support long data packet Easily for setting and debugging Technology specification: Wavelength:1310nm and 1550nm LAN port speed:10M/100M and 1000M Transimission distance:20km 40km 60km 80km 120km
10/100m management switch Complies with ieee802. 3 10base-t, ieee802.3u 100base-tx. Store and forward 111function. . Full / half duplex mode, supports auto-negotiation technology . Plug and play installation with automatic port configuration . 1610/100m self-negotiable rj-45 ports, auto-shift 10base-t and 100base-tx. .Basic board width: 4.8 gbps, supply separate board width for each port to 111realize real bon-blocking transmission . Store-and-forward .Built-in 4m bit data buffer, supply full forwarding rate . Supports port trunking . Supports vlan function, max. 16 vlan groups & 802.1q 32 vlan groups max. . Supports 3 kinds of pri setting: port, tos, ieee802.1p .19" standard rack-mounted size -
10/100m+gigabit port switch Auto mdi/mdi-x on each port to simplify integration into a network complies with the ieee802.3, ieee802.3u, and ieee802.3ab features store-and-forward mode with wire-speed filtering and forwarding rates ieee802.3x compliant fullduplex flow control led indicators for simple troubleshooting . -
Switch LAN Cards (NICs), Reborn Cards, SOHO Ethernet Switch, 19" Ethernet Switch, Converter, 56K Modem, DSL Modem/Router, USB / 1394 Cards, TV Box.
Zinc Ingots, Aluminium Ingots, Cadmium Ingots, Lead ingots, Copper scrap, Lan cables, Ethernet cables, Sandwich PUF Panel.
Ethernet switch, hub, lan cards, internal 56k fax modem, external 56k fax modem, adsl modem, router and card reader.
Product Details : Network Cable is designed for optimal support of High-Speed data protocols for support frequencies of up to 600 MHz And Cat6a can support up to 100 meters when transmitting 10Gbps.VTech Network Cable is designed to be quick and easy to install the cable requires no specialist installation tools, The Low smoke cable is supplied in box packaging for fast, snag free installation. This VTech cable is numbered from 305 meter to 1 meter to allow quick and easy calculation of the cable remaining in the box and reduce cable wastage. The network cable has a polyethylene cross filler to ensure optimum cross talk performance. Solid Bare Copper Cable, 4 pairs, category 6a, solid. Twisted pairs with FR PVC FR PVC insulation has better fire retardant properties than normal PVC Cable Type : Twisted Pair Patch Panel Type : Cat 6a Color : Blue Cable length : 305 meter Product Features: High-Performance Data Cable 650MHz Bandwidth for Data Applications Category 6a Shielded Twisted Pair Easily Identified Color-Striped Pairs 23AWG Solid Bare Copper 0.56mm Conductors Exceeds TIA/EIA-568B.2-1, ISO/IEC 11801 305mtr (1000ft) in Box Specifications Meets ANSI/EIA/TIA 568, IEC 61156-5 requirements Applications Cable is used for indoor and outdoor applications. Fixed installations, high bandwidth digital applications with low BER and high data rates. Materials: Conductive material: Wire made of Solid Bare Copper Conductor insulation: PVC Aluminum Foil Nylon Cord The cable outer jacket: FR PVC, Blue Color
Product Details : Network Cable is designed for optimal support of High-Speed data protocols for support frequencies of up to 700 MHz And Cat7 can support up to 100 meters when transmitting 10Gbps.VTech Network Cable is designed to be quick and easy to install the cable requires no specialist installation tools, The Low smoke cable is supplied in box packaging for fast, snag free installation. This VTech cable is numbered from 305 meter to 1 meter to allow quick and easy calculation of the cable remaining in the box and reduce cable wastage. The network cable has a polyethylene cross filler to ensure optimum cross talk performance. Solid Bare Copper Cable, 4 pairs covered with foil, category 7, solid. Twisted pairs with FRLS PVC FRLS PVC insulation has better fire retardant properties than normal PVC Cable Type : Twisted Pair Patch Panel Type : Cat 7 / Cat 7a Color : Red, Grey, Blue, Yellow, Green Cable length : 305 meter Product Features: High-Performance Data Cable 650MHz Bandwidth for Data Applications Category 7 Shielded Twisted Pair Easily Identified Color-Striped Pairs 23AWG Solid Bare Copper 0.56mm Conductors Exceeds TIA/EIA-568B.2-1, ISO/IEC 11801 305mtr (1000ft) in Box / Roll / Drum Specifications Meets ANSI/EIA/TIA 568, IEC 61156-5 requirements Applications Cable is used for indoor applications. Fixed installations, high bandwidth digital applications with low BER and high data rates. Materials: Conductive material: Wire made of Solid Bare Copper Conductor insulation: PVC Each pair with Aluminum Foil + All pair also with Aluminum Foil Alloy Bedding + Nylon Cord Outer jacket is Flame Retardant, Low Smoke Low Halogen (FRLS) PVC
Product Details : Network Cable is designed for optimal support of High-Speed data protocols for support frequencies of up to 700 MHz And Cat7 can support up to 100 meters when transmitting 10Gbps.VTech Network Cable is designed to be quick and easy to install the cable requires no specialist installation tools, The Low smoke cable is supplied in box packaging for fast, snag free installation. This VTech cable is numbered from 305 meter to 1 meter to allow quick and easy calculation of the cable remaining in the box and reduce cable wastage. The network cable has a polyethylene cross filler to ensure optimum cross talk performance. Solid Bare Copper Cable, 4 pairs covered with foil, category 7, solid. Twisted pairs with FRLS PVC FRLS PVC insulation has better fire retardant properties than normal PVC Cable Type : Twisted Pair Patch Panel Type : Cat 7 / Cat 7a Color : Red, Grey, Blue, Yellow, Green Cable length : 305 meter Product Features: High-Performance Data Cable 650MHz Bandwidth for Data application Category 7 Shielded Twisted Pair Easily Identified Color-Striped Pairs 23AWG Solid Bare Copper 0.56mm Conductors Exceeds TIA/EIA-568B.2-1, ISO/IEC 11801 305mtr (1000ft) in Box / Roll / Drum Specifications Meets ANSI/EIA/TIA 568, IEC 61156-5 requirements Applications Cable is used for indoor and outdoor applications. Fixed installations, high bandwidth digital applications with low BER and high data rates. Materials: Conductive material: Wire made of Solid Bare Copper Conductor insulation: PVC Each pair cover with Aluminum Foil Nylon Cord Outer jacket is Flame Retardant, Low Smoke Low Halogen (FRLS) PVC
As a manufacturer we can provide all type of LAN Cables Like. CAT5 / CAT5e / CAT6e / CAT6a / CAT7 for Indoor as well as Outdoor used. UTP / FTP / STP / SFTP / Armored All types of LAN Cable we provide in Box / Wooden Drum / Roll
Ethernet switch Complies with ieee802. 3 10base-t, ieee802.3u 100base-tx. Store and forward 111function. Full or half duplex, Plug and play installation with automatic port configuration 24 10/100m self-negotiable rj-45 ports, auto-shift 10base-t and 100base-tx. Basic board width: 4.8 gbps, supply separate board width for each port to 111realize real bon-blocking transmission Store-and-forward Built-in 4m bit data buffer, supply full forwarding rate 19" standard rack-mounted size Power: 90-240vac·+50-60hz Operation temperature: 0 ~ 50 f¦ Store temperature: -20 ~125 f¦ Operation moisture: 10~90% Store moisture: 5~90% Size: 440*177*44 mm Weight: 3.5kg (with packing)
Ethernet switch Complies with ieee802.3 f=ieee 802.3u ieeef=802.3xf=802.1p Store and forward function. Full / half duplex mode Plug and play installation with automatic port configuration 16 10/100m self-negotiable rj-45 ports, 1 uplink port. Auto-shift 10base-t 111and 100base-tx. All ports support ieee802.3x full duplex flow control, and half duplex 111back-pressure flow control Basic board width: 3.2 gbps, supply separate board width for each port to 111realize real bon-blocking transmission 4k mac address Switch led indicator: 1 led (power) Port led indicator: 2 leds (link & 10/100mbps) Power: 100-240vac·+50-60hz Operation temperature: 0 ~ 40 f¦ Store temperature: -20 ~70 f¦ Operation moisture: 10~90% Store moisture: 5~90% Size: 440*177*44 mm
