Innovation: Applicable to high-cold area Working temperature: -50~80 Auxiliary unloading valve patent technology Wetting-proof patent technology New-type oil tank guarantees that the lube flows by "fifo" rule Overview: Alp100 series lubrication pump is a closed system, consisting of dc motor, piston pump, relief valve, transparent oil tank, etc. There are alp100 (basic type), alp102(high strength type) and alp103 (high-cold area pump). During installation, the pump is fixed in a relatively closed protection box to avoid collision. 1. High strength pump can pump highly viscous lube. 2. High adaptability to operating limit and temperature range. 3. In severely cold areas, a temperature control sensor will be installed to guarantee the good operation of centralized lubrication system in high-cold regions. 4. Two fuel feeding valves are installed on the pump, which is convenient to refill the oil tank. 5. Pump nlgi-1# lithium grease during the whole year, solving the application problem in high-cold areas. 6. The auxiliary unloading valve patent technology effectively solves the unloading problem in long oil pipes. 7. Wetting-proof patent technology makes sure that the equipment works well in low-lying and waterlogged areas. 8. New-type pump structure guarantee the lube to follow "fifo" rule, effectively avoiding the deposition and deterioration of lube.
Innovations: With air-pressure reservior, the pump can work with nlgi-3# extreme pressure lithium-based grease all year around, be with better lubrication effect. With temperature control sensor, the pump can work well in alpine and frozen regions. With invation patent for flooding safety device, the pump can work well in the low land with water. The pump allows the grease in and out the reservior first, that effectively solving the grease deterioration caused by long-term accumulation. The baroswitch for the air-pressure reservior makes the grease filling easy and convenient.
Hydrax 32/46/ 68/ 100/ 150/ 220 are high quality range of oils formulated using mineral base oils with antifoam, antioxidant, anti-wear mmd antiriist additives, meeting the requirements of most hydraulic systems. APPLICATION For automotive and industrial equipment, with a wide range of viscosities to suit all practical needs requiring high performance hydraulic oil. Beneftts Excellent anti-wear protection, oxidation resistance and thermal stability. Excellent demulsibility facilitates spontaneous separation of the oil from water ingress. Low pour-point enables a wide range of application at different temperatures. The high viscosity index ensures constant flow, low friction loss and good hydraulic efficiency. The antifoam properties and ready release of entrained air prevents operational difficulties with pumps.
Electric lube feeding pump An electric lube feeding pump is composed of a transmission part, a sealing part, a pressurizing device, oil lifting part, safety valve, and lube feeding part, etc. Inserted into the standard 15kg oil tank, it is convenient to use. Working Principle: The transmission part drives the oil lifting part to move up and down, making the one-way valve inside the cavity to close or open. When the one-way valve close, the lube feeding pump sucks lube. On the contrary, the pump presses the lube out. Component Structure: transmission part sealing part pressurizing part oil lifting part Advantages: With high flow and high pressure, our electric lube feeding pump is highly efficient with good performance. The flow of current electric lube feeding pumps in domestic and international markets is less than 0.5L/min (lube 2# ). However, the flow of our lube feeding pump is 1L/min(lube 2# ), which is twice that of other pumps in the market. Parameters: 1. Electricity:AC220V, 50Hz 2.The output of the outlet at ordinary temperature:1.2L/min(without oil pipe);1L/min (with 6M oil pipe) 3.The output of the outlet at low temperature(-10°C):0.9L/min(without oil pipe);0.7L/min(with 6M oil pipe) 4. Max delivery pressure:30MPa 5. Lube:0-3# lithium grease 6. The specification of pipes:Length 6M, pipe diameterÏ?13*Ï?22 Fittings Customization: 1. Pipe:max length: 10 meters 2. Pipe connectors: The customer can buy them by their own or provide us with their models for customization.
COMPRESSOR on. Blended from refined based stocks with Antioxidant and Rust Inhibitor to provide satisfactory lubrication under high temperature and high load conditions. APPLICATION Acts as a barrier against contaminants, preventing them from entering the compressor and causing damage. BENEFITS Improved compressor performance and efficiency. Enhanced ec{uipment reliability and durabi1ityâ?¢. Reduced maintenance costs and downtime. Lower energy consumption. Protection against rust, corrosion, and excessive wear.
Overview: Alp120 series high-pressure lube pump, honored with patent technologies, is applicable to different equipments. In terms of structure, it can be divided into 3 categories, stir bar, spring piston and air pressuretype. Features: With an self-designed air pressure oil tank, the lubrication system can pump nlgi-3lithium grease with good lubrication in the whole year. Innovative smart temperature controlsensor makes sure the system is applicable to high-cold area. Wetting-proof patent technology makes sure that the equipment works well in low-lying and waterlogged areas. New-type pump structure guarantee the lube to follow "fifo" rule, effectively avoiding the deposition and deterioration of lube. The baroswitch of the air pressure oil tank makes it more convenient to refill lube. Application: Al120 series lubrication pumps have been widely used in various large and medium-sized equipment such as wind power, electricity, mining, metallurgy, heavy machinery, which have a large number of lube points, large quantity of lube and short lubrication cycle.
Biocidal Coveryor Lubricant
Cans And Tera Pack Conveyor Belt Lubricant
Chart recorders Gas analysing meters & detectors Load cells & display units. Instrumentation: flow, level & pressure control equipment for all industrial processes & mediums Vacuum switches generators & pumps Pressure gauges
Sewage Pump
We are one of the concrete pump manufacturers in Korea Brand: SAMIL GIANT in Korea Boom length: 67m 62m 58m 52m 48m 45m 42m 37m 32m 28m 24m 21m Stationary pump, Line pump We are able to send full details if you make an inquiry
We Supply Wide Variety Of Pumps To Our Valued Customer All Over The World. Our Customers Manly From Power, Steel, Sugar, Paper, And Chemical Industries. Few Types Of Pumps Are Listed Below. Please Refer Our Brands Section For Checking Out Our Pump Brands End Suction Pumps Split Case Pumps Multi Stage Pumps Sump Pumps Vacuum Pump Submersible Pumps
Introduction: As one of the professional manufacturer in centralized lubrication system, Autol has applied for more than 50 national invention patents. Our company centralised lubrication system would apply in wind turbine, port machinery, mining machinery, hoisting machinery, ship, construction machinery, woodworking equipment, beverage equipment, etc. AUTOL pump has the advantage of : 1,The patent technology on the flooding safety device can make sure the equipment works normally in the low land with water. 2,The new design of the pumping station allows the grease in and out the tank first, effectively solving the grease deterioration caused by long-term accumulation. 3,The pioneering intelligent temperature control sensor breaks through the problem of the application in alpine and frigid regions. Application: Wind turbine, port machinery, mining machinery, hoisting machinery, ship, construction machinery, woodworking equipment, beverage equipment, etc. Parameters: Model: gear pump and plunger piston pump Control mode: External monitor or Internal monitor Temperature:20 degrees below zero~80 degrees
Salient Features Highly efficient 3-Phase Water Filled Motor - 100% EC grade copper winding - Easily Rewindable - Motor Designed with Higher Cooling Effect Ensures Longer Life - Sustainable uniform performance for years - Ensures long life durability - Optimized Hydraulic & Mechanical Design - Improved efficient performance - Excellent output in Low Radiation - Dynamically balanced design - Zero maintenance Product Specification Power Range : 3.0 HP to 10.0 HP Operating Speed : 0 - 2890 RPM Operating Frequency : 0 â?? 50 Hz Input Solar DC Power Range : 3000 Wp, 10000 Wp Input Solar DC Voltage Range : 330 Vmp , 600 Vmp Head Range : 10 Mtr , 50 Mtr Discharge Range : 126000 LPD , 425000 LPD Type of Duty : S1 Material Of Construction Part Grade Oil Seal : Nitrile butyl rubber Motor Shaft : SS - 420 Motor Body : Cast Iron / J4 Motor Bush : LTB-4 / Teflon Thrust bearing assembly : SS - 420 & Carbon Base : Cast Iron Bracket : Cast Iron Flange : Cast Iron Casing : Cast Iron Impeller : Cast Iron
Highly efficient 3-phase Air Cooled motor - 100% EC grade copper winding - Easily Rewindable - Good suction lift characteristics - Sustainable uniform performance for years - Ensures long life durability - Optimized Hydraulic & Mechanical Design - Improved efficient performance - Excellent output in Low Radiation - Dynamically balanced design - Double shielded ball bearings, so no need of external lubrication - Mechanical seal or stuffing box is provided as per customers requirement - Zero maintenance Product Specification Power Range : 1.0 HP to 10.0 HP Operating Speed : 0 2890 RPM Operating Frequency : 0 - 50 Hz Input Solar DC Power Range : 900 Wp, 10000 Wp Input Solar DC Voltage Range : 110 Vmp, 600 Vmp Head Range : 10 Mtr, 50 Mtr Discharge Range : 45000 LPD - 405000 LPD Max. Suction Head : 7 Mtr Type of Duty : S1 Material Of Construction Part Grade Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Water Pump suitable for Commercial vehicles,Cars
Sewage Pump - B
Inline Pressure Pump
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
