PFB150 Rod Extruder Features: Save time and money. PLC design and easy to operate. Long time span. No heating effect during operation. With latest technology and optimized design. Min - Max Dia:25-80mm. Production Per Hour: 7-12+ kg/h. Automatic operation. Polymer PTFE ROD RAM EXTRUDER AUTOMATIC MACHINE Product Description: Sunkoo PFB80 Rod Extruder(Teflon PTFE Rod extrusion) is designed using latest technology, fully reliable and easy to operate for customers. Performance in terms of production and working hour capacity is competitive to other machines. Low maintenance is required , giving high production in market. RAM Extruder For PTFE Rod(25-80mm) application: 1.Horizontal Ram Extruder for PTFE rod 2.Ram extruding machine for PTFE rod 3.Using for Pre-sintering PTFE material. 4.Suit for new PTFE material or Recycle PTFE material. PFB80 Rod Extruder Features Include: 1. Save time and money, good advantage price offer to customers. 2. Intelligent and easy-to-use operations. 3. Small workplace required due to its compact design and electricity saving machine. 4. Super quality output and the physical properties is adjustable. 5. Precise temperature control, reaches + -1 degree. 6. Long- life, with modern technology and optimized design. The Extrusion Process of PFB80 Rod Extruder: Ram extrusion is a process enabling the continuous production and processing of PTFE (Polytetrafluoroethylene). The basic material is PTFE powder. The powder is fed into a cylindrical extrusion pipe, compressed by means of a ram and at the same time, transported through the pipe, which is heated up to sintering temperature.
Ptfe extruded rod: Description: 1.Ptfe rod could work in temperature of -180~260 2. Good dielectric in mediums. 3. It has not-sticky property. 4. Nice insulation property 2. Self-lubrication Specification of ptfe rod: (oem is available) Diameter(mm)Length(mm)Tolerance 51000-3000mm Properties: ItemData Apparent density2.10-2.30 g/ cm3 Tensile strengthy14 mpa Elongation at breaky140% Working temp-180~260 Melting point330 Produce max.Temp390 Compressive strength 1% deformation400-500% Hardness50-60 shored Water absorption0.01% Application: 1 chemistry industry: used in sealing, pipeline, pipe fitting and high pure agentia household utensils etc. 2. Machine: used in piston ring, guide ring, machine tool guideways etc. 3. Electrical and electronic engineering: used in electric wire, electric cable, electrical condenser film, insulation board etc. 4. Construction: use as bridge, tunnel, large-scale chemical industry pipeline, storage tank supporting bearing slipper. 5. Light textile and other industry: ptfe product have nonstick properties, used in spinning, papermaking, foodstuff, rubber, ceramics etc. Wooden case
Plastic Ram Extruder  Machine For PTFE Rod(Φ80-150mm) This PTFE extruder is able to extrude rod which dia from 80mm to 150mm. The automatic production line is controlled by computer, which is really easy to operate. Meanwhile, the plastic extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service.We can solve various problems to improve the equipment efficiency for you.Ram extrusion machine for Teflon rod The China vertical RAM Extruder is designed with 2 pressure plates, so the ream is affected via a slid pressure plate. The China rod ram extruder is equipped with two hydraulic cylinders. The main cylinder serves to move the ram; the additional cylinder serves for retracting the mandrel. Base plate and dosing tray are water-cooled. The PTFE powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould. Range of diameter PTFE Extrusion 80 to 150 mm, Heating zones 5 zones The complete electrical control is laterally fastened at rod ram extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automatic controllers for speeds and temperatures. Five temperature regulators are contained in the plant, four for the extruding pipe and one automatic controller for a mandrel heating element. The maximum output speed of PTFE extrusion depends on: PTFE Material, outside PTFE rod diameters and PTFE product heating length.PTFE Equipment Warranty: according to our standard terms: 12months Technical Specification: PTFE Rod Extruder Dia 80mm-150mm Technical Data Description Model No. Machine model PFB-150 Plastic Extruder PTFE Rod Power 33 kw Min - Max Dia 80-150 mm Tolerance 1-2mm+ Length Unlimited Production Per Hour 8-16kg Electricity Consumption Per hour 2.5 kw Weight of the Machine 1220 kg High of the Machine 1680mm Floor area of the Machine 1.6 M2 Warrenty for Parts 1 Year Machine Gurantee Period 1 Year Free Spares 1 set Deliver LT 30 Days -
Teflon ptfe extruder Plastic ram extruder machine features: 1, automatic control 2, easy to operate 3, low power consumption 4, product size stability 5, precise sintering 6, environment-friendly and energy-saving Application: Ptfe ram screw extruder products tube, and it has the best chemical corrosion resistance and the dielectric properties, not aging, not sticky, it also has the lowest friction coefficient. So the tube has a wide range of applications Model no. Machine model pfb-80 Plastic extruder Ptfe Power 20 kw Min - max dia 25-80 mm Tolerance 0.5-2 mm Length Unlimited Production per hour 7kg Electricity consumption per hour 2.5 kw Weight of the machine 960 kg High of the machine 1560 mm Floor area of the machine 1.2 m2 Warrenty for parts 1 year Machine gurantee period 1 year Free spares 1 set Deliver lt 30 days About us: Changzhou sunkoo machine tech co., ltd Professional experience: 10+ years only in the field of the ptfe extruder Manufacturing capacity: 50 sets / year. Technology strength: have a professional and experienced designer team to meet your any requirement Model ptfe series is a single screw extruder for extruding dia lower 150mm rod and dia lower 500mm tube. The automatic production line is controlled by computer, which is really easy to operate. Meanwhile, the plastic extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. We can solve various problems to improve the equipment efficiency for you. Hot tags:teflon ptfe rod;teflon ptfe tube, teflon ptfe extrusion -
Specifications of single screw plastic ptfe teflon extruded rod 1. Use virgin ptfe resin to make 2. The size is: A)od: 3mm~25mm, max length 4200mm. B)od: 25mm~150mm, max length 4200. C)od 150~500mm, 1000mm. 3. Tolerance: -0.1~+0.1mm 4. Color: natural white, red, yellow, black. 5. Surfact: smooth, no impurities, no black spot. 6. Perfect package: inside is plastic paper, outside is fumigation wooden box. 7. Delivery time is usually 10days, as can according to the fact quantity to deliver. Characteristics of single screw plastic ptfe teflon extruded rod One key important advantage of ptfe rod is its operating temperature range, it can Easily out perform other engineering plastics by being able to perform continuously At -250°c, right up to an amazing 250°c. Another important advantage of ptfe rod Is its outstanding co-efficient of friction, ptfe is in the record books as having one of The lowest friction values known to man. Ptfe also has excellent acid and chemical Resistance. Another feature of ptfe is its ability to set by or due to compression. Ptfe has excellent electrical resistance. Ptfe is also water repellent and is often used In the manufacture of modern high performing, water repellent and breathable clothing.
Plastic Ram Extruder Machine For PTFE Rod(Φ300-600mm) This PTFE extruder is able to extrude rod which dia from 300mm to600mm. The automatic productionline is controlled by computer, which is really easy to operate. Meanwhile, the plastic extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. We can solve various problems to improve the equipment efficiency for you. Ram extrusion machine for Teflon rod The China vertical RAM Extruder is designed with 2 pressure plates, so the ream is affected via a slid pressure plate. The China rod ram extruder is equipped with two hydraulic cylinders. The main cylinder serves to move the ram; the additional cylinder serves for retracting the mandrel. Base plate and dosing tray are water-cooled. The PTFE powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould. Range of diameter PTFE Extrusion300 to 600 mm, Heating zones 4-6 zones The complete electrical control is laterally fastened at rod ram extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automatic controllers for speeds and temperatures. Five temperature regulators are contained in the plant, four for the extruding pipe and one automatic controller for a mandrel heating element. The maximum output speed of PTFE extrusion depends on: physical property , like Specific Gravity and Elongation, outside of PTFE rod diameters and PTFE product heating length. PTFE Equipment Warranty: according to our standard terms: 12months Technical Specification: PTFE Rod Extruder Dia 300mm-600mm Technical Data Description Model No. Machine model FMY-600 Plastic Extruder PTFE Rod Power 20 kw Min - Max Dia 300-600 mm Tolerance Depends Length 300mm Production Per Hour 9-18 kg Electricity Consumption Per hour 32kw Weight of the Machine 8300 kg High of the Machine  1200mm Floor area of the Machine 14 M2 Warrenty for Parts 1 Year Machine Gurantee Period 1 Year Free Spares 1 set Deliver LT 30 Days Features 1,Advance designed 2, Automatic control 3, Easy to operate 4, Low power consumption 5, Product size stability 6, Precise sintering 7, Environment-friendly and Energy-saving  -
The presintered resin is suitable for continuously extruding of all type, pushing and pressing ptfe rod, tube and other shape products..
Product:Rods Brand:Renaissance Pipe Fitting Inc. Sizes:Refer the specification Condition:New Rating:4.2, based on 42 reviews price:Start from 20 USD SS Rods, ASTM B221, UNS N06600, UNS N02200, UNS N06601, UNS N08800 High Nickel Alloy Rods, supplier. RFP India is India's well-known manufacturer, supplier and exporter of Rods, which is an iron alloy with a very low carbon (less than 0.08%) content in contrast to cast iron (2.1% to 4%), and has fibrous inclusions known as slag up to 2% by weight. Many items, before they came to be made of mild steel, were produced from rods, including rivets, nails, wire, chains, rails, railway couplings, water and steam pipes, nuts, bolts, horseshoes, handrails, wagon tires, straps for timber roof trusses, and ornamental ironwork. Rods might be round, square, rectangle or flat, and flat rods might be narrow or broad. Rod iron is usually a cut from flat bar iron in a slitting mill to provide the raw material for nails.
Ptfe pipe 1) makes from pure ptfe 2) it has an expanded network composed of superfine fivers and joints 3) the combination of flexbility high longitudinal strength and easy deformability in the transverse direction makes expanded ptfe unsintered tape very suitable for packing and threadsealing applications. 4) it is not be suitable for use in certain critical application, for example when contact with high concentration of gaseous oxygen or liqud oxygen involved.
FEATURES: Excellent chemical resistance Low coefficient of friction High operating temperature and stability Physiological insert (virgin) Excellent electrical properties Food prade ptfe powder, machine grade ptfe powder Style: molded polytetrafluoroethylene pipe APPLICATIONS: Suitable for corrosion resistant liner, seal, lining and gasket, guide rail, dielectric material for different frequency, bridge bearing slide, etc. Product thickness (mm) : 1.0mm to 6mm Product width (mm) : 1500, 1200, 1000, 500mm Density (g/cm3) : 2.2 to 2.3
Density ;2.18 ~ 2.3g/cm3 Water Absorption :< 0.01% Working Temperature : -180 ~ +260 Tensile Strength :14Mpa Elongation at Break :140 % Impact Strength of Izod : 13 KJ Hardness Shore :60 ~ 80 A Thermal Deformation Temperature ; 150 Dielectric Strength : 10KV/mm. Product Size (mm) : 10mm to 400mm Product Length (mm) : 150, 300, 500 to 6000mm Density (g/cm3) : 2.2 to 2.3.
We deals in the following products of India, China, Taiwan and Korea Origin:- Steel Tie Rod
We deals in the following products of India, China, Taiwan and Korea Origin:- Aluminium Wire Rod Aluminium Billets
Size : 5,5 mm-25 mm production range Weight min. 2050 max 2400 kg Outside diameter 1250 mm Internal diameter 850 mm Height 1700-2200 mm
Diameter 5.5MM-50.0MM Coil Weight - 2 tons around SPEC - SC/SCR/SCM/HIGH CARBON
Hindalco's copper division, Birla Copper, operates one of the largest single-location custom copper smelters in the world. The custom copper smelter at Dahej in the state of Gujarat (west coast of India) houses three copper smelters, three refineries, two rod plants, a captive power plant, a captive oxygen plant, phosphoric acid plant, di-ammonium phosphate plant, precious metal recovery plant, captive jetty and other utilities. Hindalco produces LME grade copper cathodes, continuous cast copper rods in various sizes, and precious metals like gold and silver. Hindalco is one of the major manufacturers of 19.6mm diameter copper rods, which is used for railway electrification. The co-product, sulphuric acid, is partly utilised to produce phosphoric acid and fertilisers like di-ammonium phosphate (DAP). Birla Copper's brands, Birla Copper and Birla Copper II, are recognized for their high purity and consistent quality in the domestic as well as global markets. Birla Copper is an ISO 9001, 14001, 27001, 50001 and OHSAS 18001 certified company, registered on the London Metal Exchange as Grade-A copper brand, and certified as a Star Trading House having labs for chemical, mechanical and electrical testing accredited by the National Accreditation Board for Laboratories (NABL).
Copper Rod: Grade: 99.99 Capacity: 500 Tones Price: LME + 600$ negotiable Incoterms: CIF Orygin: Zambia Inspection: SGS or a similar inspection agency will conduct inspections at the loading port. Buyer's Rights: The buyer has the right to appoint an independent surveyor acceptable to the seller to be present during the weighing, sampling, and analysis procedures for the cargo. This arrangement is valid for both parties.
Standard ASTM B166 / ASME SB166 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Standard ASTM B160 / ASME SB160 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Standard ASTM A479 / ASME SA479 Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI Round Bars Outside Diameter in the range of 4mm to 500mm Bright Bars Outside Diameter in the range of 4mm to 100mm Hex Bars 18mm â?? 57mm (11/16â?³ to 2-3/4â?³) Square Bars 18mm â?? 47mm (11/16â?³ to 1-3/4â?³) Flat Bars 1/2â?? to 10â?? in thickness range of 2mm to 150mm Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish Length 1 to 6 Meters, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
