Psz1021 Honda Odyssey Special Car Charger Suppliers and Manufacturers

Product Introduction SANDI AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-750VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface (Optional)

EANï¼? Commodity code: PSZ018. Trade name: PSZ018. For Honda Civic (2016) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 15W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN/ctn Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal. Step Price (FOB): 1. Sample unit price USD129.40 2.20set, USD77.70 3.40set, USD67.00 4.60set, USD63.00 5.80set, USD56.60 6.100set, USD51.00 7.200set, USD45.90 8.300set, USD41.30 More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

PSZ1065S. Honda CRV 2017-2021 Dedicated Multifunctional Wireless Car Charger. technical parameter: Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 10W Conversion efficiency: 75% + Input parameter: 9-16V Output parameters: 5-9V Operating temperature: - + 70 Operating frequency: 110KHz-205KHz Input interface: mounted power supply Charging mode: electromagnetic induction [wireless end] USB Installation position: central content box Before Honda Car Wireless charger Honda CRV (GM) Car charger iPhone / Nokia / Samsung mobile phone wireless charger Xiaomi / OPPO / vivo / Sony / Dpod / Blackberry / HTC etc mobile phone wireless charger Motorola / LG / Android / Huawei mobile phone wireless charger headset wireless charger, watch wireless charger car key wireless charger, auto induction wireless charger wireless fast charger, car wireless charger 5W / 10W / 15W wireless charger QI wireless charger USB charger Mobile phone accessories Universal charger Solar mobile phone charger Wii charger Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC. 5.USB fast charging output interface, which supports QC3.0 fast charging protocol. 6.10W Very large coil, FOB foreign body detection, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

EANï¼? Commodity code: PSZ024. Trade name: PSZ024. For Honda Accord 9 generation (2014-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 15W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN/ctn Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal. Step Price (FOB): 1. Sample unit price USD129.40 2.20set, USD77.70 3.40set, USD67.00 4.60set, USD63.00 5.80set, USD56.60 6.100set, USD51.00 7.200set, USD45.90 8.300set, USD41.30 More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

EAN Commodity code: PSZ025B. Trade name: PSZ025B. For Honda Accord 10 generation (2018-2020) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 15W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN/ctn Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

EAN Commodity code: PSZ071. Trade name: PSZ071. For Honda Fit (2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 15W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

EANï¼? Product code: PSZ1005S (PSFC1005). Trade name: PSZ1005S. FOR Honda Accord 10-10.5 generation (2018-2022) wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of the single coil Emission power: 15W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply Charging mode: electromagnetic induction [wireless terminal] USB Installation location: central content box Charging indicator: green is standby, blue is charging, red is foreign or abnormal Left and right steering wheel driving universal. Double coil / 15W motherboard + air cooling + USB / QC3.0 fast charge + power switch + 12V / DC integrated power supply Product Size: 22.2 * 15.2 * 11 cm Commodity weight: 0.60kg 16 PC/CTN Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC. 5.USB fast charging output interface, which supports QC3.0 fast charging protocol. 6.15W Very large coil, FOB foreign body detection, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

EANï¼? Commodity code: PSZ021. Trade name: PSZ021. For Honda Alisson (2016-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of the single coil Emission power: 15W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN/ctn Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable docking. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC. 5.USB fast charging output interface, which supports QC3.0 fast charging protocol. 6.10W Very large coil, FOB foreign body detection, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common. Step Price (FOB): 1. Sample unit price USD129.40 2.20set, USD77.70 3.40set, USD67.00 4.60set, USD63.00 5.80set, USD56.60 6.100set, USD51.00 7.200set, USD45.90 8.300set, USD41.30 More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

EANï¼? 6975913481069 Commodity code: PSZ312. Trade name: PSZ312.For Honda Civic (2017-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 15W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal. Step Price (FOB): 1. Sample unit price is USD121.44 2. 200set, USD72.86 3. 400set, USD65.57 4. 600set, USD59.01 5. 800set, USD53.11 Remarks: Free shipping charge for samples. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

EANï¼?6975913481045 Commodity code: PSZ023. Trade name: PSZ023. Ford Honda Crown Road URV (2017-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 15W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN/ctn Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal. Step Price (FOB): 1. Sample unit price USD129.40 2.â?¥20set, USD77.70 3.â?¥40set, USD67.00 4.â?¥60set, USD63.00 5.â?¥80set, USD56.60 6.â?¥100set, USD51.00 7.â?¥200set, USD45.90 8.â?¥300set, USD41.30 More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

EAN Commodity code: PSZ323. Trade name: PSZ323. For Toyota Crown (low configuration) (2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of the single coil Transmitting power: 15 W and 10 W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal. Step Price (FOB): 1. Sample unit price USD129.40 2.20set, USD77.70 3.40set, USD67.00 4.60set, USD63.00 5.80set, USD56.60 6.100set, USD51.00 7.200set, USD45.90 8.300set, USD41.30 More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

EAN Commodity code: PSF1123. Trade name: PSF1123. For Suzuki Across (2021-2023) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 15W / 10W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-143 KHz Input interface: power supply Charging mode: electromagnetic induction [wireless terminal] USB Installation location: central content box Charging indicator: green is standby, blue is charging, red is foreign or abnormal Left and right steering wheel driving universal. Already passed through the CE FCC RoHS Product Size: 30 * 20 * 8 cm Commodity weight: 0.60kg PC/CTN Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC. 5. Support QC3.0 fast charging protocol. 6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

EANï¼? Product code: PS033. Trade name: PS033. For Volkswagen Tiguan (2014-2018 without) wireless vehicle charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of the single coil Emission power: 15W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply Product Introductionï¼? SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger. Unique function High efficiency over the full load range, full load efficiency greater than 95% Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main featuresï¼? Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs. Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. RS485 interface (Optional)

EANï¼?6975913481021 Commodity code: PS003000008. Trade name: PS003000008.FOR Honda CR-V (2017-2019) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 10W / 5W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-143 KHz Input interface: power supply Charging mode: electromagnetic induction [wireless terminal] USB Installation location: central content box Wireless charging induction distance: less than 4mm Charging indicator: green is standby, blue is charging, red is foreign or abnormal Left and right steering wheel driving universal. Already passed through the CE FCC RoHS Product Size: 23 * 15 * 5cm Commodity weight: 0.33kg PC/CT Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC. 5. Support QC3.0 fast charging protocol. 6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal. Step Price (FOB): 1. Sample unit price USD117.70 2.â20set, USD70.60 3.â40set, USD63.50 4.â60set, USD57.20 5.â80set, USD51.50 6.â100set, USD46.30 7.â200set, USD41.70 8.â300set, USD37.50 More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

EANï¼? Commodity code: PSZ066. Trade name: PSZ066. For Honda Fit (2014-2019) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of the single coil Emission power: 15W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN/ctn Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light "green" is in standby state, "blue" is in charging, and "red" is in foreign body or abnormal. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.

Feature: 1. 2014 popular and fashion car charger 2. Car charger can receive traffic infomation channel to identify the traffice jam in front us 3.Imprint customer's logo as request 4.Maufacture with competitive price & good quality 5.Custom packing design service 6.1-2pcs free samples available 7.Ce/e-mark/fcc/rohs certifications Length 5.9cm Diameter 2.3cm Weight 22g