Sunday Optics provides many kinds of roof prisms including Schmidt Roof Prism Lehmann Roof Prism Abbe Roof Prism Penta Roof Prism and Combined Roof Prism, etc. Lehamann Prism Material: Optical glass, H-K9L, Quartz Size:5-300mm Angle Tolerance:3' Size Tolerance:+/-0.05mm Coating: AR BBAR Metal
Anamorphic Prism Pairs are used to transform elliptical laser diode beams into nearly circular beams. Because the prisms are set near Brewster's angle and with AR coating customized to the angle of the index SF11 glass, an average throughput of 95% can be achieved. Specifications: Material:N-SF11 Size Tolerance:+/-0.05mm CA 80% Flatness: 1/4 lambda
Roof Prism A roof prism is a reflective optical prism to make two cross beams be parallel with each other. It contains a section where two faces meet at a 90 angle. These two 90 faces resemble the roof of a building, giving this prism type its name. Reflection from the two 90�° faces returns an image that is flipped laterally across the axis where the faces meet. In some cases, passing through the prism, the image is both deflected right-to-left and top-to-bottom. The hypotenuse of the prism utilizes total internal reflection (TIR) to reflect the image through the prism. Polarization states may become rotated during reflection. As a rich experienced manufacturer, substrate material in Photonchina can be chosen from all optical glasses (N-BK7, for instance), Fused Silica, Si, ZnSe, ZnS, CaF2, MgF2 etc.
Photonchina has been focusing on dove prism manufacture for more than decades in order to meet demands of customers worldwide in applications ranging from image displaying to fiber communications. Dove prism is a type of reflective prism which is used to invert an image. These prisms are shaped from a truncated right-angle prism. A beam of light entering one of the sloped faces of the prism undergoes total internal reflection from the inside of the longest (bottom) face and emerges from the opposite sloped face. Images passing through the prism are flipped, and because only one reflection takes place, the image's handedness is changed to the opposite sense. If you look through the prism and rotate it around a longitudinal axis, the image rotates through twice the angle through which the dove prism itself rotates. For optimal performance, you may use dove prisms with collimated light. The top surface of each dove prism is ground and the longest length features an unbeveled sharp edge. Dove Prisms are offered uncoated, with anti-reflection coated diagonal faces, or with aluminized diagonal faces. Aluminized dove prisms feature a protected aluminum coating with black Krylon paint on the diagonal faces and are ideal for displaced retroreflection. They provide a u-turn for incident laser beam light.
All kinds of bespoke optical prisms: equilateral prisms, 45 degree right-angle prisms, rhombic prisms, dove prisms, penta prisms, right angle roof prisms, polarizing beamsplitter cubes (PBS), beamsplitter cubes, etc.
BK7 Glass Powell Lens PARAMETER: The Powell lens is a quantum leap forward in line generator performance over the simple cylinder lens. A cylinder lens produces a poorly illuminated line, one limited by the non-uniform, Gaussian laser beam. The Powell lens' rounded roof is in fact a complex two-dimensional aspheric curve that generates a tremendous amount of spherical aberration that redistributes the light along the line; decreasing the light in the central area while increasing the light level at the line's ends. The result is a very uniformly illuminated line used in all manner of machine vision applications; from bio-medical and automobile assembly to chocolate chip cookie production. The Customized Powell Prism resembles a round prism with a curved roof line. The lens is a laser line generator, stretching a narrow laser beam into a uniformly illuminated straight line . Specification Material Fused silica/ BK7glass Diameter 0.8mm, 1mm, 2mm, 3mm, 5mm, 9mm, 10mm, 15mm or customized size Diameter Tolerance +0.0/-0.05mm / ±0.05mm Range of Fan 3°,5°,10°,15°,20°,30°,45°,53°,60°,70°,75°,85°,90°96°,100°,110°,120° Angle tolerance 90% Bevel
Prisms Optical Components PARAMETER: BK7 Glass Dove Prism have an unusual and very interesting characteristic , if you look through the prism and rotate it around a longitudinal axis, the image rotates through twice the angle through which the dove prism itself rotates. For optimal peformance, use dove prisms with collimated light. Specification Material BK7 glass / Fused Silica Dimension tolerance + 0.0 / -0.2mm Deviation 3arc min. Flatness λ/2@632.8nm Clear aperture >85% Surface quality 60/40, 40/20 Bevel 0.1mm Ã?45°
PARAMETER: Rhombic prisms are used to displace a beam laterally without changing its direction. They may be coated to transmit part of the beam and produce two parallel and displaced emerging beams. Can be coated to produce a polarizing beam separator. These prisms are manufactured from either BK7A or Fused Silica. Rhomboid Prism with Coating are supplied uncoated but many coating options are available. Rhomboid prisms are commonly used to displace a laser beam without changing its direction. In imaging applications, rhomboid prisms will displace the optical axis without inverting the image. The lateral displacement is equal to the length of the prism. Specification. Material: BK7 glass / UV Fused Silica Surface Flatness: < λ / 8 @ 633 nm Surface Quality: 60/40, 40/20, 20/10 Dimension Tolerance: < + 0.00 / 0.20 mm Angular Deviation < 3 arc min~ 30arc sec. Clear Aperture: > 85% Bevel: 0.3 mm x 45° Coating As per customers request
Optical Components Fused Silica Wedge Prism PARAMETER: The wedge prism is a prism with a shallow angle between its input and output surfaces. This angle is usually 3 degrees or less. Refraction at the surfaces causes the prism to deflect light by a fixed angle. When viewing a scene through such a prism, objects will appear to be offset by an amount that varies with their distance from the prism. Specification Material BK7 glass / Fused silica Surface Flatness: < λ / 10 @ 633nm ~λ/4@633nm Surface Quality: 60/40, 40/20, 20/10, 10/5 (both sides) Dimension Tolerance:
HR manufactures a wide variety of Prisms. Custom designs including right-angle, equilateral (dispersing), and cube Prisms, dove Prisms, roof Prisms, penta Prisms, and retroreflectors. These Prisms are available in a wide variety of materials, including glass, Germanium, Silicon, ZnSe , ZnS , Fused Silica, Quartz and calcium fluoride. Dimension 2mm to 500mm.
Penta Prisms / Beamsplitter Penta Prism / Wedge / Right Angle Prisms / Corner Cube Retroreflectors / Anamorphic Prisms / Dove Prisms / Rhomboid Prisms / Reflection Prism / Dispersion Prisms Penta Prisms Penta prism can deviate an incident beam without inverting or reversing to 90.The deviation angle of 90 is independent of any rotation of the prism about an axis parallel to the line of intersection of the two reflecting faces. It is commonly used in Plumb Level, Surveying, Alignment, Range finding and Optical Tooling. The reflecting surfaces of this Prism must be coated with a metallic or dielectric coating. The standard Penta Prism reflecting surfaces are coated with aluminum or enhanced aluminum. Specifications: Material: BK7 Grade A Optical Glass Dimension (mm): 2.5x2.5 ~ 100x100 Dimension Tolerance (mm): +/-0.2 (General), +/-0.05 (High Precision) 90 Deviation Tolerance: 1 arc min.(General),3 arc sec.(High Precision) Angle Tolerance: 3 arc min. (General), 3 arc sec. (High Precision) Surface Quality 80/50 (General), 10/5 (High Precision) Flatness (per 25mm@633nm) (General),/8 (High Precision) Reflection: 90%@400-700nm Note: (1). Besides N-BK7 glass, other optical glass is available for custom-made Penta Prisms. (2). Penta Prism at bigger size is available. (3). Typical deviation tolerance is 1 minute, better precision such as 30 sec, 10 sec, 5 sec or 3 sec is available. (4). Typical reflection is >90% by Al coating, other metal coating such as Ag, Cu, or High Reflection Dielectric Coating is available. (5). Besides uncoating, Anti-Reflective(AR) coating is available upon request. United photonics Technology
Quilateral, highly polished surface. Available : 38 mm / 50 ml
Paul prism Paul prism is a type of reflection prism which can be used to alter the orientation of an image. Light enters the large face of the prism, then hits on the roof, by total internal reflection twice from the roof, the beam exits again through the large face. An image traveling through a porro prism is rotated by 180 but not inverted. Capacity: Material: optical glass, fused silica, sapphire. Dimension: 1-250 mm Dimension tolerance: +0/-0.1 mm Surface flatness: /10632.8 nm Surface quality: 10-5� Angular accuracy: 5 second Coating: uncoated, ar, hr, beamsplitter ect.
Hanzhong Brisun Optics Co., Ltd. Is the high High precision optical element manufacturer provides customized production of Various optical lenses, including spherical lens, cylindrical lens, optical window, mirror, prism, filter, metal base mirror and other high-precision optical elements. The base materials include various optical glass, fused quartz, calcium fluoride (CaF2), zinc selenide (ZnSe), germanium (GE), silicon (SI), sapphire, metal and other materials. And provide antireflective film, high reflection film, spectroscopic film, metal film and other optical coatings. Prism is an optical element that turns the light according to the specific angle between the outgoing light and the incident light. In the optical path, the prism can change the angle between the outgoing light and the incident light (such as 90 �°, 180 �°, etc.), offset the light and change the image direction. Prisms are widely used in laser research, laser optical system, optical imaging, machine vision, life science, biomedicine and other fields or products. Borisun optics can provide various prisms in stock standards, such as K9 standard precision right angle prism, K9 high precision right angle prism, UV fused quartz standard precision right angle prism, UV fused quartz high precision right angle prism, K9 pentagonal prism, K9 Dawei prism, K9 ridge prism, K9 angle reflector (K9 pyramid prism), UV fused quartz angle reflector (UV fused quartz pyramid prism), wedge prism, etc. While providing various prism standards, we can also provide you with prism customization services according to your actual needs, such as the change of prism size, the improvement of parameter indicators, the change of coating requirements, etc. Welcome your inquiry and we will serve you wholeheartedly Technical parameters: Material: optical glass, H-K9L (N-BK7), quartz Radius of curvature: ± 1mm - ± 50000mm ± 1% Outer circle: 3mm-500mm ± 0.1mm Center thickness tolerance: ± 0.05mm (we can process to ± 0.01mm with high precision) Center deviation: 3²(we can process to 30 ³with high precision) Surface accuracy:/ 8 (high precision, we can process to 1 / 10�») Surface quality: 60/40 (we can process to 10-5 with high precision) Effective caliber: 90% Coating: according to the customer requirements In addition, we have thousands of kinds of stock, such as quartz plano convex lens, quartz plano concave lens, quartz biconvex lens, quartz biconvex lens, cylindrical lens, prism, filters, windows, beamsplitter and so on. The price is preferential and the quality is excellent, which can meet your demand for a small order. If you are interested it, welcome to inquiry us or search "Hanzhong Borisun Optics Co.,Ltd "to know about more details.
The right angle prisms are often preferable to an inclined mirror in applications involving severe acoustic or inertial loads, because they are easier to mount, and deform much less than mirror in response to external mechanical stress. As long as acceptance angle limitations for TIR from the roof faces are not exceeded, the right angle prisms can serve as a retro reflector, turning beams back to the original direction.Right-angle prism is the most common type of prisms. It is used to re-direct a beam of light at 90 degrees from the the incident direction or used as a 180 beam retro-reflector. They are often coated with various optical coatings to form cubic beam splitters and color separation cubes used in various projection systems. Specifications: Material BK7, UVFS Dimensional tolerances ±0.01mm Clear aperture 95%@central area 90 angle tolerance ±2 arcmin (General type) ±5 arcsec (Precision type) Pyramidal tolerance ±1 arcmin (General type) ±30 arcsec (Precision type) Surface quality 40-20 S-D Surface flatness
Right angle prism is better than reflector in the strict acoustics system and inertia burthen. This is because the right angle prism is easier to install. And it is not easy to deformation in exterior machine pressure. The bevel used as the surface of total internal reflection, the incident plane and the exit facet plated ar film, so it can get very good transmittance. On the other hand, the bevel plated metalized films, so it can used to be external reflection. Used for routing a collimated beam of light through 90� or 180� via total internal reflection, depending on orientation. Also used for image rotation, for retro reflection, and as an external reflector. Capability Material: Bk7, grade a fine annealed z Dimension tolerance: +/-0.20mm Angle tolerance: +/-3' Surface quality: 60-40 s/d Flatness: Lambda/4 Coating: Upon request
Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.
Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.
Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3';
Material:H-K9L,H-BaK7,etc; Surface quality:40-20/20-10; Dimensional tolerance:0.05mm; Surface flatness:lambda/2; Angle tolerance:3'; Parallelism tolerance:3'.
