Find Verified Precision Steel Tube Used In Cylinder Suppliers, Manufacturers and Wholesalers

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder

Material
ASTM A53, A106, A210, A252, A333

Grade
Q195 SS330,ST37,ST42
Q235 SS400,S235JR
Q345 S355JR,SS500,ST52

Caustic soda pearls (also known as sodium hydroxide, caustic soda, NaOH, sodium hydrate, or Sodagrain) are white spheres of caustic soda with a barely perceptible odour. They are soluble in water, with the liberation of heat, and are stable under normal conditions.

For price and specifications please contact us.

Product Name Precision Steel Pipe
Standard DIN2391 EN10305-1 ASTMA179 ASTM A192 ASTM A519
Material SAE1010,SAE1020,#10,#20,#45,304,316
Outer diameter 8MM-50MM
Wall thickness 0.5-50.0MM
Length fixed(3-12m) or customized
Technology High precision Cold drawn/ Cold rolled
Heat treatment BK/BKS/NBK
Advantages
Short delivery time Quality assurance Competitive price

Product Name Precision Steel Pipe
Standard DIN2391 EN10305-1 ASTMA179 ASTM A192 ASTM A519
Material SAE1010,SAE1020,#10,#20,#45,304,316
Outer diameter 8MM-50MM
Wall thickness 0.5-50.0MM
Length fixed(3-12m) or customized
Technology High precision Cold drawn/ Cold rolled
Heat treatment BK/BKS/NBK
Advantages
Short delivery time Quality assurance Competitive price

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder

Waste Specification:
European Classification: E46
EWC Code: 19.01.02
Basel Code: B10 10

The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring.

Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.

Please feel free to contact us for further details

Advantages: thin-walled, high precision, small ovality, small allowance for processing.
Main standard: din2391, astm a519, en10305-1
Main materials: st45, 1020, e235, e255 (bao steel).
Delivery condition: bk.
Outer diameter: 50 to 116mm,
Wall thickness: 2 to 3mm,
Usage: automotive parts, engine cylinder sleeves, liners.




Bundled or wooden boxes packed

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.

Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.

We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.

The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.

Cast Iron and Ductile Iron tube and fittings PL739

Cast Iron and Ductile Iron tube and fittings can be offered by our comapny to meet different engineering needs.

The difference between ductile iron and gray iron

1. Different chemical composition

Nodular cast iron contains nodular graphite, which can improve its toughness and strength, while reducing brittleness. Gray cast iron contains a lot of carbon, so that its hardness and wear resistance is high, but the toughness is poor.

2. Different organizational structures

The structure of nodular cast iron contains nodular and ferrite, and the distribution of nodular is uniform. While the structure of gray cast iron is mainly ferrite and pearlite, and the distribution of pearlite is uneven.

3. Different performance

Ductile iron has high strength and toughness, and has good corrosion resistance. It is uitable for the manufacture of high load and high pressure parts. The hardness and wear resistance of gray cast iron are high. It is suitable for the manufacture of friction and wear parts.

Application field
Cast iron : because of its low strength and good vibration resistance. It is often used in the production of parts under compressive stress, such as box, base, etc.
Ductile iron : because of its high strength and good toughness. It is often used in the manufacture of parts requiring high strength and toughness, such as crankshaft, connecting rod and so on.

Galvanized GI Steel Rolls & Plates & Coils
Whatâ??s the difference between galvanized GI steel coils and plates?

I. Definition
Galvanized GI Steel coil and galvanized sheet are galvanized steel. The galvanized coil is a continuous hot dip galvanized coil in the production process. While galvanized sheet is a single hot dip galvanized sheet in the production process.

2. the production process
The production process of galvanized coil and galvanized sheet is different.

The production process of galvanized coil generally includes multiple processes such as coil heating, hot dip galvanizing and shearing into coil.

The galvanized sheet is generally the zinc alloy coating through the hot dip technology directly coated to the surface of the steel plate.

So the production process is relatively simple, the process difficulty is relatively low.

3. material thickness
The material thickness of galvanized coil and galvanized sheet is also slightly different.

Generally speaking, the thickness of galvanized coil is relatively thin. We mainly use it for the production of cold rolled, coating and other thin steel products.

The thickness of galvanized sheet is relatively thick. We mainly use it in the manufacture of glass fiber reinforced plastic, automotive panels, roof panels and other steel products requiring strength and corrosion resistance.

4. Advantages and Disadvantages
Both galvanized coil and galvanized sheet have their own advantages and disadvantages.

The production cycle of galvanized coil is short, the process is simple, and it is suitable for the production of low thickness and high precision steel products.

The galvanized sheet has the advantage of hardness, corrosion resistance, wear resistance and other multiple properties.

However, the production process of galvanized sheet is time-consuming and laborious, and the production cost is relatively high.

5. Application fields
The application areas of galvanized coil and galvanized sheet are also different.

Galvanized coil is usually used in the production of home appliances, building materials, auto parts, pipes and other high-demand steel products.

The galvanized sheet is mainly used in automobile manufacturing, construction engineering, petroleum, chemical and other industries.

In addition, because of the good corrosion resistance of galvanized sheet, it is also widely used in Marine engineering, railway, bridge and other fields.

We produce and sell steel pipes, carbon steel pipe, GI pipe, carbon steel pipe , SS pipes and Spiral steel pipe in long term.
Our factory have plenty of steel in stock and customers can find the right products.

GI pipe Q195, Q235, Q345,
Stainless Steel (SS pipe) 201, 304, 316, 316L
Seamless Pipe 42crmo, 20, 35, 45
OD Size 12mm, 20mm, 25mm, 40mm, 50mm, 10mm-600mm

Buyers please send us steel pipe specificationss on OD size, wall thickness, steel grades and quantity to quote cost.

Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.

Finishing Polished
Color Metalic Grey
Material Grade JIS

Material Stainless Steel
Outer Diameter 20-25mm

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder

This recertified Medical MD Oxygen Cylinder is perfect for professional or personal home oxygen use. With a 14.6 cu ft capacity,this medical oxygen cylinder is perfect for portability and smaller spaces. This lightweight, easy to transport aluminum requalified cylinder is DOT approved, and ready for medical or industrial use. It comes fitted with a CGA870 post valve installed and a freshly painted dome in a Medical Green color for easy identification.

PREMIUM CONSTRUCTION
Reconditioned
High-quality aluminum body
Clearcoat protected
Medical green rust-resistant painted dome
CGA870 medical post valve installed
Approximately 4.4â?³ in diameter x 16.3â?³ in height* (with valve)
Weighs approximately 6 pounds
Capacity 14.6 cubic foot
2015 PSI service / 3360 PSI test pressure
Stamped DOT-3AL2015
5-year retest interval
Recertified test within 180 days prior to shipment

We deals in the following products of India, China, Taiwan and Korea Origin:-
1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc)
2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc)
4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc)
5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless )
6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps.
7)Heavy Duty Props & Light Duty Props.
8)Nuts, Bolts, Nails & Fastners
9)System Scaffolding, Base Plate & Adjustable Base.
10)Steel Tie Rod, Waller Plates and Wing Nuts.
11)Drop Forged and Pressed Sheet Metal Couplers of all types.
12)Steel Billets, Steel Angle & Steel Channels.