120qnf6 ni-mh square power battery 1, high power density, long service life, cycle life is superior, 2, optimization design of air duct, uniform heat dissipation, high efficiency, high safety with protection against over- g shockproof ability; 3, battery system internal connection is persistent and reliable, low internal resistance, allows large current discharge; 4, single battery used the pp base material plastic , with good strength and high & low temperature resistance 5, using multiple patent design. Nominal voltage: 144v Nominal capacity: 6ah Weight:
Place of origin:cn;gua Brand name:ccne, oem Nominal capacity:1000ah Nominal voltage:2v Type:sealed rechargeable battery Size:474*175*328*366mm Certificate:ul, ce, iso Warranty:3 years Weight:62.0kg Brand:mca, ccne, oem Battery type:lead acid battery Battery case:abs Payment term:t/t, union etc Usage:stanby & cycle use, solar & wind Terminal:t5 Layout:i Based on 18-year experience in research and development, in 2008, we succeeded in designing nps batteries mainly suitable for solar / wind power or photovoltaic system and then we call nps batteries as pv batteries too. In fact, the use of agm batteries in deep cycle applications is short sighted because the agm batteries will fail prematurely indeed the agm battery capacity will start to reduce from the day of installation. With the great help of doctor yoshida masayoshi in toyama universityin japan, we combine gel technologies with deep cycle technologies by putting somespecial elements in lead alloy and some additive in electrolyte to get muchmore longer cycle life for nps batteries. Nps can be regarded as another type of special gel deep-cycle batteries. Voltage: 6v &12v capacity: 9ah to 3000ah Service life: battery floating service life can target 15 years at 20oc/68of to 25oc/77of General features Nonspillable Sealed and maintenance-free operation High quality and high reliability Exceptional deep discharge recovery Low self-discharge Long service life Solid copper terminals C&f technology (container formation for plates) Computer-aided design and manufacturing Ul, ce, vds approved Typical applications Telecommunication equipment Electronic instruments Ups systems Solar power system Wind power system
1) weight: 275â±5g 2) battery dimension: thickness: 18â±0.5mm; width: 68â±0.5mm; length:110.5â±0.5mm 3) nominal capacity: 10.0ah@1c 4) minimum capacity: 10.0ah@1c 5) specific energy: 116wh/kg 6) volumetric energy density: 237.7wh/l 7) specific power: 560w/kg 8) nominal voltage: 3.20v 9) charge cut-off voltage: 3.65â±0.05 v 10) discharge cut-off voltage: 2.50â±0.05 v 11) ac impedance: 1.30â±0.15mî© 20 1khz 50%soc 12) max. Continuous charge current: 10a1 13) max. Instantaneous charge current: 20a2c) 15s 14) max. Continuous discharge current: 10a1 15) max. Instantaneous discharge current: 50a515s 16) working temperature: charge050; discharge: -2060 17) storage temperature: -2045, 1 month; -1035, 6 months; 025, 12 months; 25%(soc, rh -
We have three models of products,such as BP72160\BP72205\BP72277.PRODUCT APPLICATION: Our products can be used for low-speed electric vehicles.Such as electric bicycle/motorcycle/tricycle/vehicle/golf cart.If customers have other specific needs for the product, we will offer diverse and customized services. WHY CHOOSE US? Fast charge and reduce investment on batteries Long cycle life High energy efficiency ( discharged energy/charged energy ) Complete environment-friendly, no emission Wide operation temperature range Higher energy density
Brand New Cordless Drill Battery for Dewalt DCB184 Type: Li-ion Volt: 18V Capacity: 5000mAh Color: Black Weight: 680g Dimension: 130 x 93.4 x 83mm
Brand New Cordless Drill Battery for Milwaukee M18B6 Type: Li-ion Volt: 18V Capacity: 6000mAh Color: Red Weight: 978g Dimension: 141.15 x 78.00 x 73.95mm
Brand New Cordless Drill Battery for Metabo 6.25594 Type: Li-ion Volt: 18V Capacity: 3000mAh Color: Black Weight: 669.15g Dimension: 123.05 x 80.35 x 67.00mm
Brand New Cordless Drill Battery for AEG B1820R Type: Ni-MH Volt: 18V Capacity: 3000mAh Color: Black Weight: 897g Dimension: 141.15 x 78.00 x 72.95mm
Brand New Cordless Drill Battery for Paslode 404400 Type: Ni-MH Volt: 6V Capacity: 3000mAh Color: Black Weight: 309.25g Dimension: 134.60 x 49.40 x 28.10mm
Brand New Cordless Drill Battery for Worx WA3551.1 Type: Li-ion Volt: 20V Capacity: 3000mAh Color: Black Weight: 440g Dimension: 109 x 75 x 47mm
3.2V 3300mAh, with more than 2000 times cyclelife size 26*65mm, weight 85g VCELL POWER CO.,LTD is the leading lithium battery manufacturer in china for over 10 years. Who mainly produce lithium ion battery, lithium polymer battery, and LiFePo4 battery.
Product Introduction About the battery powered transfer platform, it is an electric transfer cart with rails, which is the traditional and mature type transfer platform. More importantly, it has been new favorite in the industry transport field all over the world with hot market. Especially for the workshop transportation. Working Principle The battery is installed in the battery powered transfer platform. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the battery powered transfer platform to start, stop, go
Find professional manufacturers and suppliers of portable battery power supply in China here. Our factory offers portable battery power supply with competitive price.
Product description 1. Model: 9.6v 2/3a1400mah ni-mh high power rechargeable battery pack for airsoft gun (8s of fh-2/3a1400p). 2. Un, rohs, ce approved ni-mh battery pack. 3. Ni-mh battery pack oem orders are welcomed. 4. Ni-mh battery pack is widely used to consumer portable equipments, information devices, miner lamps, power tools, remote control toys, medical devices, vacuum cleaner, cordless phone, etc. 5. Bulk pack, blister card are available. 6. For ni-mh high power series 2/3a size other capacity are available from 900mah to 1600mah. 7. Customizes shapes, capacity, and voltage are accepted. 8. Individual cells can be assembled in parallel or series into stacks as required by customers. 9. No memory effect, high voltage, high energy density, long cycle life. 10. Eco-friendly. Cell:Ni-mh Model:8s of fh-2/3a1400p Nominal voltage:9.6v Nominal capacity:1400mah Minimal capacity:1300mah Charge current:Standard charge : 0.1c(140ma) Rapid charge : 0.5c(700ma) Charging time:Standard charge : 16.0 hours (ref.) Rapid charge : 2.4 hours (ref.) Continuous discharge current:10c (14a), discharge average voltage:1.13v per sigle cell Cut-off discharge voltage:6.4v Dimensions(t*w*l):Approx.: 18.5mm* 36mm * 122mm Weight:Approx. 200g Operating temperature:Charge : 0 ~ 45 ºc Discharge: -10 ~ 60 ºc Storage temperature:At -5 ~ 35 ºc recommend(25±5 ºc) Control required 1) -?v: 0 ~ 5mv 2) d t / d t: 0.8 ºc/ min 3) t co: 40 ~ 45 ºc NoteStorage capacity should be 40%~50% full charge capacity.
Product Introduction SANDI AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-750VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface (Optional)
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
TGB, TDB Serie VRLA / SLA Batteries AGM Batteries are maintenance free batteries used in general electrical equipment such as UPS, safety, alarm systems, emergency lighting and security systems. TGEL Series Deep Cycle VRLA / SLA Battery, Dry Battery, Maintenance Free With Nano Gel AGM Technology, Gels are more resistant to Gel and M, better Disc Disc Discharge and can be used well. The light that flows is very small, suitable for receiving energy such as solar cell solar cells or wind turbines.
1.Cycle life(times) 80dod©‡¡ý3000 70dod©‡¡ý5000 2.Temperature durability of case ¡ü 200¡æ; 3.Operating temperature charge/discharge From -45¡æ to +85 4.Self discharge rate ¡ü3% (monthly) 5.Standard charge/dischare current0.5ca 6.Max charge cureent Constant curren Impulse current 7.Max discharge current Constant Impulse Current Current 8.Recyclable recycling 9.Shortly charge, solar and windturbine , ac/dc can be charged 10.Environmental protection customersized
Model: PB-BB8520/9300 Voltage: 3.7V Capacity: 2000mAh Cell: Li-ion Input Voltage: DC 5-5.5V Input Current Max: 1.8A Output Voltage: DC 5-5.3V Output Current Max: 1.2A. Dimensions.
1). NiMH D 8000mAh 4.8V 2). High energy density 3). Low self-discharge 4). Long service life 5). Chargeable up to 500 or 1000 times 6). Excellent performance of high rate charge and discharge 7). Low internal resistance Diameter:32.5+/-0.5mm Height:59.5+/-0.5mm
