1)size: D1.5mxL3.0m 2) Initial pneumatic pressure:0.05Mpa 3) Weight:380kg(body only) 4) Reaction Force:579KN 5)Energy Absorption: 153KJ 6)Molded production 7)Service life: 10-20years 8)Every piece is inspected to exceed ISO standards
EVA foam filled fender is a kind of constructive fender with polyurethane materials as its outer protective layer and polyethylene or plastic foam core forming the resilient inner part. Through comoressive deformation to absorb impacting energy of the ship when using. So that it can reduce destructive effect to the pier and the ship.
Hydraulic hoses & couplings Hydraulic pumps, fittings, cylinders & filters Manifolds & accessories Pneumatic cylinders, filters & regulators Pneumatic fittings & pipes Pneumatic valves: mechanical, proportional & manual Boosters & regulators
Labour Delivery Bed Pneumatic Product Code: MEF720 Description Movement: Trendelenburg 30 degree max Reverse Trendelenburg: 30 degree max Lateral Tilt: 15 degree Max Height Adjustment: 60 to 110cm Body Section: 60 cm (min) width (w/o arm board) 1000 cm (min) Length ( pelvis to head) Leg Section 60cm (W) 70 cm (L) table top material: gauge 20 stainless steel hydraulically operated with standard accessories: heel holders, shoulder rests side frame, mattress waste receptacle can and hose, supplementary table, funnel built-in IV pole with holder; provided with 4 caster with brake, padded stirrup
Micro silica (silica fume), silica, fly ash, pozzolano, ggbfs and white cement, other cementatious materials and factory/plants specialized spare parts & equipments, automation & switchgear, drives & transmission spares, instrumentation & pump, pneumatic & hydraulic spares, valves & actuators, mechanical parts, high carbon ferro chrome, foundry pig iron, iron ore concentrate, chromite ore, antimony ore, silicon metal 441 (powder), ferro silicon (fesi), iron ore pellet, copper concentrate.
Cylindrical Rubber Fenders are simple to install and operate which makes these units an economical solution for remote locations and for multi user berths where vessel types cannot always be predicted. Cylindrical type rubber fender has low reaction force,little surface pressure,reasonable energy absorb. The HGTï¼?www.hgtmarine.comï¼? Cylindrical Fender was the first rubber fender type to be produced with a defined performance. Installation is simple by using chains, bars, ropes or specially designed ladder brackets, depending on the fender size and substructure. The Cylindrical Fenders' proportional increase of reaction force and energy absorption all the way to the rated deflection is an advantage resulting in softer berthing.
The HGT Cone Fender is an efficient rubber fender type that is used in various applications. It has a conical body and fully rubber-embedded mounting flanges. Its refined geometry and conical shape result in a number of outstanding performance characteristics.
Pneumatic Electric Skateboard Tire Factory Direct Sale Wear-resistant Skidproof Thickened and Comfortable 10x3 Pneumatic Tyre Product name 10*3 outer tyre Tyre size 10 inches Tyre type Pneumatic tyre Main material Natural Rubber Net Weight 645g Usage For e-bike or electric scooter wheel parts Color Black MOQ 1 Pcs Place of Origin Hebei Province, China
Yokohama fender, Pneumatic fender, Foam fender, Marine oil hose, Oil pipeline, Marine ropes, Anchor chain, Rubber fender..
It is currently the most widely used rope for daily use and industrial application. The production process is the simplest and the cost is low. It has the advantages of high strength, low elongation, abrasion resistance, corrosion resistance, softness and smoothness, and easy operation. At the same time, special ropes such as anti-static can be made. 4MM-160MM, 3/8/12 strand,double braid, length standard 200 meters / 220 meters, can be produced according to customer requirements.
It is currently the most widely used rope for daily use and industrial application. The production process is the simplest and the cost is low. It has the advantages of high strength, low elongation, abrasion resistance, corrosion resistance, softness and smoothness, and easy operation. At the same time, special ropes such as anti-static can be made. 4MM-160MM, 3/8/12 strand,double braid, length standard 200 meters / 220 meters, can be produced according to customer requirements.
The anchor chain is a steel chain connecting the hull and the anchor. The main functions of the anchor chain are: connecting the anchor and the ship, transferring the anchor holding force to the hull; when anchoring, the thrown anchor chain has a certain weight, which can buffer the wind and other external forces on the ship in the water; the force of the anchor chain on the anchor in the flat underwater part can maintain the level, which is conducive to the reliable bottom holding of the anchor. At the same time, this part of the anchor chain is blocked by the soil, which can also provide part of the anchoring force.
Floating oil and marine hoses are designed and produced in full accordance to OCIMF standards. These porducts are also subjected to manufacturing and testing requirements dictated by ISO9000:2001 quality standards.
Couplings, gearbox, valves, pumps, bearings, conveyor systems, pipes & fittings, automation drives electrical items, rtd, cables, switchgears, transformers, measuring instruments, drilling machines. ball valves, gate valves, globe valves, butterfly valves, diaphragm valves, waffle valves, sluice valves, hydraulic valves, pneumatic valves, solenoid valves, bellow seal valves, check valves in stainless steel, ss 304, ss 316, brass, m.s, cast iron, cast steel, pvc, nylon, teflon, ceramic lining valves. fittings: flanges, elbows, tee, couplers, nipples. bearings, v belts, couplings: gear couplings, pin bush couplings,pulleys.Export, clearance, door delivery, import, automations, maintenance, retro fitting, installations
10x2 puncture resistant electric scooter rubber tires electric bike wheel parts for adults Name Scooter rubber tire Material Natural rubber Type 10*2 Pneumatic tyre Outer diameter 25.5 cm Inner diameter 15.6 cm Tyre tread width 4.8 cm Usage For e-bike or e-scooter
Fish seafood grading sorting weighting machine,Parameters Exclusion method Pneumatic swing arm Working height 800mm �?�±50mm working voltage AC220V 50HZ Total rated power of sorting machine 1kw/hour Delivery direction Facing the operation interface from left to right working temperature From -20 C to 40 C Scale size 630MM (optional size according to the divided object) Shaving and discharging direction customization.
Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process. Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products. Parameters 1.process arrange diameter of round shape onion 30-150mm. 2.capacity 1000-1500kg/h 3.Power 3kw 4.Voltage 380V 5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw 6.Machine size 1.5*1.3*1.4m 7.Weight 420kg Start working flowing: 1.Fill onion in the loading box 2.Start the pneumatic valve switch 3.Start the power-supply switch 4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin 5.When finished adjusting ,The equipment operates normally and automatically.
POL: Yokohama port Mix natural and color on bales At least 150tons per month 18-20mt per 40'HC Place of Origin: : JAPAN, US, EUROPE Unit : Ton/Tons Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin: Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales
FOB Tokyo/Yokohama Quantity ~22 tons Place of Origin: : JAPAN, US, EUROPE Unit : Ton/Tons Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin: Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bales
EXW Yokohama Port LDPE natural regrind blow moulding type Japan original. Loading 20-24tons. Quantity 10tons/month. Place of Origin: : JAPAN, US, EUROPE Unit : Ton/Tons Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin: Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Jumbo Bags
