Pneumatic Fender Inflatable Rubber Bumper Suppliers and Manufacturers

Features: 1) High temperature resistance-low temperature flexibility 2) Wear and tear endurance 3) Acid and alkali resistance 4) Customers' samples and drawings are available

Hardness-60ShoreA Sizes : OD-63,ID-23X 129mm Size-80X ID-100mm Size-64.5X ID-100mm With Metal Rings

We are manufacturer of rubber and silicone products in shenzhen city of china, which can produce rubber absorbers, rubber vibration absorbers, rubber bumper feet, rubber feet, rubber damper etc according to the detail drawing, design or sample. Product name:rubber absorber, rubber bumper feet Material:rubber(sbr, nbr, cr, epdm) and metal part(nut, screw etc) Size:according to the drawing, design or sample that you have Colour:any Hardness:any Moq:5000pcs Packaging:inner plastic bag and outer carton packed We are manufacturer of rubber and silicone products in shenzhen city of china, which can produce rubber absorbers, rubber vibration absorbers, rubber bumper feet, rubber feet, rubber damper etc according to the detail drawing, design or sample. Product name:rubber absorber, rubber bumper feet Material:rubber(sbr, nbr, cr, epdm) and metal part(nut, screw etc) Size:according to the drawing, design or sample that you have Colour:any Hardness:any Moq:5000pcs Packaging:inner plastic bag and outer carton packed

Rubber DD Fenders and DO Fenders.

Rubber fender

Rubber fender We manufacturer rubber fender, rubber buoys & navigational aids. We are one of the indias largest rubber fender manufacturers.

we manufacture and supply all kinds of rubber fenders used for all kinds of applications.

Sizes: Diameter rangeï¼?500mm~4500mm Length range:1000mm~12000mm Weight: 30kg~3800kg Work pressure: 50kPa/80kPa Material: Natural rubber Material of metal parts: Galvanized steel Types: Sling type,Chain&Tyre net type,Hydro pneumatic fender Certification: ISO 17357ã??BVã??CCSã??ABSã??LR Warrenty: 12 months Lead Time: Within 20 Working Days

TUF Marine pneumatic floating Yokohama fender provides intensive and long-term protection for ships, harbor crafts, docks, piers, and wharfs. TUF Yokohama fenders comply with ISO 17357 and PIANC Guidelines for the design of fender systems. And they are manufactured with the features as follows. The energy absorption does not decrease at inclined compression up to 15 degrees. The reaction force increases slowly and does not increase sharply even under excess load conditions. TUF Marine Pneumatic Yokohama Fender is adequately reinforced using strong tire cord against the combined force during ship berthing and mooring operations. The weight of pneumatic fenders are supported by water on which it floats, making simple installation possible on the wharf and anchor mast. Available in a variety of sizes. IACS Approvals: CCS, ABS, BV, LR, KR, DNV-GL, NK, RMRS and RINA.

Application Marine Material Natural Shape DO Type &DD Type Color Black We are manufacturer of Dock Bumpers in Natural rubber as per customer required size. There are two type of Dock Bumpers available with us one is DO Type & other is DD Type as per customer requirement. Our standard size as follows DO Type : 75 mm width x 75 mm width with 25 mm Round Hole 100 mm width x 100 mm width with 50 mm Round Hole 150 mm width x 150 mm width with 75 mm Round Hole DD Type : 75 mm width x 75 mm width x D Shape Hole of 25 mm width x 25 mm Height. 100 mm width x 100 mm width x D Shape Hole of 50 mm width x 50 mm Height. 150 mm width x 150 mm width x D Shape Hole of 75 mm width x 75 mm Height.

Rubber dock bumper Rubber dock bumper is used in harbour port walls to avoid jetty's from damaging the wall of boats. We also produce other rubber bumpers which are used to protect doors, walls, rails, docks, truck bumpers, utility trailers, carts, fork lifts, curbs, rollers, sliders, packers, pushers, conveyors, braces, corners and other places where metal to surface contact is harsh and continuous. Made with high tensile, abrasion-resistant rubber compounds in molded and extruded shapes and styles. Most commonly used where metal meets metal or concrete. Used extensively on commercial and animal trailers, delivery vehicles, tow trucks, etc. Material: nr, sbr, epdm or reclaimed rubber.

Features of pneumatic marine fender (1) High energy absorption The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Fenders use compressed air as the buffer medium to absorb ship impact energy and have good elasticity. (2) Ultra low back pressure The inside air of pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure. (3) Inclined contact, good adaptability Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of pneumatic fender, its adaptability is much higher than other fender. (4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level Pneumatic marine fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving. (5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust. (6)Florescence pneumatic marine fenders install easily and widely used in a variety of ships, large dock and a large variety of tidal dock. Application of pneumatic marine fender Pneumatic marine fenders are suitable for many applications including: *Tankers, Gas Carriers and Bulk Cargo Ships; *Fast ferries and aluminum hulled vessels; *Temporary of permanent installations; *Rapid response and emergency fendering; *As stand-off fenders to realign ships with shore facilities.

Features of pneumatic marine fender (1) High energy absorption The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Fenders use compressed air as the buffer medium to absorb ship impact energy and have good elasticity. (2) Ultra low back pressure The inside air of pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure. (3) Inclined contact, good adaptability Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of pneumatic fender, its adaptability is much higher than other fender. (4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level Pneumatic marine fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving. (5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust. (6)Florescence pneumatic marine fenders install easily and widely used in a variety of ships, large dock and a large variety of tidal dock. Application of pneumatic marine fender Pneumatic marine fenders are suitable for many applications including: *Tankers, Gas Carriers and Bulk Cargo Ships; *Fast ferries and aluminum hulled vessels; *Temporary of permanent installations; *Rapid response and emergency fendering; *As stand-off fenders to realign ships with shore facilities.

Cylindrical Rubber Fenders are simple to install and operate which makes these units an economical solution for remote locations and for multi user berths where vessel types cannot always be predicted. Cylindrical type rubber fender has low reaction force,little surface pressure,reasonable energy absorb. The HGTï¼?www.hgtmarine.comï¼? Cylindrical Fender was the first rubber fender type to be produced with a defined performance. Installation is simple by using chains, bars, ropes or specially designed ladder brackets, depending on the fender size and substructure. The Cylindrical Fenders' proportional increase of reaction force and energy absorption all the way to the rated deflection is an advantage resulting in softer berthing.

We are among the leading names in the industry offering an extensive range of Rubber Fenders that are durable in nature and have high strength. They are durable in nature and have smooth finishing standards. We are supported by advanced manufacturing unit that is outfitted with latest technologies thereby delivering world-class range of products. Available Fender : Super Cell Fender, Cone Fender, Cylindrical Fender, Square Fenders, D Type Fenders, Arch Fender, M Type Fender, Key Hole Fender, W Fender, Pre Curved Fender Features: Excellent construction Long lasting Superb measurement

JIER Arch Rubber Fenders have been optimized for increased energy absorption, providing reliable and trouble free service for a wide variety of berths even under the most severe conditions. They are being widely used in port facility due to their high energy absorption and low reaction force and stable performance as well as high durability following simple structure. They are particularly useful for vessels with high allowable hull pressures and for locations where mounting space is limited. A variety of sizes and lengths are offered. JDA150X1000 ~JDA1000x2000

Jier cone rubber fender is the result of continuous product development. This fender design is based on the cell fender which was introduced to world-wide markets more than 25 years ago. This type of fender can be considered as the latest in state-of-the-art moulded fender products. Jco500~jco1800