Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
We have top quality drained acid car batteries scrap for sale at desirable quantities and at very good negotiable prices. We ship to all destinations. contact now with your email address so that we can send you more details directly. Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
We have top quality drained acid car batteries scrap for sale at desirable quantities and at very good negotiable prices. We ship to all destinations. contact now with your email address so that we can send you more details directly. Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
Salient Features Highly efficient 3-phase water filled motor - Easily rewindable - Dynamically balanced design - Extended life with flawless performance - Thrust bearing : Carbon + S.S. material for High thrust load capacity - 100% EC grade copper winding - Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps. - Zero maintenance - Superior performance - Sand proof operation - Highly efficient 3-phase water filled motor Product Specification Power Range : 1.0 HP to 20.0 HP Operating Speed : 0 - 2890 RPM Operating Frequency : 0 - 50 Hz Input Solar DC Power Range : 900 Wp, 20000 Wp Input Solar DC Voltage Range : 110 Vmp - 600 Vmp Head Range : 30 Mtr , 220 Mtr Discharge Range : 10000 LPD - 420000 LPD Type of Duty : S1 material of construction - motor Part Grade Body Lock : Spring Steel Stud Ring : M.S. (Zinc Coated) Stator Stamping : CRNGO - M45 Silicon Winding Wire : 100% EC Copper Shaft : SS-420 Rotor Stamping : CRNGO - M45 Silicon Copper Lamination : 100% EC Copper Upper Housing : SS-304 Lower Housing : SS-304 Connection Piece : SS-304 Oil Seal : NBR TB Set : Carbon + SS Base : SS-304 Drain Plug : Brass Couple Sleeve : Stainless Steel Water Bolt : Brass MATERIAL OF CONSTRUCTION PUMP Part Grade Suction : SS-304 Couple : Stainless Steel Couple Counter : SS-304 Rubber Seal : NBR Bush Seal Cover : SS-304 Bowl : SS-304 Impeller : SS-304 Key : SS-410 Bowl Bush : NBR Bush : LTB-4 Middle : SS-304 Cap : NBR Outlet : SS-304
GOSLING LIBERTYZENO Mens Kiltie Monk Strap Double Buckle Dress Shoes Genuine Leather Business Slip-On Loafers Color : Black * Made of choicest hand-picked and finest GENUINE LEATHER for long-lasting durability. * RUBBER SOLE for SAFEST GRIP and no compromise in GRIP SAFETY ASSURANCE. 1 Inch HEEL makes sure that ANKLE is on proper REST POSITION with a combination of * ADDED FOOTBED inside the shoe for COMFORTABLE STEPS. * DOUBLE MONK STRAP with CAP TOE is the signature of EXOTIC collection of Craftsmanship and sets a STYLE STATEMENT of promising factor. * The best choice to wear if your going for the PARTY or any SPECIAL OCCASION, wear it and get ready to collect the compliments
Item No.: 3002-02 Pu/rubber Size : 36 - 47 (5-13) Soles : 3002- PU Rubber SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Gents Safety Boots Standard : S3 Sizes : 36 - 47 (5-13) Colors : Brown/black AVAILABLE OPTIONS Product Number : 3002-02 PU/Rubber Standard : S1,s1p,s2,s3 Toe: Fibre Glass/steel Midsole: Steel/kevlar Sole : DD PU/Rubber Color: Brown & Black MATERIALS Upper: Water Resistant Buff Printed Leather Lining: Camberella - 100% Camberella Polymide,breathable,absorbing And Relaxing Moisture Toe : Fibre Glass Midsole : Kevlar Footbed / Socks: Moulded Antistatic Sole : 3002- PU Rubber Certified : EN ISO 20345:2011 SRA BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: 9150-01 Size: 39-46 (5-12) Soles: 9150 Nitrile Rubber ADDITIONAL PRODUCT INFO OVERVIEW Product Name: Military Boot Standard : S1 Sizes: 39-46 (5-12) Colors: Black AVAILABLE OPTIONS Product Number: 9150-01 Sole: Nitrile Rubber Sole Color: Black MATERIALS Upper: Water Repellant Printed Leather Footbed / Socks: Padded Antistatic Sole : 9150 Nitrile Rubber Certified : NA BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 3002-02 Size : 36 - 47 (5-13) Soles : 3002 Double Density PU /Rubber SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Gents Safety Boot Standard : S3 Sizes : 36 - 47 (5-13) Colors : Brown AVAILABLE OPTIONS Product Number : 3002-02 Standard : S1, S1P, S2, S3 Toe : Steel /Fibre Glass Midsole : Steel/Metal Free Sole : Dual Color : Black / Brown MATERIALS Upper : Buff Barton Printed Din Leather +PU Coated Synthetic on Collar and Tongue Lining : Cambrella Toe : Fibre Glass Toe Midsole : Kevlar Footbed / Socks : Moulded Antistatic Sole : 3002 Double Density PU /RUBBER Certified : EN ISO 20345:2011 SRA BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 7198-398 NR Size : 36 - 48 Soles : 7198 Nitrile Rubber SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Breathable Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S3 Sra Sizes : 36 - 48 Colors : Black / Brown AVAILABLE OPTIONS Product Number : 7198 - 398 Nr Standard : S1, S1P, S2, S3 Toe : Steel Midsole : Steel Sole : Single Color : Black / Brown MATERIALS Upper : Buff Barton Lining : Textile Toe : Steel Midsole : Steel Footbed / Socks : Moulded Antistatic Sole : Single Density Nitrile Rubber Certified : EN ISO 20345:2011 BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 9150-01 Size : 39 - 48 (5-14) Soles : 9150 Nitrile Rubber SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Excellent Shock Absorber Fine Leather Light Weight Slip Resistant Sole Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Boot Standard : S1 Sizes : 39 - 48 (5-14) AVAILABLE OPTIONS PRODUCT NUMBER: 9150-01 Standard : S1, S1p, S2, S3 Toe : Steel Midsole : Steel Color : Black / Brown MATERIALS Upper : Water Resistant Printed Leather Toe : Steel Midsole : Steel Footbed / Socks : Cambrella and EVA. Antistatic Sole : 9150 Nitrile Rubber Certified : N/A BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No .: 7198-01 NR Size : 39 - 48 (5-14) Soles : 7198 Nitrile Rubber SAFETY FEATURES Abrasion Resistant Acid Resistant Anti Static Insole Breathable Excellent Shock Absorber Fine Leather Light Weight Oil Resistant Slip Resistant Sole Steel toe / Kavlar Steel Toe Cap ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Safety Shoe Standard : S3 SRA Sizes : 39 - 48 (5-14) Colors : Black AVAILABLE OPTIONS Product Number : 7198-01 Nr Standard : S1, S1p, S2, S3 Toe : Steel Midsole : Steel Color : Black / Brown MATERIALS Upper : Buff Barton Lining : Cambrella Toe : Steel Midsole : Steel Footbed / Socks : Moulded Antistatic Sole : Single Density Nitrile Rubber Certified : N/A BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No : Neptune Orange Size : 39 - 46 Soles : 3004 DDPU / PU Rubber Additional Product Info Overview Product Name : Neptune Orange Standard : S1P Sizes : 39 - 46 Available Options Product Number : Neptune Orange Materials Upper : Buff Nubuck Lining : 1956 Orange TOE : Fibre Glass / Steel Midsole : Kevlar Footbed / Socks: Padded Antistatic Socks Sole : 3004 DDPU / PU Rubber CERTIFIED: Boot Care * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% Comfort Guaranteed * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No : Jupiter Size : 39 - 46 Soles : 3004 DDPU / PU Rubber Additional Product Info Overview Product Name : Jupiter Standard : S1P Sizes : 39 - 46 Available Options Product Number : Jupiter Materials Upper : Fibre Lining: Rice Knit TOE : Fibre Glass / Steel Midsole : Kevlar Footbed / Socks: Padded Antistatic Socks Sole : 3004 DDPU / PU Rubber Boot Care * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. * Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% Comfort Guaranteed * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: Saturn Size : 39 - 46 Soles : 3004 DDPU / PU Rubber Additional Product Info Overview Product Name : Saturn Standard : S1P Sizes : 39 - 46 Available Options Product Number: Saturn Materials Upper : Buff Split Suede Lining : Spacer Mesh TOE : Fibre Glass / Steel Midsole : Kevlar Footbed / Socks: Padded Antistatic Socks Sole : 3004 DDPU / PU Rubber Boot Care * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% Comfort Guaranteed * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: Uranus Size : 39-46 Soles : 3004 DDPU / PU Rubber Additional Product Info Overview Product Name : Uranus Standard : S1P Sizes : 39 - 46 Available Options Product Number: Uranus Materials Upper : Buff Nubuck Lining : Spacer Mesh TOE : Fibre Glass / Steel Midsole : Kevlar Footbed / Socks: Padded Antistatic Socks Sole : 3004 DDPU / PU Rubber CERTIFIED: Boot Care * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. * NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. * Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% Comfort Guaranteed * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: Uranus Size : 39 - 46 Soles : 3004 DDPU / PU Rubber ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Uranus Standard : S1P Sizes : 39 - 46 Available Options Product Number : Uranus Materials Upper : Buff Split Suede Lining : Spacer Mesh Toe: Fibre Glass / Steel Mid Sole : Kevlar Footbed / Socks: Padded Antistatic Socks Sole : 3004 DDPU / PU Rubber Boot Care * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 00% Comfort Guaranteed * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: Orion Size : 39-46 Soles : 3004 DDPU/ PU Rubber Additional Product Info Overview Product Name : Orion Standard : S1P Sizes : 39 - 46 AVAILABLE OPTIONS Product Number : Orion Materials Upper : Fabric + Helker Lining : Dryttex Green Toe : Fibre Glass / Steel Mid Sole : No Footbed / Socks: Moulded Sole : 3004 DDPU/ PU Rubber Boot Care * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. * Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% Comfort Guaranteed * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. *Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: Cygnus Size : 39-46 Soles : 3004 DDPU / PU Rubber ADDITIONAL PRODUCT INFO OVERVIEW Product Name : Cygnus Standard : S1P Sizes : 39-46 AVAILABLE OPTIONS Product Number : Cygnus Materials Upper : KPU Lining: 1956 Toe : Fibre Glass / Steel Midsole: Kevlar Footbed / Socks: Moulded Sole : 3004 DDPU / PU Rubber Certified: Boot Care * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% Comfort Guaranteed * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions
Item No.: Pluto Size : 39-46 Soles : 3004 DDPU / PU Rubber OVERVIEW Product Name : Pluto Standard : S1P Sizes : 39-46 AVAILABLE OPTIONS PRODUCT NUMBER : PLUTO MATERIALS Upper : Red & Black Cloth Lining : 1956 Red Toe : Fibre Glass / Steel Midsole : Kevlar Footbed / Socks: Moulded Sole : 3004 DDPU / PU Rubber CERTIFIED: BOOT CARE * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. * Cushioned Insoles providing better comfort. * Shock absorbing PU midsole with low density providing uniform cushioning and comfort. * Light Weight PU for a featherlite feel even during high stress working conditions.
Item No.: Neptune Red Size: 39-46 Soles: 3004 DDPU / PU Rubber OVERVIEW Product Name : Neptune Red Standard : S1P Sizes : 39-46 AVAILABLE OPTIONS Product Number : Neptune Red Materials Upper : Buff Nubuck Lining : 1956 Red Toe: Fibre Glass / Steel MIDSole: Kevlar Footbed / Socks: Padded Antistatic Socks SOLE : 3004 DDPU / PU Rubber CERTIFIED: Boot Care * Clean your footwear regularly using high quality products that are suitable for the cleaning purpose. NEVER use caustic or corrosive cleaning agents. * When footwear is not in use clean the sole and store in a well-ventilated area. Never store the footwear underneath heavy items or in contact with sharp objects. If the footwear is wet allow it to dry slowly and naturally away from direct heat sources before storage. * To put on and take off footwear always fully undo fastening systems. Use a shoe horn to wear shoes. Only wear footwear of a suitable size. Products which are either too loose or too tight will restrict movement and will not provide optimum levels of protection and comfort. * The shoe should be used for the purpose for which it has been designed. Some facts about feet- * Most of the muscles are in your feet. Thus you should wear comfortable shoes. * The body temperature is regulated through your feet * Maximum number of nerves go through your feet. 100% COMFORT GUARANTEED * Quality leather upper and high quality breathable lining materials are used for proper air circulation in shoe for keeping the feet cool and odour free. * Construction of lasts based on extensive survey enabling the lasts/shoes to be manufactured for better fit providing maximum comfort. * Wider Steel and Ultra light Weight Composite Toe caps which provides more room for finger movements enhancing comfort. Cushioned Insoles providing better comfort. Shock absorbing PU midsole with low density providing uniform cushioning and comfort. Light Weight PU for a featherlite feel even during high stress working conditions.
