Orthopedic Splint Suppliers and Manufacturers

Medical devices, orthopedic splints.

Orthopedic Splints, Braces and Supports..

Used for diagnosis and relief of symptoms of plantar faciitis. Lot size - 100 units Wt - 16 pounds 24" x 20" x 14".

Currently on offer hip and knee medical implants. The product come from the warehouse stocks after bankrupt French factory Aston Medical. EU products of the highest quality, with certificates. This is a single lot, containing 11098 pcs, market value $3 million Below the link to the auction where we offering this lot. Detailed list and more photos on request.

Tomato Casting Tape (FIberglass or Polyester) Size : 1inch~7inch Width Length :1.8m~3.6m Self Production for raw material, like pu resin and fiberglass fabric

Orthopedic casting tape, surgical tape, fixing bandage, orthopedic splint.

Thumb wrist joint splint (tubular type) AJY-S06 For the first metacarpophalangeal joint, interphalangeal joint and acute arthritis, wrist sprain, synovitis, carpal navicular fracture fixation. 325*185*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy

Material: fiberglass and water-activated polyurethane. Application area: mainly used for the external fixation of fracture and common orthopedics. Model No.: AX002 (5cm*360cm) Size: standard or customized Package: 10bags*12boxes/ctn Characteristics: 1. High Strength and Light Weight. 2. Quick Solidifying and Good Mouldability. 3. Easy Operating. 4. Excellent X-ray Radiolucency. 5. Good Air-permeability. 6. Water-resistant. 7. Environment Friendly Materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.120kg

Material: fiberglass Application area: mainly used for the external fixation of fracture and common orthopedics. Model no.: ax005 (12.5cm*360cm) Size: standard or customized Package: 10bags*9boxes/ctn Characteristics: 1. High strength and light weight. 2. Quick solidifying and good mouldability. 3. Easy operating. 4. Excellent x-ray radiolucency. 5. Good air-permeability. 6. Water-resistant. 7. Environment friendly materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.280kg

Orthopedic medical devices (splints and supports).

Medical orthopedic casting tape and splint.

Description of orthopedic casting tape: It is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It is used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint. It is the upgraded and replaced product of the traditional plaster bandage.Age. Advantages of orthopedic casting tape: High strength, light weight molding fast Good air permeability Excellent x-ray radiolucency Waterproof Environmentally friendly Simple operation Operation of medical disposable casting tape: 1. Wear the surgical gloves and choose the proper specifications. 2. Put the cast padding or stockinet on the fixed part. 3. Open the package and take out the cast, immerse the cast in room temperature water at 3-5 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally on injured parts with 2~3 layers, overlapping the previous layer by one-half or two- thirds the width of the roll. 5. Shape according to the need, smooth and rub the surface to achieve good contact between layers. 6. Use the electric cast saw to cut and remove it. Certificates of orthopedic casting tape: ce & fda Package:oem service is available Storage & warranty: Be careful not to break the packaging Storage at room temperature Shelf-lift: 2 years Shipping: within 15 working days after payment Exhibition: Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products, such as fiberglass casting tape, splint , also supply cast padding, stockinette, elastic bandage, crepe bandage, cohesive bandage, gloves and electric cast saw

Hot sale orthopedic cast bandage colorful casting tapes orthopedic surgery cast tape Description of orthopedic casting tape: It is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It is used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint. It is the upgraded and replaced product of the traditional plaster bandage.Age. Advantages of orthopedic casting tape: high strength, light weight molding fast good air permeability excellent x-ray radiolucency waterproof environmentally friendly simple operation Operation of medical disposable casting tape: 1. Wear the surgical gloves and choose the proper specifications. 2. Put the cast padding or stockinet on the fixed part. 3. Open the package and take out the cast, immerse the cast in room temperature water at 3-5 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally on injured parts with 2~3 layers, overlapping the previous layer by one-half or two- thirds the width of the roll. 5. Shape according to the need, smooth and rub the surface to achieve good contact between layers. 6. Use the electric cast saw to cut and remove it. Certificates of orthopedic casting tape: ce & fda Package:oem service is available Storage & warranty: Be careful not to break the packaging Storage at room temperature Shelf-lift: 2 years Shipping: within 15 working days after payment Exhibition: Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products, such as fiberglass casting tape, splint , also supply cast padding, stockinette, elastic bandage, crepe bandage, cohesive bandage, gloves and electric cast saw.

Material: fiberglass and water-activated polyurethane. Application area: mainly used for the external fixation of fracture and common orthopedics. Model No.: AX003 (7.5cm*360cm) Size: standard or customized Package: 10bags*12boxes/ctn Characteristics: 1. High Strength and Light Weight. 2. Quick Solidifying and Good Mouldability. 3. Easy Operating. 4. Excellent X-ray Radiolucency. 5. Good Air-permeability. 6. Water-resistant. 7. Environment Friendly Materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.142kg

Material: fiberglass and water-activated polyurethane. Application area: mainly used for the external fixation of fracture and common orthopedics. Model No.: AX006 (15cm*360cm) Size: standard or customized Package: 10bags*9boxes/ctn Characteristics: 1. High Strength and Light Weight. 2. Quick Solidifying and Good Mouldability. 3. Easy Operating. 4. Excellent X-ray Radiolucency. 5. Good Air-permeability. 6. Water-resistant. 7. Environment Friendly Materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.298kg

Orthopedic synthetic casting tape & synthetic splint.

Introduction Our orthopedic casting tape is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It's used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint. It's the upgraded and replaced product of the traditional plaster bandage. Our Advantages 18 years profesional manufacturer of Medical Orthopedic Fiberglass CastingTape FDA CE Certfication OEM your size and packing Various Colors for Choose 7-15 Working Days for Delivery Free Samples Offered for Test Features High Strength, Light Weight Molding Fast Good Air Permeability Excellent X-ray Radiolucency Waterproof Environmentally Friendly Simple Operation Size: AX002 5cm 360cm AX003 7.5cm 360cm AX004 10cm 360cm AX005 12.5cm 360cm AX006 15cm 360cm Storage Warranty: Be careful not to break the packaging Storage at room temperature Shelf-life: 2 years Shipping: within 15 working days after payment Certificates : CE FDA About us Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products: such as Orthopedic Fiberglass Casting Tape, Splint, also supply cast padding, stockinette, elastic bandage, crepe bandage,cohesive bandage, gloves and electric cast saw.