Orthopedic Casting Tape(Fiberglass Cast) Suppliers and Manufacturers

***Medical Fiberglass Polyester Casting Tape*** Advantage: 18years professional manufacturer in orthopedic products: - CE FDA certified; -Shortest lead time: 7-15 working days; -OEM Package available; -Good Quality, Excellent Service and Competitive Price -Free Samples Offered for Your Test Product Description: Ansen Orthopedic Casting Tape is made of knitted fibreglass or polyester fabric, impregnated with water activated polyurethane resin. It is used for orthopedic illness or fracture from external wound, to preserve fixation or wounded joint. It is an upgraded product of tranditional plaster bandage. Product Feature: 1. Good Air Permeability: 2.Excellent X-Ray Permissbility: 3.High Strength Low Weight: 4.Waterproof: 5.Environmental Friendly: 6.Easy Operating: Product Size: AX002(2inch 4yards 5cm x 360cm) AX003(3inch 4yards 7.5cm x 360cm) AX004(2inch 4yards 10cm x 360cm) AX005(2inch 4yards 12.5cm x 360cm) AX006(2inch 4yards 15cm x 360cm) Using Method: a) Put on 1-2 layers stockinette or casting padding to protect the fixed part. b) Put on medical gloves c) Open the package, immerse the casting tape into 2 to 24 room temperature water for 4-6 seconds and squeeze 2-3 times in order to remove extra water. d) Take the cast out of water, and squeeze out extra water. e) Wrap spirally on the fixed part, overlapping the previous layer by one half or two thirds the wideth of the roll. 3-4 layers are enough for a non-weight-bearing cast, and 5-6 layers are normally adequate for a weight-bearing cast. f) Make shape of the casting tape according to real needs. Make forward and backward movements in order to achieve good contact between layers. g) The operation needs to be done in 3-5 minutes. And allow 10 mins for the cast to sufficiently cure. Patients are not allowed to move in these 10 mins. In room temperature, the product will sufficiently cure in 30 minutes after taking out of water. h) To remove the cast, pls use electric plaster saw. Packing: There are three layers of package: 1st 4 Layers Aluminum Foil Bag 2nd Inner Paper Box 3rd Imported Double Thickening Corruaged Carton Company: Ansen Medical is a professional manufacturer and exporter of orthopedic disposable products, such as orthopedic casting tapes, orthopedic splint etc. The products are CE and FDA certified, and are sold to Asia, North America, Europe, Africa and

Material: fiberglass and water-activated polyurethane. Application area: mainly used for the external fixation of fracture and common orthopedics. Model No.: AX002 (5cm*360cm) Size: standard or customized Package: 10bags*12boxes/ctn Characteristics: 1. High Strength and Light Weight. 2. Quick Solidifying and Good Mouldability. 3. Easy Operating. 4. Excellent X-ray Radiolucency. 5. Good Air-permeability. 6. Water-resistant. 7. Environment Friendly Materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.120kg

Material: fiberglass Application area: mainly used for the external fixation of fracture and common orthopedics. Model no.: ax005 (12.5cm*360cm) Size: standard or customized Package: 10bags*9boxes/ctn Characteristics: 1. High strength and light weight. 2. Quick solidifying and good mouldability. 3. Easy operating. 4. Excellent x-ray radiolucency. 5. Good air-permeability. 6. Water-resistant. 7. Environment friendly materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.280kg

Ansen casting tape consists of knitted fiberglass fabric and polyester fabric. It has the advantages of excellent x-ray permissibility, light weight, high strength, air-permeability, water resistance, comfort, hygienic and neat appearance to patients. Apply to orthopedics department, for connecting fracture part, fix swelling part or injured joint. We have various size and color for choose. 10bags/box, 12boxes/ctn, The carton dimension is 65*41*40cm

Orthopedic casting tape Enriched with polyurathane resin, our casting tape have good weight bearing strength & 3-4 min setting time, tact free roll down & smoothest finish. It is dipped in water, squeezed and applied for immoblization. Commonly used by orthopedic doctors. 12 - pieces packed in a small inner box. For small sizes. 10 - pieces packed in a small inner box, for 5". Outer/bigger box contains 10 small/inner boxes.

G&W is a company which produces all Cast & Splint applied to orthopedic surgery, and broadened its ground in the market by developing GR CAST & GR SPLINT for several researches & developments which are substantially different to the existing cast. Alpha Cast is the orthopedic fixed tape to make broken bones or damaged muscles cured by molding in the right position. -

Material: fiberglass and water-activated polyurethane. Application area: mainly used for the external fixation of fracture and common orthopedics. Model No.: AX003 (7.5cm*360cm) Size: standard or customized Package: 10bags*12boxes/ctn Characteristics: 1. High Strength and Light Weight. 2. Quick Solidifying and Good Mouldability. 3. Easy Operating. 4. Excellent X-ray Radiolucency. 5. Good Air-permeability. 6. Water-resistant. 7. Environment Friendly Materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.142kg

Material: fiberglass and water-activated polyurethane. Application area: mainly used for the external fixation of fracture and common orthopedics. Model No.: AX006 (15cm*360cm) Size: standard or customized Package: 10bags*9boxes/ctn Characteristics: 1. High Strength and Light Weight. 2. Quick Solidifying and Good Mouldability. 3. Easy Operating. 4. Excellent X-ray Radiolucency. 5. Good Air-permeability. 6. Water-resistant. 7. Environment Friendly Materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.298kg

Orthopedic Casting Tape Color Various Casting Tape Meet ISO 13485, CE, FDA This product is made of knitted fiberglass fabric or polyester fabric, and water-activated polyurethane resin. It uses environment friendly materials, and mainly used for the external fixation of fracture and common orthopedics. This product has many advantages comparing with plaster bandage. It is the upgraded and replaced product of the traditional plaster bandage. Fiberglass Casting Tape has higher strength and is easier to be cut than Polyester Casting Tape. Polyester Casting Tape can be burnt thoroughly, so it is more environmentally friendly. How to use: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, DIP in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Characteristics: High Strength. Light Weight. Quick Solidifying and Good Mouldability. Easy Operating. Excellent X-ray Radiolucency. Good Air-permeability. Water-resistant. Environment Friendly Materials. Clean and Comfort. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify.

is specializing in the production of medical consumables, established in 2012 with a registered capital of 30 million. The main products are absorbable surgical suture with needle Plain Chromic Catgut, PGA, PDO, PGLA, PGCL, etc., non-absorbable surgical suture with needle Silk, Nylon, Polyester, Polypropylene etc., suture materials, cassette sutures and surgical needle 300SS and 400SS Series, lifting threads for beauty, medical facial mask, orthopedic casting tapes & splints, plaster, IV cannula, polypropylene meshes and absorbable bone nails and so on.

Description of orthopedic casting tape: It is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It is used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint. It is the upgraded and replaced product of the traditional plaster bandage.Age. Advantages of orthopedic casting tape: High strength, light weight molding fast Good air permeability Excellent x-ray radiolucency Waterproof Environmentally friendly Simple operation Operation of medical disposable casting tape: 1. Wear the surgical gloves and choose the proper specifications. 2. Put the cast padding or stockinet on the fixed part. 3. Open the package and take out the cast, immerse the cast in room temperature water at 3-5 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally on injured parts with 2~3 layers, overlapping the previous layer by one-half or two- thirds the width of the roll. 5. Shape according to the need, smooth and rub the surface to achieve good contact between layers. 6. Use the electric cast saw to cut and remove it. Certificates of orthopedic casting tape: ce & fda Package:oem service is available Storage & warranty: Be careful not to break the packaging Storage at room temperature Shelf-lift: 2 years Shipping: within 15 working days after payment Exhibition: Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products, such as fiberglass casting tape, splint , also supply cast padding, stockinette, elastic bandage, crepe bandage, cohesive bandage, gloves and electric cast saw

Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46).

Engineering goods like machined, forged, stamped, casting, aluminum casting, aluminum extrusion, fasteners, springs, washers, gaskets, oil seals, rubber components, etc.

Orthopedic casting tape, orthopedic splint, synthetic orthopedic fiberglass cast, synthetic orthopedic poly cast, fiber cast, poly cast, fiberglass casting tape, fiberglass fabric, polyurethane resin, polyurethane coating resin, polyurethane coating machine for casting tape, poly cast.Oem manufacturing, customized manufacturing, exporting, design

Customised cast iron castings manhole covers, valve boxes, gully grating, surface boxes, tree gratings.