Corner Cube Retroreflectors Corner Cube Prism is also called Retroreflector or Trihedral Prism. In the Corner Cube Prism, three reflecting surfaces are perpendicular to each other, like the side wall of the cube. The input surface is perpendicular to the cube diagonal. Disregarding the angle of incidence, the output beam is parallel to the input one, but it is of opposite direction. Inset of the several corner prisms, for better matching, their entrance-exit surface is often hexagonal. In case of this prism the phenomenon of full internal reflection occurs so it is not necessary, (however it is possible) to put mirror coating on the reflecting faces. Normally the reflection surfaces are Al reflection coating, and then covered with Cu and Black Painting. Specifications: Material: BK7 Glass Dimension Tolerance (mm): 0.2 (General), 0.1 (High Precision) Deviation: 180 3 arc secs Flatness (per 25mm 633nm): 2(General), 10 (High Precision) Clear Aperture: 80% (small size),90%(large size) Surface Quality: 60/40 (General), 10/5 (High Precision) Bevel (mm): 0.1-0.5 Coating on input and output sides: Note for corner cube retroreflector: (1). Besides N-BK7, custom-made corner cube Prisms made of other optical materials are available. (2). Corner Cube Prisms with lower deviation tolerance, such as 1, 30, or 10, are available. (3). Corner Cube Prisms with better surface Quality (better than 40/20 or 20/10) are available. (4). HR or Metal reflection coating(Al, Ag, Cu, etc.) on reflection surfaces is available. (5). AR coating on input/output surface is available upon request. (6).Custom-made non-standard Corner Cube Prisms at any other size are available upon request.
"substrate: h-zf3 Dimensions: 25.4 x 25.4 x 25.4cm Surface quality: 60/40 Surface flatness: lambda/10 Beam deviation:
"substrate: h-zf3 Dimensions: 25.4 x 25.4 x 25.4cm Surface quality: 60/40 Surface flatness: lambda/10 Beam deviation:
Optical prisms, lenses, and coating.
BK7 Glass Powell Lens PARAMETER: The Powell lens is a quantum leap forward in line generator performance over the simple cylinder lens. A cylinder lens produces a poorly illuminated line, one limited by the non-uniform, Gaussian laser beam. The Powell lens' rounded roof is in fact a complex two-dimensional aspheric curve that generates a tremendous amount of spherical aberration that redistributes the light along the line; decreasing the light in the central area while increasing the light level at the line's ends. The result is a very uniformly illuminated line used in all manner of machine vision applications; from bio-medical and automobile assembly to chocolate chip cookie production. The Customized Powell Prism resembles a round prism with a curved roof line. The lens is a laser line generator, stretching a narrow laser beam into a uniformly illuminated straight line . Specification Material Fused silica/ BK7glass Diameter 0.8mm, 1mm, 2mm, 3mm, 5mm, 9mm, 10mm, 15mm or customized size Diameter Tolerance +0.0/-0.05mm / ±0.05mm Range of Fan 3°,5°,10°,15°,20°,30°,45°,53°,60°,70°,75°,85°,90°96°,100°,110°,120° Angle tolerance 90% Bevel
PARAMETER: Rhombic prisms are used to displace a beam laterally without changing its direction. They may be coated to transmit part of the beam and produce two parallel and displaced emerging beams. Can be coated to produce a polarizing beam separator. These prisms are manufactured from either BK7A or Fused Silica. Rhomboid Prism with Coating are supplied uncoated but many coating options are available. Rhomboid prisms are commonly used to displace a laser beam without changing its direction. In imaging applications, rhomboid prisms will displace the optical axis without inverting the image. The lateral displacement is equal to the length of the prism. Specification. Material: BK7 glass / UV Fused Silica Surface Flatness: < λ / 8 @ 633 nm Surface Quality: 60/40, 40/20, 20/10 Dimension Tolerance: < + 0.00 / 0.20 mm Angular Deviation < 3 arc min~ 30arc sec. Clear Aperture: > 85% Bevel: 0.3 mm x 45° Coating As per customers request
DISULPHO GROUP PRODUCT NAME C.I. NO. AREA OF APPLICATION Bridgeo Milky White BA 267% Powder 113 Suitable at high temperature exhaust with H2O2 bleach. Bridgeo Milky White SRK Powder 113 Suitable at high temperature exhaust with H2O2 bleach. Bridgeo Milky White BHT-HC Powder 252 Suitable at high temperature exhaust with H2O2 bleach. Bridgeo Milky White WHN-C Powder 113 Suitable at high temperature exhaust with H2O2 bleach for cotton, nylon, wool & silk Bridgeo Milky White WHN Powder 113 Suitable at high temperature exhaust with H2O2 bleach for cotton, nylon, wool & silk Bridgeo Milky White S Powder -- Tinted product for Exhaust at high temperature Bridgeo Milky White 4BB Powder 28 Tinted product for Exhaust at high temperature for cotton (terry-towel) & blend. Bridgeo Milky White BHT-HC Liquid 252 Suitable at high temperature exhaust with H2O2 bleach. Bridgeo Milky White TG Liquid 113 Suitable at high temperature exhaust with H2O2 bleach. Bridgeo Milky White BA Liquid 113 Suitable at high temperature exhaust with H2O2 bleach. Bridgeo Milky White 4BK Powder 252 Suitable at high temperature exhaust with H2O2 bleach. TETRASULPHO GROUP Bridgeo Milky White BBU Powder 220 Padding & Exhaust at medium temperature Bridgeo Milky White 2B CONC Powder 24 Padding & Exhaust at medium temperature Bridgeo Milky White BVN CONC Powder -- Padding & Exhaust at medium temperature Bridgeo Milky White BVN CONC Powder (B) -- Padding & Exhaust at medium temperature Bridgeo Milky White 2B Powder 24 Bleaching with H2O2, padding and exhaust at medium temperature Bridgeo Milky White 2BT Powder 28 Bleaching with H2O2, padding and exhaust at medium temperature Bridgeo Milky White BVN Powder (BB Supra) -- Bleaching with H2O2, padding and exhaust at medium temperature Bridgeo Milky White HI Powder -- Bleaching with H2O2, padding and exhaust at medium temperature Bridgeo Milky White S Powder -- Bleaching with H2O2, padding and exhaust at medium temperature Bridgeo Milky White UF-P Liquid 220 Bleaching with H2O2, padding and exhaust at medium temperature Bridgeo Milky White ABIZ Liquid 220 Padding & Exhaust at medium temperature Bridgeo Milky White API Liquid 220 Padding & Exhaust at medium temperature Bridgeo Milky White ABP Liquid 220 Padding & Exhaust at medium temperature Bridgeo Milky White SI Liquid 220 Padding & Exhaust at medium temperature Bridgeo Milky White UBR Liquid 263 Padding & Exhaust at medium temperature HEXASULPHO GROUP Bridgeo Milky White AS Liquid -- Padding and exhaust at low temperature. Bridgeo Milky White HF Liquid (UF AS LIQ) -- Padding and exhaust at low temperature. Bridgeo Milky White BSU Liquid 264 Padding and exhaust at low temperature. Bridgeo Milky White AS Powder -- Suitable for Acid Cross Linking, Padding and exhaust at low temp, reddish tone
DISULPHO GROUP PRODUCT NAME C.I. NO. AREA OF APPLICATION REMARKS Bridgeo Milky White BA 267% Powder 113 Suitable for recycled pulp at wet end at alkaline pH. Bridgeo Milky White BMK Powder 113 Suitable for recycled pulp at wet end at alkaline pH. Bridgeo Milky White SRK Powder 252 Suitable for recycled pulp at wet end at alkaline pH. Bridgeo Milky White BHT-HC Powder 252 Suitable for recycled pulp at wet end at alkaline pH. Bridgeo Milky White BHT-HC Liquid 252 Suitable for recycled pulp at wet end at alkaline pH. Bridgeo Milky White UP-HC Liquid 113 Suitable for virgin and wood pulp at alkaline pH. Bridgeo Milky White UP Liquid 113 Suitable for virgin and wood pulp at alkaline pH. Bridgeo Milky White UF-UP Liquid 113 Suitable for virgin and wood pulp at alkaline pH. Urea & Salt Free TETRASULPHO GROUP Bridgeo Milky White BBU Powder 220 Used in Waste Paper & Straw Pulp in acidic to neutral pH. Bridgeo Milky White ABP-X Powder 220 Mostly used in Waste Paper Pulp in acidic to neutral pH. Bridgeo Milky White UF-P Liquid 220 Mostly used in Pulp Board & Tissue in acidic to neutral pH. Urea & Salt Free Bridgeo Milky White ABIZ Liquid 220 Used in Tissue from Waste Paper in acidic to neutral pH. Bridgeo Milky White API Liquid 220 Used in newsprint from Waste Paper in acidic to neutral pH. Bridgeo Milky White ABP Liquid 220 Used in newsprint from Waste Paper in acidic to neutral pH. Bridgeo Milky White SI Liquid 220 Used in newsprint from Waste Paper in acidic to neutral pH. HEXASULPHO GROUP Bridgeo Milky White AS Liquid -- Used in Size Press & Coating, at any pH. Urea & Salt Free Bridgeo Milky White HF Liquid -- Used in Size Press & Coating, at any pH. Urea & Salt Free Bridgeo Milky White BSU Liquid 264 Used in Size Press & Coating, at any pH for extra bluish whiteness Urea & Salt Free Bridgeo Milky White MST Liquid 353 In Board Machine at Coating for reddish shade Urea & Salt Free Bridgeo Milky White BSUT Liquid 264 Used in Size Press & Coating for violetish blue shade Bridgeo Milky White AS Powder -- Used in Size Press & Coating.
DISULPHO GROUP PRODUCT NAME C.I. NO. AREA OF APPLICATION Bridgeo Milky White BA 267% Powder 113 Suitable at high temperature exhaust with H2O2 bleach. Bridgeo Milky White SRK Powder 113 Suitable at high temperature exhaust with H2O2 bleach. Bridgeo Milky White BHT-HC Powder 252 Suitable at high temperature exhaust with H2O2 bleach. Bridgeo Milky White WHN-C Powder 113 Suitable at high temperature exhaust with H2O2 bleach for cotton, nylon, wool & silk Bridgeo Milky White WHN Powder 113 Suitable at high temperature exhaust with H2O2 bleach for cotton, nylon, wool & silk Bridgeo Milky White S Powder -- Tinted product for Exhaust at high temperature Bridgeo Milky White 4BB Powder 28 Tinted product for Exhaust at high temperature for cotton (terry-towel) & blend. Bridgeo Milky White BHT-HC Liquid 252 Suitable at high temperature exhaust with H2O2 bleach. Bridgeo Milky White TG Liquid 113 Suitable at high temperature exhaust with H2O2 bleach. Bridgeo Milky White BA Liquid 113 Suitable at high temperature exhaust with H2O2 bleach. Bridgeo Milky White 4BK Powder 252 Suitable at high temperature exhaust with H2O2 bleach TETRASULPHO GROUP Bridgeo Milky White BBU Powder 220 Padding & Exhaust at medium temperature Bridgeo Milky White 2B CONC Powder 24 Padding & Exhaust at medium temperature Bridgeo Milky White BVN CONC Powder -- Padding & Exhaust at medium temperature Bridgeo Milky White BVN CONC Powder (B) -- Padding & Exhaust at medium temperature Bridgeo Milky White 2B Powder 24 Bleaching with H2O2, padding and exhaust at medium temperature Bridgeo Milky White 2BT Powder 28 Bleaching with H2O2, padding and exhaust at medium temperature Bridgeo Milky White BVN Powder (BB Supra) -- Bleaching with H2O2, padding and exhaust at medium temperature Bridgeo Milky White HI Powder -- Bleaching with H2O2, padding and exhaust at medium temperature Bridgeo Milky White S Powder -- Bleaching with H2O2, padding and exhaust at medium temperature Bridgeo Milky White UF-P Liquid 220 Bleaching with H2O2, padding and exhaust at medium temperature Bridgeo Milky White ABIZ Liquid 220 Padding & Exhaust at medium temperature Bridgeo Milky White API Liquid 220 Padding & Exhaust at medium temperature Bridgeo Milky White ABP Liquid 220 Padding & Exhaust at medium temperature Bridgeo Milky White SI Liquid 220 Padding & Exhaust at medium temperature Bridgeo Milky White UBR Liquid 263 Padding & Exhaust at medium temperature HEXASULPHO GROUP Bridgeo Milky White AS Liquid -- Padding and exhaust at low temperature. Bridgeo Milky White HF Liquid (UF AS LIQ) -- Padding and exhaust at low temperature.
Disulpho Group PRODUCT NAME C.I. NO. AREA OF APPLICATION REMARKS Bridgeo Milky White BA 267% Powder 113 Suitable for recycled pulp at wet end at alkaline pH. Bridgeo Milky White BMK Powder 113 Suitable for recycled pulp at wet end at alkaline pH. Bridgeo Milky White SRK Powder 252 Suitable for recycled pulp at wet end at alkaline pH. Bridgeo Milky White BHT-HC Powder 252 Suitable for recycled pulp at wet end at alkaline pH. Bridgeo Milky White BHT-HC Liquid 252 Suitable for recycled pulp at wet end at alkaline pH. Bridgeo Milky White UP-HC Liquid 113 Suitable for virgin and wood pulp at alkaline pH. Bridgeo Milky White UP Liquid 113 Suitable for virgin and wood pulp at alkaline pH. Bridgeo Milky White UF-UP Liquid 113 Suitable for virgin and wood pulp at alkaline pH. Urea & Salt Free TETRASULPHO GROUP Bridgeo Milky White BBU Powder 220 Used in Waste Paper & Straw Pulp in acidic to neutral pH. Bridgeo Milky White ABP-X Powder 220 Mostly used in Waste Paper Pulp in acidic to neutral pH. Bridgeo Milky White UF-P Liquid 220 Mostly used in Pulp Board & Tissue in acidic to neutral pH. Urea & Salt Free Bridgeo Milky White ABIZ Liquid 220 Used in Tissue from Waste Paper in acidic to neutral pH. Bridgeo Milky White API Liquid 220 Used in newsprint from Waste Paper in acidic to neutral pH. Bridgeo Milky White ABP Liquid 220 Used in newsprint from Waste Paper in acidic to neutral pH. Bridgeo Milky White SI Liquid 220 Used in newsprint from Waste Paper in acidic to neutral pH HEXASULPHO GROUP Bridgeo Milky White AS Liquid -- Used in Size Press & Coating, at any pH. Urea & Salt Free Bridgeo Milky White HF Liquid -- Used in Size Press & Coating, at any pH. Urea & Salt Free Bridgeo Milky White BSU Liquid 264 Used in Size Press & Coating, at any pH for extra bluish whiteness Urea & Salt Free Bridgeo Milky White MST Liquid 353 In Board Machine at Coating for reddish shade Urea & Salt Free Bridgeo Milky White BSUT Liquid 264 Used in Size Press & Coating for violetish blue shade Bridgeo Milky White AS Powder -- Used in Size Press & Coating.
CHF 19,03â??CHF 107,02 including VAT, excluding shipping Size 1 litre 5 litres 10 litres Very suitable for non-ferrous and precious metals, brass, nickel and titanium. The product is liquid, emulsifying, silicate and phosphate-free, mildly alkaline. It also removes greasy fingers and hand sweat Weight n/a Size 1l, 5l, 10l
Properties 1. Excellent transparency, outstanding resistance to aging. 2. It has good insulating properties and mechanical strength; to acid, alkali, salt has a strong resistance to corrosion; and because easy processing. Applications 1.Extruded sheets for signage, displays and building material 2.Motive parts such as tail lamps, meter covers and sun visors 3.General sundries such as tableware, kitchenware, giftware and bathroom accessories 4.Optical lenses such as sunglasses, reading glasses and camera lenses 5.Light guide panels for LCD displays 6.Other applications such as mobile phone display panels, clock covers, lighting covers/accessories, optical fibres, toys, etc.
Prisms Optical Components PARAMETER: BK7 Glass Dove Prism have an unusual and very interesting characteristic , if you look through the prism and rotate it around a longitudinal axis, the image rotates through twice the angle through which the dove prism itself rotates. For optimal peformance, use dove prisms with collimated light. Specification Material BK7 glass / Fused Silica Dimension tolerance + 0.0 / -0.2mm Deviation 3arc min. Flatness λ/2@632.8nm Clear aperture >85% Surface quality 60/40, 40/20 Bevel 0.1mm Ã?45°
Optical Components Fused Silica Wedge Prism PARAMETER: The wedge prism is a prism with a shallow angle between its input and output surfaces. This angle is usually 3 degrees or less. Refraction at the surfaces causes the prism to deflect light by a fixed angle. When viewing a scene through such a prism, objects will appear to be offset by an amount that varies with their distance from the prism. Specification Material BK7 glass / Fused silica Surface Flatness: < λ / 10 @ 633nm ~λ/4@633nm Surface Quality: 60/40, 40/20, 20/10, 10/5 (both sides) Dimension Tolerance:
"substrate: h-zf3 Dimensions: 25.4 x 25.4 x 25.4cm Surface quality: 60/40 Surface flatness: lambda/10 Beam deviation:
"substrate: h-k9l Dimensions: 25.4 x 25.4 x 25.4mm Surface quality: 60/40 Surface flatness: lambda/10 Beam deviation:
"substrate: h-k9l Dimensions: 20.0 x 20.0 x 20.0mm Surface quality: 60/40 Surface flatness: lambda/10 Beam deviation:
Porro Prism A refracting optical prism used in optical instruments to modify image orientation, In use, the light enters through the largest rectangular plane in the prism, passes through two total reflections of the inclined plane, and then penetrates the original plane of incidence, Because the light comes in and out normally, the prism does not disperse. But the image that passes through Porro prism will be flipped 180 degrees, and it will travel in the direction it entered, which means it will travel 180 degrees. Porro Prism Material BK7, UV Fused Silica, Sapphire, ZnSe,Caf2,Si,Ge,etc. Size 3mm-300mm Size tolerance 0.00/-0.05mm or customer request Clear Aperture 90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10 1/4lambda at 632.80nm Chamfer 0.25mmx45 Angle tolerance
High quality, high accuracy Min diameter>0.6mm Angle accuracy 30¡å Surface quality 20-10 We can provide any kind of coating. Cushioning material.
Jilin tianhua opto-electrical technology development co., ltd., production and sale of precise optical elements. Our company locates in changchun city, jilin province, the optical base of china. We specialize in cylindrical mirror. There are more than 60 people in the company, who are researchers and professional technicians of changchun institute of optics, fine mechanics and physics, chinese academy of sciences. Our company has advanced optical cold-working detecting equipments and process equipments, and provides high-quality products and professional services for customers. We can produce cylindrical mirrors of different specifications, sizes, radii, materials and special shapes or organized types. We can process high-precision cylindrical mirrors of special optical characters, such as: achromatic cylindrical mirror, parabolic mirror, cylindrical ellipsoidal mirror and hyperbolic mirror. Cylindrical mirrors of complicated shapes, such as: fan-typed, off-axis cylindrical mirror, angular cylindrical mirror, etc. In addition, we produce other optical elements such as flat mirror, window, prism, spherical lens, etc. Our company can design and process all kinds of optical elements according to requirements, and do gluing and filming on products. Substrate materials we usually use are optical glass, bk7, k9, violet quartz, ultrared quartz, caf2 crystal zf soft material, etc. (special material should be supplied by customers) the company takes “be faithful and honest, keep quality first, supply products on time and pursue perfect” as its operational principle. We are glad to communicate and cooperate widely with friends in domestic and abroad. We promise: to become your “wholesaler” of optical elements with high quality, high speed and low price. Soft paper and box 10*10*10cm 0.4kg
