CAS Number 101-20-2 Molecular Formula C13H9CL3N2O Appearance / Color White powder Content / Assay 98% Moisture(water) 0.15% Melting Point 250 - 255C Application It is widely used as biocide and preservatives for coatings, paints, resins emulsions, oil-water emulsions, starch solution and oilfield injection water, and as bactericides and algaecides for industrial water treatment, and as mildew-retarding agent for papermaking, the leather, the textile and its products and photo-chemicals.
HPAA is chemically stable, hard to be hydrolyzed, hard to be destroyed by acid or alkali, safety in use, no toxicity, no pollution. HPAA can improve zinc solubility. Its corrosion inhibition ability is 5-8 times better than that of HEDP and EDTMP. When built with low molecular polymers, its corrosion inhibition effect is even better. HPAA is mainly used as cathode corrosion inhibitor in oilfield refill water system in fields such as steel & iron, petrochemcal, power plant and medical industries. When built with zinc salt, the effect is even better.
Application 1. ATMP can be used in thermal power plant, recirculated cooling water of oil refinery, and recycle waterflood system of oilfield.. 2. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. 3. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. ATMP is usually used together with other organophosphoric acid, polycarboxylic acid and salt to build all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The recommended dosage is 5-20mg/L. As corrosion inhibitor, the recommended dosage is 20-80mg/L.
PBTCA is widely used in the formulation of efficient scale and corrosion inhibitors and is one of the best performing products. It is also an excellent stabilizer for zinc salts. Widely used as a corrosion and scale inhibitor in circulating cooling water systems and oilfield water injection systems, it is particularly suitable for use in combination with zinc salts and copolymers. It can be used in high temperature, high hardness, high alkalinity, and situations that require high concentration ratios. PBTCA can be used as a chelating agent and metal cleaning agent in the washing industry. PBTCA is generally used in combination with other water treatment agents such as zinc salts, copolymers, organic phosphines, and azoles; If used alone, the dosage is 5-15mg/L.
Fatty alcohol polyoxyethylene ether, levelling agent O also known as flat plus O, is a non-ionic surfactant, the appearance of milky white or beige paste, high molecular weight, solid (can be made into flake solid according to the requirements), easily soluble in water, ethanol, ethylene glycol, turbidity point, PH value of 1% water solution is neutral. Resistant to acid, alkali, hard water, heat and heavy metal salt. It has strong evenness, slow dyeing, permeability and diffusivity for all kinds of dyes. It can be used in the same solution with all kinds of surfactants and dyes. Appearance milky white, beige paste or solid shape PH 6-8 turbidity point 91-96 Applicationï¼? 1. As a non-ionic surfactant, the washing industry plays a role in emulsification, foaming, and decontamination. It is the main active ingredient of hand sanitizer, laundry detergent, shower gel, laundry detergent, detergent, and metal cleaning agent. 2. As a textile printing and dyeing auxiliary agent, the textile printing and dyeing industry plays an emulsifying role: emulsified silicone oil penetrating agent, leveling agent, polypropylene oil agent. 3. As a deinking agent, carpet detergent, and resin remover in the papermaking industry. 4. Other products such as pesticide emulsifiers, oil demulsifiers, lubricating oil emulsifiers, etc.
DBNPA is widely used in industrial circulating water systems, large air-condition, and large centers of sewage treatment to eliminate microorganisms and algae and shuck off clay. DBNPA is also used in the process of paper making to prevent reducing the quality of paper by the generation of microorganisms. DBNPA is suitable for metal cutting of cooling liquor, recovery system of oil, latex, and ply-woods as anti-spy biocides. DBNPA has the following advantages: easy to handle; no unusual oxidation hazards; similar performance and safety in paper and oilfield applications; used for slime control in the wet-end of the paper mill and performs exceptionally well against slime-forming bacteria. DBNPA has exhibited outstanding efficiency against bio-films and a broad spectrum of bacteria, fungi, and yeasts. Additionally, DBNPA series products are used in the short-term preservation of coatings and coating additives such as latex, starch, and mineral slurries. DBNPA is a fast-acting/quick-kill biocide that is broad-spectrum and does not contain or release formaldehyde.
CAS No: 1341-49-7 EINECS No: 215-676-4 Molecular formula: NH4HF2 Molecular weight: 38.0443 Industrial Ammonium Hydrogenfluoride [Molecular Formula] NH4HF2 [Molecular Weight] 57.04 [Properties] White needle-like crystal, easy deliquescence and agglomeration, soluble in water and slight soluble in alcohol; decompose to ammonia and ammonium bifluoride in heat water, decompose to ammonia and hydrogen fluoride when being heated, its aqueous solution is acidic and can corrode glass. [Uses] 1. Glass etchant, preservative, disinfectant, solvent for metal beryllium made of beryllium oxide, analytical reagent and surface treatment agent for silicon steel plate. 2. It is also used as an oxidant for the manufacture of ceramics and aluminum-magnesium alloys, as well as a cleaning agent for boiler feed water systems and steam generation systems. 3. Acidification treatment of oilfield sand. 4. Organic synthetic fluorinating agent. 5. Plating solution. 6. Reagents for extracting rare elements. 7. Paint industry
Specification Application EL-10 EL12 EL-20 HEL-20 1. Soluble in most organic solvents, dispersed in water, with excellent emulsification and diffusion properties. 2. In the textile industry, it is mainly used as a spinning oil for synthetic fibers such as polyester, polyacrylonitrile, and polyvinyl alcohol. It has emulsifying and anti-static effects, making the sizing soft and smooth, and reducing breakage; It can be used as a softening and smoothing agent in chemical fiber size, and can eliminate foam in synthetic size solution; HEL-20 also has the characteristic of low coking at high temperatures. 3. In the pharmaceutical industry, it is used as an emulsifier in the manufacturing of liniments, creams, emulsions, etc. 4. It can be used as pesticide emulsifier, lotion polymerization emulsifier, and used to prepare water-soluble metal cutting fluid and household washing products. EL-30 EL-40 HEL-40 1. Easily soluble in water, fatty acids, or other organic solvents, with excellent emulsification performance 2. Used as emulsifiers in the ink and pharmaceutical industries. 3. It can be used as an emulsifier for organic phosphorus pesticides. 4. Used as an o/w type emulsifier for emulsification of various planting, animal, and mineral oils. 5. EL-40 is used as a component of wool, wool oil and chemical fiber oil in the textile industry, which has both emulsifying effect and antistatic effect. It can be better mixed with other antistatic agent, and can also be used to prepare size to eliminate foam in synthetic size. EL-40 has excellent diffusion and protective colloid properties, and is used as a monomer in the wool spinning industry for blending with wool oil. It is easy to wash off and has good hard water resistance. 6. Used as a dehydrating agent for oil field raw oil. 7. Used in the metal processing industry to prepare water-soluble metal cutting fluids. 8. HEL-40 can be used as a pharmaceutical grade solvent. EL-60 1. This product is an o/w emulsifier. 2. It can be used as a chemical fiber oiling agent and a component of petroleum. 3. Pesticide emulsifier. 4. Petroleum dehydration demulsifier. 5. Ink, printing paste emulsifier. 6. Various planting, animal, and mineral oil emulsifiers. 7. Used as an emulsifier, fat enhancer, and emollient in the cosmetics and pharmaceutical industries. 8. It is used to manufacture shampoo foam bath liquid, skin care products, pharmaceuticals, etc. 9. Used in the metal processing industry to prepare metal cutting fluids. EL-80 EL-90
We are Jiangxi SIMO Biological Chemical Co. Ltd in China. We are manufacturer. We supply oil field chemicals with good quality and low price.
Overview Products Description The Composite Bridge Plug is made from composite material and easy to drill out. It is mainly composed of mandrel, rubber, slips, cones, protection bowls, release/start pins, lower sub and so on. The composite bridge plug is mainly used for provisional plugging in oil and gas well, and fracturing construction Working principle The opposite power produced by setting tool (wire line or transmitting hydraulic pressure in oil tube) acts on the lower sub, shears the starting dowels and exerts compressive force on rubber through cone. Inside the tension range slips dehisce and inlay the in wall of the casing, rubber expand to the in wall of the casing and seal up it, finish setting. When the tension rises to the shear rating, the starting dowels be sheared and the setting tool separates from the bridge plug, finish releasing. After taking out the setting tool, the frac ball that be put into the well will work hermetically with the head face of the mandrel. The plug can be quickly drilled out under the necessity of the after steps Drilling out Recommend the use of special milling tools. Recommend rotation rate: 60~150rpm, bit weight: 5~15kN, viscosity of drilling plug fluid:15~30mPas and minimum cyclic velocity: 36.6m/min, to make sure the debris circulates out. After the preparation is done, start the screw drill and drill slowly into the bridge plug. Ensure continuous drilling speed by applying drilling pressure. The torque added to the drilling tool should not be greater than the recommended value. Excessive drilling pressure increases the friction resistance of the pipe string and results in large pieces of debris which must be salvaged separately. Specification Type DTJ92 DTJ100 DTJ112 DTJ145 Suitable casing size 9.5-13.5lb/fï¼?99.56mm-103.88mmï¼? 13-18 lb/fï¼?108.62mm-114.14mmï¼? 17-23lb/ft 118.62mm-124.26mm 26-32lb/ft 154.78mm-159.42mm Max OD 3.62" 92mm 3.93 (100mm) 4.4" 112mm 5.68" 144mm Min ID 1.1" 28mm 1.8 (30mm) 1.5 38mm 1.14" 45mm Total length 26" 660mm 26" 660mm 26" 660mm 39.4" 1000mm Working pressure 10000psi 70MPa 10000psi 70MPa 10000psi 70MPa 10000psi ï¼?70MPa Working temperature 300 150 300 150 300 150 300 150 Seating load 120-130kN 160-180kN 160-180kN 160-180kN
It is applied to the oil well containing corrosive medium such as salt sulfur, carbon dioxide and bacteria and the wells with fewer sands.Comparing with conventional tubing pump,The API Tubing Pump has better performance in corrosion resistance & antifriction aspects.Plunger of it is nickel plated on alloy base,inside wall of barrel is plated hard cadmium,key parts,such as valve hood,valve ball,are made of materials with excellent mechanical performance and corrosion resistant property.Compared with conventional pump,the series of pump has a longer working life. Subsurface pump Per API Spec.11AX
The cementing plug is used to separate the cement slurry from the mud. It can prevent the mud from blending into the cement slurry to influence the cementing quality. Structure: conventional cementing plug & special cementing plug Conventional cementing plug is divided into top plug and bottom plug. Special plug has top/middle/bottom plug used in two-stage cementing, drill pipe plug and hollow plug used in drilling liner cementing and composite plug used in composite casing.
The Composite Bridge Plug is made from composite material and easy to drill out. It is mainly composed of mandrel, rubber, slips, cones, protection bowls, release/start pins, lower sub and so on. The composite bridge plug is mainly used for provisional plugging in oil and gas well, and fracturing construction Working principle The opposite power produced by setting tool (wire line or transmitting hydraulic pressure in oil tube) acts on the lower sub, shears the starting dowels and exerts compressive force on rubber through cone. Inside the tension range slips dehisce and inlay the in wall of the casing, rubber expand to the in wall of the casing and seal up it, finish setting. When the tension rises to the shear rating, the starting dowels be sheared and the setting tool separates from the bridge plug, finish releasing. After taking out the setting tool, the frac ball that be put into the well will work hermetically with the head face of the mandrel. The plug can be quickly drilled out under the necessity of the after steps Drilling out Recommend the use of special milling tools. Recommend rotation rate: 60~150rpm, bit weight: 5~15kN, viscosity of drilling plug fluid:15~30mPas and minimum cyclic velocity: 36.6m/min, to make sure the debris circulates out. After the preparation is done, start the screw drill and drill slowly into the bridge plug. Ensure continuous drilling speed by applying drilling pressure. The torque added to the drilling tool should not be greater than the recommended value. Excessive drilling pressure increases the friction resistance of the pipe string and results in large pieces of debris which must be salvaged separately.
A steel sucker rod is one of the important equipment of oil field.Can provide seven kinds of the level of sucker rod,including C, K, D, KD, HL, HY andC, K, D sucker rod press design and manufacture standard of API Spec 11 B, KD, HL, HY grade rod design and manufacture according to standard SY/T5029-2006, KH level rod according to standard within the company. Grade C sucker rod is mainly used for light, medium load, no corrosion or corrosion shallow Wells or in deep well pumping, material is carbon steel or manganese steel. Grade D sucker rod is made of high quality alloy steel, after heat treatment with high strength, plasticity is good, long life and other characteristics, it is suitable for light when there is no corrosion or corrosive medium in the deep Wells under the environment of use. Grade H(HLandHY) sucker rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production. And K and KD sucker rod with different content of Ni Cr - Ni - Mo high quality alloy steel manufacturing, have anticorrosive, resistance to corrosion function, respectively applicable to strong corrosion of shallow, middle and deep Wells.
1.TheTubing Centralizer is designed to be run in the tubing string to keep the tubing centralized which may help in preventing premature wear of the casing and tubing. 2.The Tubing Centralizer can be directly above the pump for the vibration and harmonics dampening effects and other units can be installed further up the tubing string to provide the tubing and casing protection. 3.The Tubing Centralizer has full tubing ID specifications and is available for a large variety of casing sizes and tubing connections
The TUF swab cup is a flexible, synthetic rubber cup with spring steel reinforcing wires for heavy loads but is flexible enough for light or medium loads. The TUF swab cup is an all-purpose, synthetic rubber cup containing strong, flexible spring steel reinforcing wires. Technical Parameters: Tubing O.D. LBS./Foot Tubing Min I.D. Nominal Tubing Size Wire Cup 2.375 4.6 1.995 2â?? PW2R 1.935 2.375 4.6 1.995 2â?? PW2R 1.915 2.875 6.4 2.441 2-1/2â?? PW2-1/2R 2.370 2.875 6.4 2.441 2-1/2â?? PW2-1/2U 2.340 2.875 7.9 2.323 2-1/2â?? PW2-1/2HS 2.220 2.875 8.7 2.259 2-1/2â?? PW2.259 2.050 3.50 8.5-10.2 2.992 3-1/2â?? PW3-1/2 2.920 4.50 10.4-12.5 4.090-3.958 4-1/2â?? PW4-1/2C 3.890 5.50 13.5-15.5 5.044-4.950 5-1/2â?? PW5-1/2C 4.920
Sucker Rod Coupling The sucker rod couplings are used for connecting sucker rods, polished rods and sinker bars. ** The main types of sucker rod couplings are sucker rod couplings, polished rod couplings and sub-couplings. ** All of the three types have two classes: class T(through-hardened)and class SM (sprayed metal). **Material: carbon steel, alloy steel. **Specification:5/8", 3/4", 7/8"1", 1 1/8"
Centralizers are mechanical devices that prevent casing from contacting the well bore wall. A continuous 360-degree annular space around casing allows cement to completely seal the casing to the borehole wall. Eneroil Centralizers are renowned in the Oil & Gas industry for their standard quality and performances. Our range of Casing Centralizer includes: 1. Bow Spring Centralizer 2. Single Piece Centralizer 3. Solid Rigid Centralizer 4. Roller Centralizers 5. Thermoplastic Centralizers Based on the current challenges of well operations, our application engineers have designed cementing equipment that suits larger variety of well applications and this range includes Welded, Non-welded, Rigid, Semi-rigid, Roller centralizers, Bow type centralizer along with our latest masterpiece - Single Piece centralizer & Thermoplastic centralizer. Eneroil manufactured Casing Centralizers are mechanical devices that prevent casing from contacting the wellbore wall for all kind of well cementing jobs.
The couplings produced by our company are good at stable quality which the technical parameters are completely complied with the requirements of API5CT and API5B latest standards. Meanwhile, the company has equipped with more than 30 sets CNC threading machines, is able to produce variety of steel grade couplings include STC, LTC, BTC and NU, EU threading couplings. We also supply permium thread products by customer's request 1.Grade: J55, K55, N80-1, N80-Q, L80, C90, P110 2.We also supply permium thread products by customer's request 3.Size: tubing coupling from 1.9" to 4-1/2", Casing coupling from 4-1/2"to 13-3/8" 4.Type: NU, EU (tubing coupling), STC, LC, BTC (casing coupling). 5.Surface treatment: Whole phosphating, or inside phosphating and outside coating 6.Packing: By carton, wooden case, wooden pallet, or by requirements of customers Otherwise, our company manufactures and sells casing and tubing, threader protector etc. We always do business based on the principle of equality and mutual benefit, we provide the high quality and competitive price products
Api oilfield power swivel Power swivel is the device installing on the derrick of servicing rig, to provide rotating power. Except the use for such workover jobs as casing milling, milling, drilling cement plug and bridge plug and fishing, it is also used for sidetracking drilling, drilling open hole and coring. The product is designed and manufactured according to api 8c specifications.
