Capron Eco Magnatec is a four-season gasoline engine oil produced with mineral base oil and good-quality additives which features proper anti-rust and anti-corrosion properties.
Capron Eco Magnatec is a four-season gasoline engine oil produced with mineral base oil and good-quality additives which features proper anti-rust and anti-corrosion properties.
Capron Magnatec Plus is a premium quality four-season gasoline engine oil produced with semi-synthetic base oil and high-quality additives which features excellent anti-rust and anti-corrosion properties.
This is a full synthetic lubricant based on carefully selected very high quality base oils, providing outstanding wear and sludge protection, even under the most severe driving conditions. Due to its enhanced frictional properties, improved fuel economy is obtained.
This is a full synthetic lubricant based on carefully selected very high quality base oils and high quality additives of the latest generation, specially designed to meet the strict requirements of manufacturers. This provides an excellent fluidity at low temperatures, a very low resistance when starting, an exceptional viscosity index and a very high thermal stability.
Multigrade engine oil suitable for all petrol and diesel engines in all working conditions and during the whole year. Due to the high content of active components, this oil can be used all year round in the toughest conditions. Because of the high resistance against ageing, it is possible to apply longer drain periods. Available in 1L, 4L and 210L drum.
A Belgium engine motor oil with Ch4 suitable for all diesel engines with natural aspiration or turbocharging, in all working conditions in all seasons and long drain periods, up to 15.000 km depending the circumstances. Total engine protection : performance in keeping the engine clean. Drain interval extension : long period between oil change. Available in 1L,5L and 210L.
ATF III Is a synthetic ATF (Automatic Transmission Fluid), designed on the basis of high quality hydrocrack oils with a special additive and inhibition, which ensure a perfect function of the automatic transmission. Available in 1L and 4L packaging. 1 carton contains 4x4L.
USED ENGINE OIL SPECIFICATIONS Test Units Methods Result Density @ 15 �°C ASTM-D4052 0.88 Colour Max ASTM-D1500 6 Flash Point PMCC Min �°C ASTM-D93 70-80 Pour Point - Max �°C ASTM-D97 -7 Viscosity @ 50 �°C Cst ASTM-D445 60 Sulfur Content - Max WT% ASTM-D4294 below 0.5% Water WT % ASTM-D482 3% Appearance - Visual Black Sediment Below 0.5%
SAE 40 - Industrial Oil SAE 50 - Industrial Oil AP3 Grease
Product Overview The L83/AL103 Series is single-line lubrication system, consists of plunger pump, single-line distributor, cycling indicator and monitor, using high-viscosity NLGI-3# grease in alpine and frozen regions. Applications Wind turbine, port machinery, mining machinery, agricultural machinery, hoisting machinery,construction machinery, beverage equipment, etc. Working Principles The LCD monitor controls the plunger pump for periodic running. When the system works, the monitor drives the grease pump for out put grease. After entering the grease tube, the high-pressure grease is supplied to each greasing points successively through the grease distributor . If the machinery equipment being lubricated is equipped with the air source, this ALP83/103 grease pump series can leave out its own air pump and air holder.
Electric lube feeding pump An electric lube feeding pump is composed of a transmission part, a sealing part, a pressurizing device, oil lifting part, safety valve, and lube feeding part, etc. Inserted into the standard 15kg oil tank, it is convenient to use. Working Principle: The transmission part drives the oil lifting part to move up and down, making the one-way valve inside the cavity to close or open. When the one-way valve close, the lube feeding pump sucks lube. On the contrary, the pump presses the lube out. Component Structure: transmission part sealing part pressurizing part oil lifting part Advantages: With high flow and high pressure, our electric lube feeding pump is highly efficient with good performance. The flow of current electric lube feeding pumps in domestic and international markets is less than 0.5L/min (lube 2# ). However, the flow of our lube feeding pump is 1L/min(lube 2# ), which is twice that of other pumps in the market. Parameters: 1. Electricity:AC220V, 50Hz 2.The output of the outlet at ordinary temperature:1.2L/min(without oil pipe);1L/min (with 6M oil pipe) 3.The output of the outlet at low temperature(-10°C):0.9L/min(without oil pipe);0.7L/min(with 6M oil pipe) 4. Max delivery pressure:30MPa 5. Lube:0-3# lithium grease 6. The specification of pipes:Length 6M, pipe diameterÏ?13*Ï?22 Fittings Customization: 1. Pipe:max length: 10 meters 2. Pipe connectors: The customer can buy them by their own or provide us with their models for customization.
Features 1. It can allow the test in a different direction, and can even be used in a constant temperature water bath; 2. With digital display depth measuring mechanism, easy to use, good repeatability and high accuracy; 3. Bracket move fast and fretting two kinds of speed, ease of test operation of the tip of the needle at the surface of the sample; 4. It has a table level adjusting mechanism, and easy to adjust; 5. With manual release pin into pieces of bodies, to ensure that in the not automatically controlled release, still normal operation.
EAJ 100 Wire Rope Grease Lubricant NLGI 00 / 000 | Lithium Grease | Water Resistant | Black Grey EAJ 100 WRGL is specifically designed to extend the life of wire ropes and chains. It penetrates to the fiber rope core to prevent drying out. It is formulated from a hydrophobic thickener to produce a high heat resistance, water repellent lubrication. It is fortified with additives for extreme pressures, anti-oxidation, anti-rust and corrosion inhibition. The protective coating will resist rainfall and immersion in sea water. It will not wash out easily in presence of water. EAJ 100 WRGL is recommended for use on wire ropes and cables, link chains, track rollers, lifting ropes, cranes, cargo hoists, drag lines, and applications which require hard film lubrication and protection. 18 kg/pail, 180kg/drum
Authorize distributors of a complete range of Lanopro Products. PRODUCTS: EAL Greases, Mineral Greases, Coatings, Hydraulic Oils, Cleaners, Specialty products APPLICATIONS: Marine, Offshore, Mining, Automotive, Food Marine multi-purpose; Multi-purpose, Roller bearings, Ball bearings, Sliding bearings EP0, EP2, OG Grease, Marine Gr Moly Grease EP2, Wire Grease ST1.5, Super CSX Grease HD2, Super Synthetic Grease HD2, FG Grease ST2, Multi Grease WRM2, Complex HD2.5, Moly Grease 5 HD2 Multi Grease EP0 EAL, Multi Grease EP2 EAL, Marine Grease EP2 EAL, Universal Grease HD2 EAL, Wire Grease ST2 EAL, Offshore Grease HD2 EAL. LanoPro Coating 15 EAL, Coating 50 EAL, Coil 10 EAL, LanoPro Hydraulic 32 EAL, 46 EAL, 68 EAL, 100 EAL,
Grease Specifications: This product is made from composite metal soap thickening refined mineral oil, adding extreme pressure and anti-wear additive, anti-rust additive and anti-oxygen additive, etc. to the mineral oil. The lubricating grease has long service life at high temperature. Grease properties: Excellent high and low temperature performance, extreme pressure anti-wear property, water resistance, anti-rust property, mechanical stability and colloid stability. Grease Application: 1) Suitable for lubrication of friction parts of wheel bearings, chassis, motor pumps etc. of vehicles such as saloon cars, motor-buses and heavy load trucks under high speed, heavy load and other harsh conditions. Service temperature:-30180 -
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced downtime Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Premium greases are formulated with both Lithium, calcium soap mixed type
