Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
1> Feature : Adjustable 2> 90° wall mount hinge , 180° glass to glass 3> Glass thickness : 8 mm~12 mm 4> Max door weight : 36 kg (with 2 hinges) 5> Material : Solid Brass 6> Some models do have auto self-closing function within 25° at both sides 7> Mickey Mouse ear design.
1> Shower Glass Clip 2> Glass thickness : 6mm / 8mm / 10mm / 12mm 3> Material : Solid Brass Keywords: Shower Shelf Clips, Glass Clips.
1. Hand Rail Bracket 2. SS304, SS316 3. Satin Finish, Mirror Polished 4. Two caps plates with Nylon spacer-Diameter of the cap plates in 38mm,including one curve plate(suitable for 50.8mm) and one flat plate, with suitable counter sunk screws.
- For glass 10mm and 12mm thickness - Material : Available in SS304, SS316, SS316L - Dimensions 49*40*26 ( 165 grams), 62*44*27 ( 280 grams) - Mirror polished or Satin Stainless Steel.
1> Shower Knob. 2>Glass thickness : 1/4"~1/2", 6 mm~12 mm 3> Available in shapes: Square, cylindrical, conical etc. 4> Size: 28mm x 33mm, 30mmx30mm, 25mmx43mm etc. 5> Solid Brass, Zinc Alloy 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze. Keywords: Shower Door Knobs, Glass Door knobs
1> Shower Screen Connector / Shower Support Bar Bracket. 2> Glass thickness : 6 mm~12 mm 3> Size: 19mm / 22mm / 25mm Diameter. 4> Material : Solid Brass 5> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.
We have range of patch fittings suitable for 8-15mm tempered glass doors. 1. Our patch fittings are suitable for 10mm, 12mm tempered glass doors 2. Bottom Patch fitting. 3. Top patch fitting. 4. Side Over panel. 5. Top center 6. Inserts available for most of the floor springs. 7. Aluminum, SS304. 8. Polished Stainless steel, Satin Stainless steel,aluminium oxsilver ,Aluminum Gold color.
Solid brass with chrome plated one half has m6 304ss pin length 40mm with tapered end 22mm exposed balance inside hinge Other halve has hole for m6 pin, screw holes to be chamfered 4 screws mild steel m6 hex x 8mm long posi drive per hinge (anti vibration screws) Weight :90gms include ss pins
1. Available in different models 2. CNC machined precision pivot pins 3. Glass to Glass, wall to Glass shower door bi-fold hinges. 4. Glass thickness: 6 mm~10 mm 5. Max door weight: 23 kg (with 2 hinges) 6. Feature: 14mm Diameter hole required (non cutout),free swinging 7. Material: SS304 8. Closing angles 180°degree. 9. Straight edges, beveled edges, round edges. 10. Glass preparation- 14mm Diameter hole required. 11. Chrome plated, Brushed Nickel, Gold Plated, Oil Rubbed Bronze.
We supply: 1. Okume face and Okume back ,hardwood, Combi core MR-AA Grade Face,AA Grade Back in thickness 9mm,12mm,18mm 2.Okume Face and Canarium Back, hardwood combi core MR- A Grade Face , A Grade Back in thickness 9mm,12mm,18mm 3.Okume Face and Okume Back, Eucalyptus core MR+15% Melamine- AA Grade Face , AA Grade Back in thickness 9mm,12mm,18mm 4. Okume Face and Canarium Back, Eucalyptus core MR+15% Melamine - A Grade Face , BGrade Back in thickness 9mm,12mm,18mm We also can do plywood as per customer requirement.
We supply (Garjun) Keruing plywood with 100% core (Garjun)Keriung, face and back (Garjun)Keriung 1220*2440 in thickness 6mm,9mm,12mm,15mm,18mm... Grade: AA/AA Both sides SANDED. Glue: Melamine and MR
We supply Film Faced Plywood ( Shuttering Plywood) with Original Dynea film red brown, brown film (40/128 grade), 30kg, densified Film Faced (15mm to 12mm),11 ply, 12mm thickness (+/- .5mm), 10-15times repetition, 72Hours WBP Glue (Phenol Formaldehyde). Hot press-40minute heating and cooling cycle. Rubber wood + Poly core: 30Kg: Rubber wood + Full core: 30Kg: Eucalyptus + Full core: 38Kg: Benefits: more usages, more load bearing, less scaffolding, save on labor cost. Origin: India, China
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
We supply attractive variety qualitative range of Toilet and Bathroom accessories. Features of our Shower door hinges · CNC machined precision pivot pins · Dimension 90mmx 55mm (varies from hinge to hinge) · Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze. · Solid brass, Zinc as per customer choice. · Glass to Glass, wall to Glass shower door hinges. · Closing angles 90°, 135°,180°degree. · Straight edges, beveled edges, round edges. · Glass preparation- Mickey Mouse ear, square and round glass cut. · Glass thickness 8mm-12mm. · Glass door weight 35~36Kgs with two hinges. · Glass door weight 54Kgs with three hinges. · Also available in some models of shower door hinges with adjustable hinges. · Also available in auto- self closing for some models. · Also available in Bi-fold Hinge.
We supply 25mm, 26mm Plain Particle Boards for filling inside the doors. 2440x1220x26mm plain particle board shall weigh about 40kgs. We do particle board starting 9mm to 40mm and above for various purposes like lamination grade fully sanded on both faces, for routing purpose, furniture backing etc. 26mm(non sanded) :520Kg/m3 - E2 Grade 30 to 64mm- E1, High Moisture Resistance, Both Sides sanded 26mm(non sanded) :520Kg/m3 - E2 Grade 30 to 64mm- E1, High Moisture Resistance, Both Sides sanded, suitable for Fire door -tested to BS standard We can also adjust the density of board as per our customer requirement. Our plain particle boards are priced competitive. Please contact us for more details.
- Material : Solid SS304, SS316, SS316L ( also available in some models with hollow tube) - Shape at top of the spigot: Round/dome top or slopped as shown in the picture) - Also available in Square shape - Spigot no hole in the glass panel. - Spigot with base plate and cover ring - Dimensions: 48 x 155mm, 48*220mm, 48*300mm with base plate. - include the black gasket and stainless steel insert - Mirror polished or satin stainless steel.
- Solid stainless steel in SS304, SS316, SS316L - Satin Chrome, Satin Stainless Steel, Mirror polished - Standoff,Ø32mm x 20mm, Ø38 x 20MM, Ø38 x 30MM, Ø50 x 20MM, Ø50 x 30MM etc. - 10mm, 12mm glass - Screw rod length as per requirement, screw rod with hex insert if required. - Can supply with hole or without hole.
- PVC Seal with Magnetic strip - 135,180°degree - Flexible PVC with Rigid PVC - For 5,6,8,10,12mm tempered glass.
WC pan for high level cistern.
