PBTCA is widely used in the formulation of efficient scale and corrosion inhibitors and is one of the best performing products. It is also an excellent stabilizer for zinc salts. Widely used as a corrosion and scale inhibitor in circulating cooling water systems and oilfield water injection systems, it is particularly suitable for use in combination with zinc salts and copolymers. It can be used in high temperature, high hardness, high alkalinity, and situations that require high concentration ratios. PBTCA can be used as a chelating agent and metal cleaning agent in the washing industry. PBTCA is generally used in combination with other water treatment agents such as zinc salts, copolymers, organic phosphines, and azoles; If used alone, the dosage is 5-15mg/L.
EDTMPA is nitrogenous organic polyphosphonic acid, a part of cathodic corrosion inhibitor. Its corrosion inhibition is 35 times better than that of inorganic polyphosphate. It is miscible with water, innocuous and none pollution to environment, has good chemical stability and temperature tolerance. It shows excellent scale inhibition ability under temperature 200C. It can dissociate into 8 positive-negative ions, thus can chelate with many metal ions to form polymer reticulation complex, to destroy the normal crystallization of calcium scale. EDTMPS shows better antiscale effects to calcium sulfate and barium.
HEDP is an organophosphoric acid corrosion inhibitor It can chelate with Fe Cu and Zn ions to form stable chelating compounds It can dissolve the oxidized materials on these metals surfaces HEDP shows excellent scale and corrosion inhibition effects under temperatures of 250C HEDP has good chemical stability under high pH values is hard to hydrolyze and is hard to decompose under ordinary light and heat conditions Its acidalkali and chlo rine oxidation tolerance are better than that of other organophosphoric acids salt HEDP can react with metal ions in the water system to form a hexaelement chelating complex with calcium ions in particular Therefore HEDP has good antiscale and visible threshold effects When built together with other water treatment chemicals it shows good synergistic effects
Application
HEDP is used as scale and corrosion inhibition in circulating cool water system oil field and lowpressure boilers in fields such as electric power chemical industry metallurgy fertilizer etc In light woven industry HEDP is used as detergent for metal and nonmetal In dyeing industry HEDP is used as peroxide stabilizer and dyefixing agent In noncyanide electroplating HEDP is used as chelating agent The dosage of 110mgL is preferred as scale inhibitor 1050mgL as corrosion inhibitor and 10002000mgL as detergent Usually HEDP is used together with polycarboxylic acid
HEDP.Na2 is an organophosphonic acid corrosion inhibitor, it can chelate with Fe, Cu, and Zn ions, it can dissolve the oxidized materials, it has good scale and corrosion inhibition effects even under 250�ºC,it is stable under high pH value, not easy to be hydrolyzed, not easy to be decomposed under normal light and heat condition, its acid/alkaline and chloride oxidation tolerance are better than that of other organophosph- onic acids. HEDP.Na2 can form six-ring chelating compounds with metal ions in water system, Ca2+ in particular. HEDP.Na2 has good scale inhibition effects and obvious dissolution threshold effects. When usedwith other Water Treatment Chemicals, the synergistic effects is better.
Application scope and method of use
HEDP.Na2 is widely used in circulating cool water system, medium and low-pressure boiler, oil field water pipelines as scale and corrosion inhibitor in fields such as electric power, chemical industry, metallurgy, fertilizer, etc. In light woven industry, HEDP.Na2 is used as detergent for metal and nonmetal. In dyeing industry. The dyes the industry fixing agent in non-cyanide electroplating used as chelating agent.
Product Name: powder HEDP 90%
Other Names: 1-Hydroxyethylidene-1,1-diphosphonic acid
1.HEDP is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc..
2.In light woven industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry,
HEDP is used as peroxide stabilizer and dye-fixing agent;
3.In non-cyanide electroplating, HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent.
4.Usually, HEDP is used together with polycarboxylic acid.
HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330�ºC. HPMA has obvious threshold effect under high temperature (350�ºC) and high pH(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300�ºC with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement.
1. ATMP can be used in thermal power plant, recirculated cooling water of oil refinery, and recycle waterflood system of oilfield..
2. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline.
3. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent.
ATMP is usually used together with other organophosphoric acid, polycarboxylic acid and salt to build all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The recommended dosage is 5-20mg/L. As corrosion inhibitor, the recommended dosage is 20-80mg/L.
Chloric acid is also called "gold chloride" and "gold chloride tetrahydrate". The chemical formula is HAuCl4 �· 4H2O. The molecular weight is 411.85. Yellow needle shaped crystals. Poisonous! Corrosive. Easily soluble in water, soluble in ethanol, ether.
1. It can be used for partial gold plating of semiconductor and integrated circuit lead frames, printed circuit boards, and electronic connectors
2. Mainly used for gold plating, special inks, medicines, porcelain gold and red glass, etc., as well as raw materials for the production of various gold compounds, photographic industry and chemical reagents.
3. Used to prepare stable nano-scale and underivatized colloidal gold particles in the form of solution
Identification
Synonyms Poly (1-oxacyclopropane-2,3-dicarboxylic acid); PESA
Molecular Formula (C4H4O5) x
CAS Number 51274-37-4
Structure
Properties
Appearance colorless to amble transparent liquid
Solubility miscible in water
Stability stable under ordinary conditions
Specification
Item Specification
Appearance colorless to amble transparent liquid
Solid content 40.0% min
pH (1% water solution) 9.0-12.0
Density (20�ºC) 1.280 g/cm3 min
Application
PESA is a scale and corrosion inhibitor without phosphor and nitrogen. It has good scale inhibition and dispersion for calcium carbonate, calcium sulfate, calcium fluoride and silica scale. When combined with organophosphates, the synergism effects are obvious. PESA has good biodegradability. It can be widely used in circulating cool water system in case of high alkaline, high hardness and high pH value.
Packing and Storage
Packing: In 250kgs net plastic drum.
Storage: Keep tightly closed.
Safety Information
Detailed safety information is contained in each Material Safety Data Sheet, which can be obtained from our company.
Sodium dodecylbenzenesulphonate is an anionic surfactant that is commonly used in industrial and household cleaning products. It is a white to light yellow powder or granules that are soluble in water. It is derived from benzene, a widely used industrial chemical, through the process of sulfonation.
Purity:99%
Cleaning products: It is widely used as a detergent and emulsifying agent in cleaning products, including laundry detergents, dishwashing liquids, and all-purpose cleaners. It provides excellent cleaning performance and is effective in removing dirt, grease, and other organic materials from surfaces.
Textile industry: It is used as a wetting and dispersing agent in the textile industry to enhance the dyeing and printing processes.
Leather industry: It is used as a degreasing and emulsifying agent in leather manufacturing to remove impurities and improve the texture and quality of leather.
Paper industry: It is used as a wetting agent and dispersant in the paper industry to improve the strength and printability of paper products.
Metalworking fluids: It is used as a corrosion inhibitor and rust preventive additive in metalworking fluids to protect the metal surfaces from corrosion and rust.
Agriculture: It is used as a pesticide formulation solvent and surfactant, helping to improve the spread and effectiveness of the active ingredients in the formulations.
BTA Na can be absorbed on metal surface and form a thin film to protect copper and other metals. BTA Na can be used together with many scale inhibitors and fungi disinfectants in circulating cool water system, and it has good corrosion inhibition effect in circulating cool water system. The dosage of 2-4mg/l is preferred. BTAâ?¢Na can also be used as anti-discolor agent, coating additive and luboil additive.
Widely used in dimer acid, alkyd resin, synthetic fiber nylon 8 and 9, plastic plasticizer, printing ink, pesticide emulsifier, textile printing and dyeing auxiliaries, industrial solvents, detergents, metallic minerals flotation agent, remover, can also be used to make emulsified oil, metal processing oil, rust-proof oil, paint, oil is copy paper, pen, touch typing paper, detergent, laundry soap, softening agent, daily chemical and other industries.
Sodium Salt of 123Benzotriazole BTANa
CAS No 15217422
Molecular formula C6H4N3Na
Molecular Weight 14111
Properties
BTANa can be absorbed on metal surface and form a thin film to protect copper and other metals BTANa can be used together with many scale inhibitors and fungi disinfectants in circulating cool water system and it has good corrosion inhibition effect in circulating cool water system The dosage of 24mgl is preferred BTANa can also be used as antidiscolor agent coating additive and luboil additive
Specification
Items Index Appearance
Pale yellow to yellow transparent liquid
Active contentwt 500min
Density 20 gcm3 120 min
Package and Storage 200L plastic drumIBC1000Lcustomers requirement Storage for six months in shady room and dry place
Synonyms BTANa sodium salt of 123Benzotrialole12Aminoazophenylene123Triazaindene
The aqueous solution of hydrogen fluoride gas is a clear, colorless, fuming corrosive liquid with a strong pungent odor, easily soluble in water and ethanol, and slightly soluble in ether. Hydrofluoric acid is a weak acid with strong corrosiveness, which can strongly corrode metal, glass and silicon-containing objects.
It is generally produced in laboratories with fluorite (mainly composed of calcium fluoride) and concentrated sulfuric acid. It needs sealed in a plastic bottle.
The chemical industry is used to produce organic and inorganic fluorides (such as potassium fluoride, magnesium fluoride, uranium hexafluoride, calcium fluoride helium, fluororesin, fluoroplastic, fluororubber), dye synthesis, organic synthesis catalyst, and flame-retardant agent etc.
In glass processing and production, it is used for frosted bulbs and general bulb treatment, glassware polishing, glass instrument scales, glassware and mirror engraving and lettering.
As a cleaning agent for pickling of metal surfaces such as stainless steel.
Used in the atomic energy industry, for the production of elemental fluorine and fluorides, and also as catalysts and fluorinating agents.
Acetonitrile is an organic compound with the molecular formula CH3CN or c2h3n. It is a colorless liquid, highly volatile, with a special smell similar to ether, excellent solvent performance, and can dissolve a variety of organic, inorganic and gaseous substances. It has certain toxicity and is infinitely miscible with water and alcohol. Acetonitrile is an important organic intermediate, which can undergo typical nitrile reactions and is used to prepare many typical nitrogen-containing compounds. Acetonitrile can be used as a solvent for the synthesis of vitamin A, cortisone, carboamine drugs and their intermediates, and also as an active medium solvent for the manufacture of vitamin B1 and amino acids. It can replace chlorinated solvent. It is used in vinyl coating, fatty acid extractant, alcohol denaturant, butadiene extractant and solvent of acrylonitrile synthetic fiber. It is also used in fabric dyeing, lighting, perfume manufacturing and photosensitive material manufacturing.
Chemical analysis and instrumental analysis
Acetonitrile is an organic modifier and solvent used in thin layer chromatography, paper chromatography, spectroscopy and polarographic analysis in recent years. Since high-purity acetonitrile does not absorb ultraviolet light at 200nm ~ 400nm, an application being developed is as a solvent for high-performance liquid chromatography HPLC, which can make the analytical sensitivity as high as 10-9 levels.
Intermediate of synthetic medicine and pesticide
Acetonitrile can be used as an intermediate in the synthesis of various medicines and pesticides. In medicine, it is used to synthesize a series of important pharmaceutical intermediates, such as vitamin B1, metronidazole, ethambutol, aminopteridine, adenine and antitussive; In pesticides, it is used to synthesize pyrethroid insecticides, acetaminophen and other pesticide intermediates.
Semiconductor cleaning agent
Acetonitrile is an organic solvent with strong polarity. It has good solubility in grease, inorganic salt, organic matter and polymer compounds. It can clean grease, wax, fingerprints, corrosive agent and flux residues on silicon wafers. Therefore, high purity acetonitrile can be used as semiconductor cleaner.
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m�²/sec (max.)
- Ph Value : 6.5 to 8.5
V3 Borewell Submersible Pumpset
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.
Salient Features
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series
- 20 Mtr. Head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust
loads
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
- Fully SS Pumps are available
Specification
Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph
- Power Range : 7.5 kW to 75 kW (10 HP to 100 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Thrust Load : 7.5 kW -30 kW -10000 lbs
- Speed : 2880 RPM
- Head Range : 12 Mtr. To 440 Mtr.
- Discharge Range : 2400 LPM to 300 LPM
- Outlet Size in Inch : 4.0" & 5.0"
- Degree of Protection : IP 58
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : Star Delta (SD)
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure and rigidly locked in stainless steel stator shell.
Salient Features
- Cast iron casting bowl and SS-410 grade impeller in mix flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Special designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures services feasibility
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps
Specification
- Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW
- Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP)
- Version : Three Phase 350 to 415V, 50Hz AC Supply
- Speed : 2880 RPM
- Head Range : 18 Mtr. To 650 Mtr.
- Discharge Range : 1860 LPM to 55 LPM
- Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0
- Degree of Protection : IP 58
- Direction of Rotation : Electrically Reversible -3ph
- Thrust Load : 11.2 kW -37.3 kW -8000 lbs
- Minimum Cooling Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
V6 Borewell Submersible Pumpset
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure.
Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade
Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.)
6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
