CAS No: 1341-49-7 EINECS No: 215-676-4 Molecular formula: NH4HF2 Molecular weight: 38.0443 Industrial Ammonium Hydrogenfluoride [Molecular Formula] NH4HF2 [Molecular Weight] 57.04 [Properties] White needle-like crystal, easy deliquescence and agglomeration, soluble in water and slight soluble in alcohol; decompose to ammonia and ammonium bifluoride in heat water, decompose to ammonia and hydrogen fluoride when being heated, its aqueous solution is acidic and can corrode glass. [Uses] 1. Glass etchant, preservative, disinfectant, solvent for metal beryllium made of beryllium oxide, analytical reagent and surface treatment agent for silicon steel plate. 2. It is also used as an oxidant for the manufacture of ceramics and aluminum-magnesium alloys, as well as a cleaning agent for boiler feed water systems and steam generation systems. 3. Acidification treatment of oilfield sand. 4. Organic synthetic fluorinating agent. 5. Plating solution. 6. Reagents for extracting rare elements. 7. Paint industry
Drawworks Brake Band Product Description Drawworks Parts: Air Valves, Brake Bands, Brake Blocks, Brake Flanges, Brake Hardware, Bushings, Catheads (Makeup / Breakout), Cathead Parts, Chains, Clutches, Clutch Friction Linings, Clutch Air Diaphragm s, Drum Assembly. NATIONALOILWELLCONTINENTAL EMSCOIDECOGARDNER-DENVER 370/370-E500C-3-II900500/500-E 610/610-E660/660-EC-3-III1200700 80-B/80-UE700/700-EC-2-II1700800 110-M/110-UDBM760/760-EC-2-III21001100 110-UE/110-UDBE840-EC-1-II30001500 1320-M/1320-UDBM860/860-EC-1-III 2100 1320-UE/1320-UDBEM-2000D-3-II 3000-E 1625-M/1625-UDBME-2000D-3-III 1625-DE/1625-UDBEM-3000/M-3000-UDBD-2 2040-UDBEE-3000/E-3000-UDBD-1
Place of origin: shaanxi china (mainland) brand name: baohao model number: jc15db, jc30b, jc40db, jc50b, jc50db, jc70db Type: drawworks machine type: drilling equipment certification: api Material: alloy steel processing type: other use: well drilling Usage: oil well condition: new Export package.
It is a white crystal with corrosive to skin and toxic. It is soluble in water and methanol, slightly soluble in ethanol, insoluble in propanone and liquid ammonia. When it is in hot water decomposition will occur to release ammonia and ammonium bifluoride. It is white or colorless transparent orthorhombic crystal at room temperature, with a slightly sour taste. It is easily deliquescent when heated or in hot water and decomposes into ammonia and hydrogen fluoride. Decomposed in hot water, the aqueous solution is strongly acidic. It is obtained by neutralizing anhydrous hydrofluoric acid with liquid ammonia. Mainly used as glass etching agent, wood and wine preservative, disinfectant, zirconium drops reagent and fiber mordant and reagents to extract rare elements. Chemical reagents, glass etchants (used in conjunction with hydrofluoric acid), disinfectants and preservatives in the fermentation industry, solvents for beryllium oxide to beryllium, surface treatment agents for silicon steel sheets, and production of ceramics, magnesium alloys, aluminum alloys, etc., boilers Scale removal and elution of feedwater systems and steam generation systems, acid treatment of oilfield sands, catalysts for alkylation and alkylation of isomerized components.
Oil tools, rapeseed oil, tripe, ginger, garlic, chili pepper, onions, hibiscus flower, cray fish, yam, bitter cola, kola nut, cocoa.
Overview Products Description The Composite Bridge Plug is made from composite material and easy to drill out. It is mainly composed of mandrel, rubber, slips, cones, protection bowls, release/start pins, lower sub and so on. The composite bridge plug is mainly used for provisional plugging in oil and gas well, and fracturing construction Working principle The opposite power produced by setting tool (wire line or transmitting hydraulic pressure in oil tube) acts on the lower sub, shears the starting dowels and exerts compressive force on rubber through cone. Inside the tension range slips dehisce and inlay the in wall of the casing, rubber expand to the in wall of the casing and seal up it, finish setting. When the tension rises to the shear rating, the starting dowels be sheared and the setting tool separates from the bridge plug, finish releasing. After taking out the setting tool, the frac ball that be put into the well will work hermetically with the head face of the mandrel. The plug can be quickly drilled out under the necessity of the after steps Drilling out Recommend the use of special milling tools. Recommend rotation rate: 60~150rpm, bit weight: 5~15kN, viscosity of drilling plug fluid:15~30mPas and minimum cyclic velocity: 36.6m/min, to make sure the debris circulates out. After the preparation is done, start the screw drill and drill slowly into the bridge plug. Ensure continuous drilling speed by applying drilling pressure. The torque added to the drilling tool should not be greater than the recommended value. Excessive drilling pressure increases the friction resistance of the pipe string and results in large pieces of debris which must be salvaged separately. Specification Type DTJ92 DTJ100 DTJ112 DTJ145 Suitable casing size 9.5-13.5lb/fï¼?99.56mm-103.88mmï¼? 13-18 lb/fï¼?108.62mm-114.14mmï¼? 17-23lb/ft 118.62mm-124.26mm 26-32lb/ft 154.78mm-159.42mm Max OD 3.62" 92mm 3.93 (100mm) 4.4" 112mm 5.68" 144mm Min ID 1.1" 28mm 1.8 (30mm) 1.5 38mm 1.14" 45mm Total length 26" 660mm 26" 660mm 26" 660mm 39.4" 1000mm Working pressure 10000psi 70MPa 10000psi 70MPa 10000psi 70MPa 10000psi ï¼?70MPa Working temperature 300 150 300 150 300 150 300 150 Seating load 120-130kN 160-180kN 160-180kN 160-180kN
It is applied to the oil well containing corrosive medium such as salt sulfur, carbon dioxide and bacteria and the wells with fewer sands.Comparing with conventional tubing pump,The API Tubing Pump has better performance in corrosion resistance & antifriction aspects.Plunger of it is nickel plated on alloy base,inside wall of barrel is plated hard cadmium,key parts,such as valve hood,valve ball,are made of materials with excellent mechanical performance and corrosion resistant property.Compared with conventional pump,the series of pump has a longer working life. Subsurface pump Per API Spec.11AX
The cementing plug is used to separate the cement slurry from the mud. It can prevent the mud from blending into the cement slurry to influence the cementing quality. Structure: conventional cementing plug & special cementing plug Conventional cementing plug is divided into top plug and bottom plug. Special plug has top/middle/bottom plug used in two-stage cementing, drill pipe plug and hollow plug used in drilling liner cementing and composite plug used in composite casing.
The Composite Bridge Plug is made from composite material and easy to drill out. It is mainly composed of mandrel, rubber, slips, cones, protection bowls, release/start pins, lower sub and so on. The composite bridge plug is mainly used for provisional plugging in oil and gas well, and fracturing construction Working principle The opposite power produced by setting tool (wire line or transmitting hydraulic pressure in oil tube) acts on the lower sub, shears the starting dowels and exerts compressive force on rubber through cone. Inside the tension range slips dehisce and inlay the in wall of the casing, rubber expand to the in wall of the casing and seal up it, finish setting. When the tension rises to the shear rating, the starting dowels be sheared and the setting tool separates from the bridge plug, finish releasing. After taking out the setting tool, the frac ball that be put into the well will work hermetically with the head face of the mandrel. The plug can be quickly drilled out under the necessity of the after steps Drilling out Recommend the use of special milling tools. Recommend rotation rate: 60~150rpm, bit weight: 5~15kN, viscosity of drilling plug fluid:15~30mPas and minimum cyclic velocity: 36.6m/min, to make sure the debris circulates out. After the preparation is done, start the screw drill and drill slowly into the bridge plug. Ensure continuous drilling speed by applying drilling pressure. The torque added to the drilling tool should not be greater than the recommended value. Excessive drilling pressure increases the friction resistance of the pipe string and results in large pieces of debris which must be salvaged separately.
A steel sucker rod is one of the important equipment of oil field.Can provide seven kinds of the level of sucker rod,including C, K, D, KD, HL, HY andC, K, D sucker rod press design and manufacture standard of API Spec 11 B, KD, HL, HY grade rod design and manufacture according to standard SY/T5029-2006, KH level rod according to standard within the company. Grade C sucker rod is mainly used for light, medium load, no corrosion or corrosion shallow Wells or in deep well pumping, material is carbon steel or manganese steel. Grade D sucker rod is made of high quality alloy steel, after heat treatment with high strength, plasticity is good, long life and other characteristics, it is suitable for light when there is no corrosion or corrosive medium in the deep Wells under the environment of use. Grade H(HLandHY) sucker rod is made of high quality alloy steel manufacturing, have the characteristics of ultra high strength, used in deep well, big strong pump used in production. And K and KD sucker rod with different content of Ni Cr - Ni - Mo high quality alloy steel manufacturing, have anticorrosive, resistance to corrosion function, respectively applicable to strong corrosion of shallow, middle and deep Wells.
1.TheTubing Centralizer is designed to be run in the tubing string to keep the tubing centralized which may help in preventing premature wear of the casing and tubing. 2.The Tubing Centralizer can be directly above the pump for the vibration and harmonics dampening effects and other units can be installed further up the tubing string to provide the tubing and casing protection. 3.The Tubing Centralizer has full tubing ID specifications and is available for a large variety of casing sizes and tubing connections
The TUF swab cup is a flexible, synthetic rubber cup with spring steel reinforcing wires for heavy loads but is flexible enough for light or medium loads. The TUF swab cup is an all-purpose, synthetic rubber cup containing strong, flexible spring steel reinforcing wires. Technical Parameters: Tubing O.D. LBS./Foot Tubing Min I.D. Nominal Tubing Size Wire Cup 2.375 4.6 1.995 2â?? PW2R 1.935 2.375 4.6 1.995 2â?? PW2R 1.915 2.875 6.4 2.441 2-1/2â?? PW2-1/2R 2.370 2.875 6.4 2.441 2-1/2â?? PW2-1/2U 2.340 2.875 7.9 2.323 2-1/2â?? PW2-1/2HS 2.220 2.875 8.7 2.259 2-1/2â?? PW2.259 2.050 3.50 8.5-10.2 2.992 3-1/2â?? PW3-1/2 2.920 4.50 10.4-12.5 4.090-3.958 4-1/2â?? PW4-1/2C 3.890 5.50 13.5-15.5 5.044-4.950 5-1/2â?? PW5-1/2C 4.920
Sucker Rod Coupling The sucker rod couplings are used for connecting sucker rods, polished rods and sinker bars. ** The main types of sucker rod couplings are sucker rod couplings, polished rod couplings and sub-couplings. ** All of the three types have two classes: class T(through-hardened)and class SM (sprayed metal). **Material: carbon steel, alloy steel. **Specification:5/8", 3/4", 7/8"1", 1 1/8"
Centralizers are mechanical devices that prevent casing from contacting the well bore wall. A continuous 360-degree annular space around casing allows cement to completely seal the casing to the borehole wall. Eneroil Centralizers are renowned in the Oil & Gas industry for their standard quality and performances. Our range of Casing Centralizer includes: 1. Bow Spring Centralizer 2. Single Piece Centralizer 3. Solid Rigid Centralizer 4. Roller Centralizers 5. Thermoplastic Centralizers Based on the current challenges of well operations, our application engineers have designed cementing equipment that suits larger variety of well applications and this range includes Welded, Non-welded, Rigid, Semi-rigid, Roller centralizers, Bow type centralizer along with our latest masterpiece - Single Piece centralizer & Thermoplastic centralizer. Eneroil manufactured Casing Centralizers are mechanical devices that prevent casing from contacting the wellbore wall for all kind of well cementing jobs.
The couplings produced by our company are good at stable quality which the technical parameters are completely complied with the requirements of API5CT and API5B latest standards. Meanwhile, the company has equipped with more than 30 sets CNC threading machines, is able to produce variety of steel grade couplings include STC, LTC, BTC and NU, EU threading couplings. We also supply permium thread products by customer's request 1.Grade: J55, K55, N80-1, N80-Q, L80, C90, P110 2.We also supply permium thread products by customer's request 3.Size: tubing coupling from 1.9" to 4-1/2", Casing coupling from 4-1/2"to 13-3/8" 4.Type: NU, EU (tubing coupling), STC, LC, BTC (casing coupling). 5.Surface treatment: Whole phosphating, or inside phosphating and outside coating 6.Packing: By carton, wooden case, wooden pallet, or by requirements of customers Otherwise, our company manufactures and sells casing and tubing, threader protector etc. We always do business based on the principle of equality and mutual benefit, we provide the high quality and competitive price products
Api oilfield power swivel Power swivel is the device installing on the derrick of servicing rig, to provide rotating power. Except the use for such workover jobs as casing milling, milling, drilling cement plug and bridge plug and fishing, it is also used for sidetracking drilling, drilling open hole and coring. The product is designed and manufactured according to api 8c specifications.
Property It's a proven extensively used drilling fluid additive with many fine properties. Oil asphalt is basal raw material. It appears brown in easy breakable pieces or fluidized powder. Its density is 0.989g/cm3. Technical data Itemsindexes Water soluble content %=70.0 Oil soluble content %=20.0 Hthp. Fl reducing rate %=40.0 Ph8-10 Moisture %=10.0 Feature They can emulsify fresh water or sea water with oil, depress the solid expansion of drill chips , control hthp fl, produces thin and tenacious mud cakes, helps maintain low shearing rate under hthp, cleans and stabilizes well holes that have a great deal of collapsing shale. stabilize shale stratum reduce rotative torque and prevent jamming substitute of oil, including crude oil, waste engine oil and diesel oil depress the solid expansion of drill chips control hthp fl produce thin and tenacious mud cakes Recommended quantity to be added: 1-4% Package & storage Packaging and transport sacked with three packages, 25kg/sack. Be kept away from moisture and possible damage of the packages in transportation. Stored in cool and dry situation and storage life is two years.
Specifications 1) Anionic Oilfield chemical; 2) MW:16 million; 3) Inherent content: 88%; 4) ISO 9001: 2000 Standard; 5) HS: 3906901000. Anionic phpa;anionic pam;anionic polyacrylamide; anionic water treatment chemicals. Package: the solid product is packed in kraft pape Delivery lead time:3days Minimum order:5 Metric Ton/Metric Tons Supply ability:6000 Metric Ton/Metric Tons per Year.
Astm stud & nuts for oilfield equipments . Jobwork of api oilfield components as per 6a , 16a standards. Machining of automobile & industrial components Na
API 5ct J55 K55 L80 N80 P110 C95 BUNDLES