Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.
Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.
Sponge Iron Fines
IRON ORE PELLETS Fe 64% monthly volume 50,000 mt. Full specification is available on request, Iron Ore Pellets: Pellets are small balls of iron ore used in the production of steel. They are made with technology that uses the powder that is generated during the ore extraction process, once considered waste. The pellets are used in the production of steel which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more. Product Type: IRON ORE PELLETS Fe (T) 64 % Si02 1.150 % Fe0 0.75 Max Ti02 0.021% Al2O3 0.319 % Ca0 1.170 % P 0.032 % S 0.031 % V205 0.004 % Cu 0.057 % N2O 1.290 % Mg0 0.069 % CCS 309 Size 16-19 mm - 7 % 09-16 mm -91 % 06-09 mm 2 % Tumbler Index- for above 6.3 mm 96.2 % - 95 % min Abrasion Index â??for 0.5 mm 3.8 % - 4 % max Sticking Index 950 deg C 20.1 % Bulk Density 2.17 % Compression Strength 270 Kg / Pellet / 150 kg / pellet Fines below 5mm (-) 5 mm 3 % max Reducibility index 55-65 % . NOTE: Interested parties please contact us with your LOI
Iron Ore, Manganese Ore,Chrome Ore, Iron Ore Lumps, Iron Ore Fines, Mill Scales, Copper Ore, Lead Ore. We sell iron ore, iron ore fines, iron ore lumps, hematite iron ore, magnetite iron ore with vairous grades, if you have such demand, pls feel free to contact us. Iron ore is the source of primary iron for the world's iron and steel industries. It is therefore essential for the production of steel, which in turn is essential to maintain a strong industrial base. Almost all (98%) iron ore is used in steelmaking. Iron ore is mined in about 50 countries. The seven largest of these producing countries account for about three-quarters of total world production. Australia and Brazil together dominate the world's iron ore exports, each having about one-third of total exports
HBI is a briquetted form of direct reduced iron with a high iron content (>90%). The chemical composition of the HBI we supply is consistent, with low levels of harmful impurities, such as phosphorus and sulphur. It is free from other harmful elements, such as copper, nickel, and any non-metallic compounds.
We have a unique iron ore resource footprint with large, high-quality resource bases in South Africa and India. Demand for iron ore globally is largely dependent on the state of the steel industry worldwide and, more specifically, on that of the steel manufacturing sector in China. Brat supplies leading quality lump ore and also produces premium fine ore from the mines of its associate company in Goa, India.
This premium-grade iron ore offers a balanced composition, meeting industrial standards for use in steel manufacturing, construction, and other metallurgical applications. It is processed to provide optimal purity and mineral content, ensuring consistency in quality for various industrial uses. Applications: This iron ore is suitable for: Steel manufacturing Metallurgical applications Construction materials Advantages: High purity and minimal impurities Consistent composition for predictable processing outcomes Low levels of undesirable elements like sulfur and phosphorus
Size Range 015 mm to 63 mm Moisture Content Typically 8 12 Bulk Density 20 to 25 tonnesm Angle of Repose 35 to 40 Specific Gravity 45 to 50 Porosity 35 to 40 Surface Area High Due to fine granularity Color Reddishbrown Abrasion Index Low Depends on mineral content Flowability Poor due to fine size
TOPGLO CORPORATION: Your Trusted Strength in Iron Ore Supply We TOPGLO CORPORATION take full pride of ourselves on being a leading global network of mining groups, specializing in the supply of high-quality iron ore ranging from Fe 60% to 67%. With a monthly shipment volume of approximately 1.2 million tons, we ensure that every step from production to inspection and execution is handled with the utmost care and precision. Quality Assurance: We maintain stringent quality control measures to ensure that our iron ore meets the highest standards. Customer Satisfaction: Our commitment to excellence ensures that each order is executed to the complete satisfaction of our clients. Get in Touch! For all your iron ore requirements, do not hesitate to reach out to us. We are here to serve you with dedication and professionalism.
We Topglo Corporation are a trusted name in the export of premium metals, minerals, and stones for over three decades. We specialise in supplying high-quality iron ore, available in both fines and lumps, with Fe content up to 67%. Our iron ore is sourced from our own mines in India and from our funded mines in Africa and South America, ensuring a consistent and reliable supply. We can deliver volumes ranging from 300,000 MT to 700,000 MT monthly, tailored to meet your specific requirements. Our extensive experience and commitment to quality have made us a preferred partner in the industry. We would be delighted to explore potential opportunities to collaborate and meet your mineral and metal needs. Please feel free to reach out for further information or to discuss how we can support your business.
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Iron ore from India 57% grade, Iron ore from South Africa 65% plus grade.
Product: Iron Ore 50-52% Grade Origin: Kazakhstan Quantity: up to 50 000 MT First Order: Advance T/T for trial order Trial order is required
Nickel sludge, zinc ash, copper ore, lead ore, chrome ore, manganese ore, bauxite ore, iron ore, iron ore pellets, tin ore, ir64 rice, ir 64 5% broken rice, zinc ash, raw red chilli, chrome ore, iron skull, 1121 sella white basmati rice, 3 ply surgical masks.
High-Grade Iron Content: Our iron ore contains between 58% and 64%, ideal for steel manufacturing and industrial applications. Reliable Supply: We maintain a large production capacity to ensure consistent, high-volume supply. Eco-Friendly Mining Practices: Our mining processes adhere to sustainable practices, minimizing environmental impact. Why Choose Us? Direct Source: Bypass intermediaries and get the best price with direct shipping from our mining sites. Strategic Location: Based in the Philippines, we can efficiently deliver to major Asian markets such as China, Japan, and South Korea. Customized Logistics: Packaging in unsealed plastic bags allows for flexible handling, ensuring the ease of bulk transport.
Gypsum rocks, gypsum powder, rock salt (industrial salt and deicing salt), food grade salt, sodium bicarbonate, limestone, white limestone (marble chips), sulphur (granular, lumps).
Iron oxide, zinc product, aluminum, rutile, ilmenite, struverite, monazite, etc.
We have about 2,000MT to 2,500MT of Mill Scale from our Melt shops Item: Billet Mill Scale. Payment: As Cash In Advance. Packing: Loose. Present Stock: Around 2,500MT. POL Saudi Arabia
Hello All! My seller is offering Iron Ore. I am DIRECT to the SELLER. I am on the sell side. Grade: 70% (some is up to 80%) Price: $95 per MT ORIGIN: Africa FOB ONLY!!!! 120m MT ---- 1 Million MT Per Month for 10-year contract. Please message me via WhatsApp (313-622-5485) for further discussions as soon as possible. Our company is fully transparent and will provide any information needed. We Require an LOI before moving forward in the process. We are looking for serious buyers who want to jump on this opportunity while it lasts. This will move QUICK! Thank you. Kind Regards, Hassan
