EQUINAS TFO 60u High Quality Un-Inhibited Transformer Oil EQUINAS TFO 60u is a high-quality un-inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
We has developed DST Insulating Oil Dielectric Strength Tester according to International standard IEC156, which is developed especially for measurement of insulating oil breakdown voltage. The dielectric breakdown is an indication of the oil ability to withstand electrical stress. The oil sample is placed in a test cup and an AC voltage is impressed on it. The electrodes are two discs, exactly 1 in. in diameter and placed 0.10 in. apart. The voltage is raised at a constant rate, until an arc jumps through the oil between the two electrodes. The voltage at which the arc occurs is considered the dielectric strength of the oil. DST automatic Insulating Oil Dielectric Strength Tester is unique in the market due to its functionality and the excellent user benefit in comparison to costs. The transformer oil tester provides delivers clear and reliable measurement results. It is no longer necessary to send samples to the laboratory. Environmental and transport influence on the samples are minimized. Due to its design, the tester is particularly handy, easy to operate and especially excellent to use under tough ambient conditions. By proper programming, DST Insulating Oil Dielectric Strength Tester has got functions of auto boosting, step down, stirring, display and print out. Portable type is available for performing both levels of this test in the field.
As a general rule, The purer the sand, the clearer the products Silicon and oxygen are the earth's two most abundant elements and together they make silica, one of the earths three most common rock forming minerals. Akshar Minerals Silica sand is high purity natural crystalline silica. It is inherently bright, white, low in moisture and chemically inert in nature. Basically, It is made up of two main element Silica & Oxygen. Silica sand is made up of Silicon Dioxide. There are number of different uses of silica sand in the industrial and commercial sector, from golf courses to glass making . The chemical formula of Silica Sand is SiO2 Characteristics : High Purity Weather Resistant White Appearance Naturally Hard Controlled Particle size Chemically Inert Applications Akshar Minerals Silica sand is used depends on physical, chemical and mechanical characteristics such as grain size, shape color, structure and distribution as well as refractoriness strength and stability. There characteristics can differ depending on how mineral is processed after it is mined. This product gets easily mixed and can be used for high temperature applications like flat glass, furnace tubes and many more due to its excellent thermal expansion, hardness. It yields improved durability and burnish resistance. We make for all type of application in the industries like Glass industries, Sodium Silicate Industry, Golf course & Sport Ground, Adhesive and sealant, Rubber industry, Texture Wall Paint, Sand Blasting, Agro pesticide, Cosmetic industry, Soap & Detergent, Filtration Media, Power Plant & Petroleum, Construction Chemical Industry, Plastic, Fertilizer, Paint, Ceramic, Insulation, Foundry, Ramming Mass, Steel Industry, Landscaping, GRC & GRP Industry, Oil & Petroleum Industry, Oil Exploration & Oil Drilling.
HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %
Silica sand is a primary component in the manufacturing of glass. It is a very important raw material for standard and special glasses. The chemical purity of silica sand is the principal determinant of strength, colour and clarity. It is used to produce flat glass for building and automotive uses and for container glass that stores food and beverages. It reinforces glass fibres and required for the production of fibreglass insulation. It is applied in speciality glasses that include test tubes, scientific tools, television and CRT monitors, and also in incandescent and fluorescent lamps. Calcium silicate bricks For manufacturing calcium silicate bricks, silica sand is mixed with high calcium lime with a sand to lime ratio of 10 or 20. These bricks contain good regularity, smooth faces, and sharp corners with a wide variety of strength. The durability of calcium silicate bricks is similar to concrete and is not resistant to sulphur containing environments. Silica sand for water filtration Silica sand is an effetive filtration bed in the removal of contaminants in both processing of wastewater and in the filtration of the drinking water. Silica sand neutralizes the acidic elements to maintain optimal pH balance in water filters. As it is chemically inert, it will not react when exposed to acids, contaminants, volatile organics or solvents. Metal Casting & Production Silica sand is an essential part of the production of steel, ferrous and nonferrous foundry industries for de-oxidation and grain refinement. For obtaining desired internal or external shapes, metal parts are cast in silica sand. It is a preferred choice for castings that involve cast iron, steel, titanium and also used to clean the casting surfaces. Paints & Coatings Silica sand constitutes of high-performance properties such as brightness, reflectance, oil absorption and colour-consistency. These properties help to improve the overall appearance and durability of industrial and architectural paints and coatings. Its low oil absorption nature improves finishing colour that makes a durable coating rich in pigments. Silica fillers improvement retention and also provide resistance to dirt, mildew, weathering and cracking
Products Description Adipic acid is an important organic dibasic acid with the structural formula HOOC(CH2)4COOH. It can undergo salt-forming reaction, esterification reaction, amidation reaction, etc., and can be polycondensed with diamine or diol to form high molecular polymer. Adipic acid is an industrially important dicarboxylic acid. It plays an important role in chemical production, organic synthesis industry, medicine, and lubricant manufacturing. Its output ranks second among all dicarboxylic acids. Application 1. Adipic acid is mainly used in the production of nylon fibers and engineering plastics. 2. It is also widely used in the production of polyurethane and other esters, most of which are used in the production of PU, shoe sole slurry, polyurethane foam, etc., and a small part is used as advanced lubricating oil. 3. Higher esters of adipic acid can be used as plasticizers for polyvinyl chloride and its copolymers, and natural synthetic rubber. 4. A large amount of adipate is used in polyvinyl chloride for food packaging, film and insulation. 5. Adipic acid is also used as an acidulant for various foods and beverages.
Discover serenity and balance with the calming Cypress Oil. Firstly, Cypress Oil, derived from the Cupressus Sempervirens tree, offers a crisp and refreshing aroma. It is often associated with relaxation and balance, making it an excellent choice for aromatherapy. This oilâ??s scent is believed to ease the mind and create a sense of clarity. Topically, it can be applied to soothe muscles and joints, offering relief from discomfort. Our oil is 100% pure and natural, extracted through steam distillation to ensure the highest quality. It is thoughtfully packaged in a dark glass bottle, protecting it from light exposure and preserving its freshness. Let the enchanting scent of this oil accompany you on your journey to well-being. Package Size 100 GM, 500 GM, 1 KG, 5 KG, 10 KG, 20 KG, 25 KG Product Specifications Botanical Name: Cupressus Sempervirens Plant Part Used: Twigs, Stems And Leaf Origin: India Spec Range: Alpha Pinene 40-50%, Delta 3 Carene 20-25% VOC: 100% Solubility: Alcohol Soluble Extraction Method: Steam Distillation Appearance: Coloreless To Pale Yellow Odour: Woody And Spicy Aroma Specific Gravity: 0.860 to 0.891 Refractive Index: 1.4700 to 1.4821 Optical Rotation: +4 -+29 Natural: Yes Food Grade: Yes FDA: Yes FSSC: Yes Kosher: Yes Halal: Yes Applications: Aromatherapy, Perfumery, Skin Care, Respiratory Health, Circulation Support, Mood Enhancement, Massage Therapy, Hair Care. CAUTION: It is meant only for external use. Do a patch skin test before applying it to your skin. Dilute it before topical application. Avoid direct exposure to sunlight. Pregnant women should consult a doctor before using it.
Sunflower oil is made of sunflower seeds. Quality of the future oil significantly depends on the quality of seeds, level of oil content, humidity and maturation period. Unrefined sunflower oil is purified mechanically (settled and filtrated) in most cases. Unrefined oil contains maximum quantity of vitamins and phospholipids. Unrefined oil is rich of vitamins: (tocopherol), (linoleic and linolenic unsaturated fatty acids), (calcitriol), (retinol); it is also very healthy in raw form, for example as fresh salads dressing. Refined oil perfectly suits for frying and baking, it neither changes the taste and smell of products. FLEXITANK Flexitank is a flexible container which is used for the transportation and storage of liquid food, loose and bulk cargoes. Transportation is carried out by the 20 ft dry cargo container, resulting in savings, since only the delivery costs are paid. TANK-CONTAINER The tank-container is a container consisting of a frame and a tank of 26 - 35 m. BARREL AND MULTIBOX The multibox is a plastic container, intended for transportation and storage of safe liquids. TANK Our tank vehicles of the European production are made of special food stainless steel. All the tanks have thermal insulation that allows maintaining the desired temperature, and if necessary, you may heat or cool the argo during transportation.
Electrical Submersible Pump Power Cable is divided into round cable and flat cable, the cable consists of conductor,insulating layer, jacket and cable armor. according to the different requirements of power and condition of oil well, there are different specifications of cable. there are 90â??,120â??,150â??,180â??,204â??,232â??and 250â??according to the temperature rating; ther are 3kv and 6 kv according to voltage rating. To prevent it from being damaged, the galvanized steel armor,stainless steel armor or monel armor for corrosive medium.
Flexible fireproof cables are composed of copper stranded wires, mineral compound insulation, and mineral compound sheaths. This kind of cable has non-combustible, smoke-free, non-toxic and fire-resistant characteristics. The structure of the flexible mineral insulated cable adopts a flexible structure and materials that are made of mineral compounds, which make up for the defects of hard structure, flammability, and toxicity. It also has some advantages that other cables cannot have, such as: fire resistance, large current carrying capacity, Impact voltage resistance, mechanical damage resistance, halogen-free, non-toxic, explosion-proof, waterproof, corrosion resistance, long life, safety, overload resistance, high temperature resistance, low cost, etc. Flexible fireproof cables have an important role in protecting lives, materials, and information security. They are used in trunk lines, fire lines, escape rescue systems, such as emergency lighting, fire monitoring, alarm systems, elevator systems, smoke exhaust systems, and control lines, etc. Flexible fireproof fireproof cables used in trunk lines, fire lines, escape and rescue systems, such as emergency lighting, fire monitoring, alarm system, elevator system, smoke exhaust system, and control lines, etc. Flexible fireproof fireproof cables used in Public buildings: high-rise buildings, underground buildings, hotels and restaurants, hospitals, schools, business centers, government affairs centers, department stores, large supermarkets, logistics warehouses, financial institutions such as banks, securities and insurance, post and telecommunications centers, power control rooms, substation rooms, museums, memorials and other historic buildings. Flexible fireproof fireproof cables used in Infrastructure: airport terminals, stations, hub centers, ports, subway systems, Bridges, tunnels. Flexible fireproof fireproof cables used in Industry: coal mining, coal chemical industry, oil field mining, petrochemical industry, oil refinery, metallurgical industry, iron and steel industry, shipbuilding industry, aerospace, electric power industry, pharmaceutical industry, glass industry, paper industry, military system. Flexible fireproof fireproof cables used in Fire prevention, explosion prevention, high temperature places: oil depot and gas station, natural gas transmission and compression station, garden landscape, historic sites, wood structure buildings
The characteristics of the new type of ocean power cable are as follows: the cable core is composed of insulated cable core and waterproof filling rope twisted together; An inner sheath layer, an armoring layer and an outer sheath layer made of polyolefin are successively arranged on the outer core of the cable from inside to outside. With high softness and according to the characteristics of sea salt fog, strong light, wind and rain, easy to mildew. The above environmental factors are fully considered in the selection of cable raw materials. The cable has the environmental requirements of anti-salt spray, anti-ultraviolet light, anti-seawater and anti-mildew under the condition of meeting its own requirements. It is suitable for military power distribution network or industrial facilities in Marine environment. Its remarkable technical characteristics are high mechanical strength, oil resistance, mud resistance, uv resistance, bunching flame retardant/fire prevention, high temperature resistance, low temperature resistance, etc. The cable adopts the structure design of power core, communication and data transmission cable integrated.
Sacha inchi nut oil is extracted by pressing from the seeds and flesh of the fruit of the Plukenetia volubilis, or pracaxi, a tree native to the area surrounding the Amazon River. Sacha Inchi oil has with approximately 50% a very high content of the omega 3 fatty acid alpha-linolenic acid, which makes it comparable only to flaxseed oil. Sacha Inchi oil has a very high content of Tocopherols (176â??226 mg/100 g) which consists predominately of gamma-Tocopherol (50%) and delta-Tocopherol. PRODUCT DESCRIPTION Scientific Name : Plukenetia Volubilis Linneo Extra virgin sacha inchi oil is made using a careful cold pressing process, ensuring all the seed properties conservation. Rich in polyunsaturated fatty acids: 48% Omega 3, 38% Omega 6 and 14% Omega 9. High protein content food (more than 50%). Rich in vitamin A (681 ug in 100 ml) and vitamin E (among 175.68 and SENSORY CHARACTERISTICS Color : Light yellow Smell : Caracteristic Taste : Caracteristic Texture : Oily liquid PHYSICOCHEMICAL CHARACTERISTICS Characteristics : Range or Limit Acidity : 0.2 - 0.8 mg KOH/g Peroxide index :
Fushun 0.5%oil content refined solid paraffin wax, kunlun brand. Paraffin Wax 1.100% Pure Paraffin Wax 2.ISO 9001 proved 3. Transparent and White 4.Low Oil Content 5. SGS 6. REACH Fully refined and semi refined paraffin wax is used widely, mainly used as candles,board,plastics,rubber and other commodity(like waxed paper ,crayons,candles,carbon paper) of the component and packing materials, baking container with dressing, used for electrical components, insulation rubber aging resistance and increased flexibility, etc.
Paraffin wax is a translucent soft solid commonly referred to as wax. It is extracted from petroleum and burns readily. Paraffin Wax is used for several purposes. Paraffin wax is a white or colorless soft solid derivable from petroleum, coal or oil shale, that consists of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms. These waxes are categorized by oil content and the degree of refinement. Application: Candle manufacture, wax paper, polishes, cosmetics, electrical insulation assist in extracting perfume from flowers, medical ointment, Pharmacy, Batteries, Paint and varnish removers, waterproof coat for wood, match industry, Corrosion inhibitor, food and chocolate polishing, PVC lubricant. some factories mix paraffin wax 3-5% with 1-1.5% to receive a better quality. Packing: 25kg Carton Box Item Specification Melting Point: 58 -64C Oil Content: 1%- 5% Colour: Off White Flash point: 250 C
Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series - 20 Mtr. Head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust loads - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS Pumps are available Specification Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph - Power Range : 7.5 kW to 75 kW (10 HP to 100 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Thrust Load : 7.5 kW -30 kW -10000 lbs - Speed : 2880 RPM - Head Range : 12 Mtr. To 440 Mtr. - Discharge Range : 2400 LPM to 300 LPM - Outlet Size in Inch : 4.0" & 5.0" - Degree of Protection : IP 58 - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : Star Delta (SD) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
V7 Borewell Submersible Pumpset Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Cast iron casting bowl and SS-410 grade impeller in mix flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps Specification - Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW - Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Speed : 2880 RPM - Head Range : 18 Mtr. To 650 Mtr. - Discharge Range : 1860 LPM to 55 LPM - Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0 - Degree of Protection : IP 58 - Direction of Rotation : Electrically Reversible -3ph - Thrust Load : 11.2 kW -37.3 kW -8000 lbs - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
V6 Borewell Submersible Pumpset Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
V5 Borewell Submersible Pumpset Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5 , 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5, 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m²/sec (max.) - Ph Value : 6.5 to 8.5