Find Verified Hydraulic Torque Wenches Suppliers, Manufacturers and Wholesalers

We are supplier and exporter of Hydraulic Oil. Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs. Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.

A Torque Driver is a precision tool used in dental implant procedures and laboratory settings to apply a specific amount of torque when tightening or loosening screws, abutments, or other implant components.

The hydraulic enema/ sausage stuffer machine / sausage filler machine is the main equipment for processing intestinal products, which can fill all kinds of large, medium and small intestinal products. The machine is driven by piston type hydraulic pressure. Under the action of the hydraulic cylinder, the materials in the cylinder will be squeezed out after the pressure is generated by adjusting the working pressure. The upper part of the machine is equipped with a storage hopper and butterfly valve, which can realize continuous filling without lifting the cover and improve the working efficiency. Capacity 150-300kg , 1.5kw .

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

A Torque Driver is a precision tool used in dental implant procedures and laboratory settings to apply a specific amount of torque when tightening or loosening screws, abutments, or other implant components.

Fly ash is a by-product produced while burning finely ground coal in a boiler to produce electricity. It is removed from the plant exhaust gases primarily by electrostatic precipitators or baghouses and secondarily by scrubber systems. Physically, fly ash is a very fine, powdery material, composed mostly of silica. Nearly all particles are spherical in shape. Fly ash is a pozzolan, a siliceous material which in the presence of water will react with calcium hydroxide at ordinary temperatures to produce cementitious compounds. SiO2, Al2O3, Fe2O3 and occasionally CaO are the main chemical components present in fly ashes. Fly ash significantly improves concrete performance in different ways and also provides many benefits in cement and non-cement applications. Fly Ash colour can vary from grey and dark grey, yellowish tan and light to brownish. ADVANTAGES OF FLY ASH IN CONCRETE Fly Ash is a Pozzolan Improves concrete workability and lowers water demand Sulfate and Alkali Aggregate Resistancet Rise in compressive strength over time Environment friendly CEMENTATION Fly Ash is optimized for its fineness while reducing the water demand and improving the chemical compositions to maximise its benefits when used in concrete. Fly-ash can also be used as an add-on to concrete mixture with pozzolanic and/or latent hydraulic properties. We at CEMENTATION selectively collect fly ash and subject to rigorous testing, further refines these collected materials to produce quality fly ash products meeting the needs of our customers.

Hyundai D4BB LPG engine (The only difference between Diesel and LPG is the engine head, everything else is the same) here key specifications: ] Displacement: 2607 cc Power Output: 78 â?? 83 hp Torque Output: 162 â?? 168 Nm Cylinder Block: Cast iron Block Head: Aluminum 8-valve Cylinder Bore: 91.1 mm Piston Stroke: 100 mm Compression Ratio: 21.0 Fuel System: Prechambers Fuel Type: Turbocharging: No Engine Oil Capacity: 6.5 liters

Mitsubishi MG400 Motor Grader Specifications Main Specifications Blade Width: 3710mm (standard blade width) Steering System: ATC Weight & Loads Operating Weight: 13,100kg Front Axle Load: 3,700kg Rear Axle Load: 9,400kg Dimensions Overall Length: 8490mm Overall Width: 2400mm Overall Height: 3360mm Wheelbase: 5910mm Tandem Wheelbase: 1520mm Ground Clearance: 355mm Engine Manufacturer: MTB Model: 6D22C Rated Output: 110.3kW (150 PS) @ 2000rpm Cylinders: 6 Bore x Stroke: 130 x 140mm Displacement: 11.2liters Hydraulic System Output Pressure: 17.2MPa Oil Flow Rate: 128L/min Transmission Type: DPS Speeds: 6 forward / 6 reverse Max Travel Speed: 45.0km/h (forward), 45.4km/h (reverse) Tires Front: 13.00-24, 14-ply Rear: 13.00-24, 14-ply Performance & Other Features Operation Type: Hydraulic (HYD) Scarifying Width: 1225mm Minimum Turning Radius: 6900mm Articulate Angle: 25 Fuel Tank Capacity: 230L Optional Equipment: BL(4000), S/C

CASE MW36 Wheel Loader - Typical Specifications Operating Weight: Approximately 3,200 to 3,600 kg (about 7,000 to 8,000 lbs) Bucket Capacity: Generally around 0.65 to 0.9 cubic meters Dimensions: Overall Length: Approximately 4.0 m (varies with configuration) Width: Roughly 2.5 m Height: Around 3.0 m Lift Height: Typically in the range of 2.5 to 3.0 m Transmission: Options may include hydrostatic or mechanical drive, depending on the model configuration Additional Features: Ergonomic operator station Versatile hydraulic system for various attachments

Based on the serial number 10KA0976, your equipment is a SkyTrak 10000M ATLAS telehandler, also known as the All-Terrain Lifter Army System (ATLAS) with a 10,000 lb capacity. Here are the key specifications: Lifting Capacity: 10,000 lbs (4,536 kg) Maximum Lift Height: Approximately 27.5 ft (8.38 m) with the 10,000 lb carriage Maximum Reach: Approximately 24 ft (7.4 m) Dimensions: Height: 102 inches (259 cm) Width: 100 inches (254 cm) Turning Radius: 13.5 ft (4.1 m) Frame Tilt: 9 degrees each way Hydraulic Reservoir Capacity: 55.6 gallons (214 liters) Fuel Tank Capacity: 44 gallons (167 liters) Boom: Telescopic 3-stage Steering Modes: 2-wheel, 4-wheel, and crab steering Fording Depth: Up to 36 inches (91 cm) Transportability: Air transportable in C-130, C-141, C-5A, and C-17 aircraft

Principal The manual steering system is the device that a helm pump driven by the rotation of the steering wheel supplies oil to the cylinder and pushes the piston of the cylinder to have the rudder shaft move. It is a simple system consisting of a helm pump and a cylinder. Cylinder has 4 types of single, rotary, twin, and two rudder. D-I offers the best options to combine kinds of help pumps and cylinders. Our choice mostly satisfies customers, but in case of your special needs, you have many optional ways. The number of rotation wheels is defined by the capacity of the cylinder and the helm pump (cc/rev). You can select the specification you want. Key features Simple system 2 helm pumpsâ??below 50cc, above 50cc Compatible with commercial handles in the range of 300 mm to 1,500 mm Dual handle installation is possible. The lock valve is supplied as default, which can fix the rudder where the handle stops. Structure that the rudder does not rotate even when the tide powers the rudder Rudder angle indicator attachable Application Suitable for vessels below 500 HP A range of vessels from leisure ships, fishing boats, commercial boats, and passenger boats

We are offering natural and alkalized cocoa powder. Specifications natural and alkalized cocoa powder 1012 haccp,qs,iso,gmp,kosher made from ivory coast cocoa beans cocoa powder is rich in nutrition which has high-calorie fat and abundant protein and carbohydrate. There are a certain amount of alkaloids, theobromine, and caffeine in cocoa powder, the three of which have the function of expanding blood vessels and promoting human blood circulation. So it is very good for the health of human body to eat cocoa products. With natural cocoa beans as raw material, brown-red solid powder which is produced by processes such as screening, roasting, grinding and basifying, sterilizing, machine pressing, milling and so on by imported hydraulic presser production lines has the natural cocoa fragrance. According to processing methods and application, cocoa powder can be divided into: natural cocoa powder-used to produce chocolate,confectionery due to its relative ly low solubility in water. ph value:5.0-5.8 alkalized cocoa powder-applied to almost all kinds of food and beverage to enhance flavors with mellow mouth of feel and high solubility in water. ph value:6.2-7.5 according to the fat content, cocoa powder can be classified into: 22%~24% high-fat 10%~12% medium fat (most commonly used) 6-8%, 8-10% low-fat packing: in 25kg kraft paperbags

PRODUCT NAME: 0.13mm 14mm 4160mm dog leash constant force spring---- Stainless steel / starter spring / recoil spring / Flat spring / rewind spring / coil spring / Constant Force Spring / Constant Torque Spring PRODUCT SCOPE: Spring Thickness: 0.13mm Spring Width: 14mm Spring Length: 4160mm Inner Diameter:5mm Outer Diameter: 20mm Hook size: Spring Material: Stainless steel HS Code: 73202090