Apply to Marine : Fishing boat, Leisure boat, Cruise Standard supply Mechanical control valve Cable bracket/clamp parts. Oil cooler/cover Companion flange/Reamer bolts Bell housing(Selection) Dual stage coupling(Selection) Features Marine reduction gearbox with hydraulic clutch. Suitable for twin engines with the same reduction ratio as forward/reverse. Design and strict quality management according to ISO9001 standards. Use of seawater resistant castings. Quiet operation with precise gearing. Tapered roller bearing application considering maximum thrust. Compact design, minimal appearance in its class. Permanently available oil filter(metal) applied. GO HOME(emergency bolt application) function. Options Electric control valve(12V, 24V optional) Mechanical trolling valve Mounting brackets(Flat type, Customized) CENTA Flexible coupling Class
Apply to Marine : Fishing boat, Leisure boat, Cruise Standard supply Mechanical control valve Cable bracket/clamp parts. Oil cooler/cover Companion flange/Reamer bolts Bell housing(Selection) Dual stage coupling(Selection) Features Marine reduction gearbox with hydraulic clutch. Suitable for twin engines with the same reduction ratio as forward/reverse. Design and strict quality management according to ISO9001 standards. Use of seawater resistant castings. Quiet operation with precise gearing. Tapered roller bearing application considering maximum thrust. Compact design, minimal appearance in its class. Permanently available oil filter(metal) applied. GO HOME(emergency bolt application) function. Options Electric control valve(12V, 24V optional) Mechanical trolling valve Mounting brackets(Flat type, Customized) Class
Apply to Marine : Fishing boat, Leisure boat, Cruise Industrial : Water Pump, Sand Pump Standard supply Mechanical control valve Cable bracket/clamp parts. Oil cooler/cover Companion flange/Reamer bolts Bell housing (Selection) Rubber block coupling (Selection) Features Marine reduction gearbox with hydraulic clutch. Suitable for twin engines with the same reduction ratio as forward/reverse. Design and strict quality management according to ISO9001 standards. Use of seawater-resistant castings. Quiet operation with precise gearing. Tapered roller bearing application considering maximum thrust. Compact design, minimal appearance in its class. Permanently available oil filter (metal) applied. GO HOME (emergency bolt application) function. Options Electric control valve (12V, 24V optional) Mechanical trolling valve Mounting brackets (flat type, customised)
Apply to Marine: Fishing boat, leisure boat, cruise Industrial: Water Pump, Sand Pump Standard supply Mechanical control valve Cable bracket/clamp parts. Oil cooler/cover. Companion flange/reamer bolts Bell housing (Selection) Dual-stage coupling Rubber block coupling (SAE #4) Features Marine reduction gearbox with hydraulic clutch. Suitable for twin engines with the same reduction ratio as forward/reverse. Design and strict quality management according to ISO9001 standards. Use of seawater-resistant castings. Quiet operation with precise gearing. Tapered roller bearing application considering maximum thrust. Compact design, minimal appearance in its class. Permanently available oil filter (metal) applied. GO HOME (emergency bolt application) function. Options Electric control valve (12V, 24V optional) Mechanical trolling valve Rubber block coupling Mounting brackets (Flat Type, Customized)
Key features Power from the engine can be extracted without a clutch. DIS is a flange housing with internal taper bearing support to protect engine crankshafts from the reaction forces coming from high-angle cardan shaft connections. Flexible couplings protect the powertrain system. Application Useful for devices generated by engine Support to Drive V-drive in distance Drive for Compressor (air/gas) Suitable for fire pump, generator
Persian lemons, avocados, premium meats, tequila.
1> Back To Back Towel Bars(with and without metal washers) 2> Pull handled available in various sizes with back to back Towel bars 3> Glass thickness : 6 mm~12 mm 4> Size: 19 x 6"/8"/10/12"/18"/24" C/C 5> Material :304 Stainless Steel / #62 Brass Tubular 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.
Product's name: Wood Charcoal Keywords: Flat cube charcoal,Flat cube burning,Lump charcoal , Lump Shisha Charcoal, Silver Charcoal. Specification as following: Specification: Grade A Material (Composition) 90% bamboo charcoal & 10% pure nature bonding Moisture Content less than 6% Fixed Carbon More than 85% Ash 4% Heat value 7000J-8000J Volatile Matter 2% Hardness 90% Temperature (Burning) 700-880°C Burning Time 4-5 hours Others feature smokeless,odourless,innocuity, no bursting it is an environment-friendly products , no any chemicals Size: hexagon shape square diameter outer diameter Æ 40mm 40x40mm inner diameter Æ 10mm Æ 10mm Length 18-25cm 18-25cm Weight (Average) 285g-295/pc 285-295g/pc
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
Non-Sterile Medical Examination Nitrile Gloves Powder free & Latex free 100% Virgin raw materials with FDA certificate & as per ASTM D6319/ CE EN 455 Quality standard: ASTM D6319, with 510K and FDA, CE/EN455, Color: Blue, white Finger Tips: textured Cuff: Beaded Pcs per Box for S/M/L/XL : 100pcs/box Origin: China, Vietnam, Thailand, Malaysia Benefits Protection from unwanted and harmful substances Beaded Cuff ensures easy donning and prevent roll down Superior Strength with better Puncture resistance Finger Tip Textured enhances wet and dry grip Thinner Guage improves tactile senstivity Custom Design enhances comfort and fit Provide an Alternate Solution for individual who are allergic to natural rubber latex Material : Synthetic Nitrile Type : Non-Sterile Powder Free, Amibidextrous, Finger Tip Textured, beaded cuff. Storage: Store in a dry and cool place, the temperature not higher than 38�° C Shelf life: 2 years Physical Properties Tensile Strength: Before Aging 14Mpa min Tensile Strength: After Aging 14Mpa min Elongation at Break (%): Before aging 500% min Elongation at Break (%): After aging 400% min Length: 230 mm in XS, S, M, L, XL Width: 70+/- 10 (XS) Width: 80+/- 10 (S) Width: 95+/- 10 (M) Width: 110+/- 10 (L) Width: 120+/- 10 (XL) Thickness Single wall ( mm): Fingers 0.050mm min Thickness Single wall ( mm): Palm 0.050mm min
Frozen Chicken Feets/ Paws Freezing Type - BQF Country of origin - france Grade - A or A&B MIX Average weight - Feet 35-55g, Paw: 30-45g Packing - Polyblock and then in carton Storage temp. - -18 C Approved for - HK, Vietnam, EU Countries Shelf life - 12 months
Specification: Free Fatty Acids (% As Palmitic) : 5.0% Max. Moisture And Impurities (AOCS Ca 2c-25) : 0.1-0.25% Max. IODINE VALUE (Wijis) (AOCS Cd 1-25) : 50-55 Min. SLIP MELTING POINT (AOCS Cc3-25) : 33-39 C Max. COLOUR (Lovibond 5.25 cell) : 3.5R/3.5Y Max. DOBI : 2.31 Min Purity and freshness are the highlights of Crude Palm Oil, which we make available. This Crude Palm Oil is processed hygienically as per the set rules and regulations. We are rated as a dependable Manufacturer and Exporter of Crude Palm Oil. Packing Size: 1) PET Bottle 0.25L, 0.50L, 1L, 2L, 3L, 5L 2) HDPE Jerry Can 1L, 2L, 3L, 5L, 8L, 10L, 16L, 18L, 20L, 25L 3) Big Mouth HDPE Jerry Can 10L, 16L, 18L 4) Tin Can 16L, 18L, 20L 5) Steel Drum 190kgs 6) Plastic Drum 190kgs 7) Bag In Box 20L 8) Flexi Tank 21MT Quality:CP6, CP8, CP10
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Gear pumps are commonly used for pumping high viscosity fluids such as oil, paints, resins or foodstuffs. They are also preferred in applications where accurate dosing or high pressure output is required. We supply different types of Hydraulic gear pumps For more information please contact us
Available For Sale In Bulk Vessel Gypsum @ USD 12.00 PMT FOB Paradeep, India Payment Terms L/C, As Per Specification. Interested Buyer May Kindly Contact.
