Frequency Output Temperature and Humidity Sensor HTF3226LF DESCRIPTION Based on the rugged HS1101LF humidity sensor, HTF3226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a miniature connector for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the moduleâ??s linear frequency output. FEATURES * Full Lead free product * Calibrated within +/-5% @55%RH * Small size and very cost effective * Miniature connector (JST) * 10kOhms +/-3% NTC temperature sensor (1% optional) * The best combination of cost effectiveness and performance * Stable, linear proportional frequency output from 10% to 95%RH * Stable and reproducible characteristics with temperature * High reliability and long term stability Humidity Sensor Specific Features * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Not affected by water immersion * Patented solid polymer structure Temperature Sensor Specific Features * High quality thermistor * Stable * High sensitivity APPLICATIONS * Printers * Home Appliance -
Voltage Output Temperature and Humidity Sensor HTG3515CH DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. FEATURES * Voltage Supply: 5 Vdc * Nominal Output @55%RH: 2.401 - 2.559 V * Humidity Average Sensitivity: +26 mV/%RH * Current consumption: 1.2 mA dc * Humidity Measuring Range: 0 - 100 %RH * Humidity Operating Range: 0 - 100%RH * Temperature Operating Range: -40 - 110'C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25'C * Humidity calibrated within +/- 3% RH @ 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations APPLICATIONS * Automotive * Home Appliance * Printers -
Temperature and Relative Humidity Sensor Module Description: Based on the rugged HS1101LF humidity sensor, HTF3000LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the module's linear frequency output. Features: * Small size product * Compliant with RoHS recommendations and most of Lead Free Soldering Process * Humidity calibrated within ±3% @55%RH at 5Vdc * Stable, proportional frequency output from 0 to 100% RH * High quality thermistor * One of the smallest humidity/temperature modules on the market * High reliability and long term stability * Not affected by water immersion * Stable characteristics with temperature * Part could be washed with distilled water Humidity Sensor Specific Features: * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Patented solid polymer structure Temperature Sensor Specific Features: * 10kΩ ±1% NTC temperature sensor * Stable * High sensitivity APPLICATIONS: * Printers * HVAC controller -
Economic and reasonable sensor of high accuracy and quality Compact size and slim design Compatible plug-in module design Various combinations of temperature and humidity outputs including passive
Parameters: 1)storage temperature: -40 to 125ºc 2)supply voltage: 3.8v 3)humidity operating range: 1-100%rh 4)temperature operating range: -40 to 125ºc 5)vdd to gnd:-0.3 to 3.6v 6)digital i/o pins (data/sck) to vdd:-0.3 to vdd+0.3v 7)-10 to +10 ma Features: (1)dfn type package (2)relative humidity and temperature digital output, i2c interface (3)fully calibrated (4)lead free sensor, reflow solderable (5)low power consumption (6)fast response time and very low temperature coefficient Isweek provide smoke, gas, humidity&temperature, uv, fluid or other kinds of sensors More details welcome to inquiry: skype:isweek_laura
Application Humidity sensor, as an important chemical sensor, which is widely used in fields of warehousing, industry production, and process control, environmental monitoring, home appliances and meteorology etc. inner: plastic foam outside: carton
SOJI ELECTRONICS delivers "Advanced Fuel Management Solutions" and is the premium brand for capacitive fuel level sensor with outstanding features: high accuracy (up to 99.5%), wide operation temperature, flexible length, exact algorithm, smart software and easy installation.
HTG3515CH Voltage Output Temperature and Humidity Sensor DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. HTG3515CH Voltage Output Temperature and Humidity Sensor FEATURES * Voltage Supply: 5 Vdc * Nominal Output at 55%RH: 2.401~2.559 V * Humidity Average Sensitivity: +26 mV/%RH * Current consumption: 1.2 mA dc * Humidity Measuring Range: 0~100 %RH * Humidity Operating Range: 0~100%RH * Temperature Operating Range: -40 ~110 deg C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25 deg C * Humidity calibrated within +/- 3% RH at 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations HTG3515CH Voltage Output Temperature and Humidity Sensor APPLICATIONS * Automotive * Home Appliance * Printers
AM2322 Temperature and Humidity Sensor Product Overview AM2322 The digital temperature and humidity sensor is a kind of temperature and humidity composite sensor with the output of calibrated digital signal. The special temperature and humidity collection technology is adopted to ensure the high reliability and long-term stability of the product.The sensor includes a capacitive sensing element and a high-precision integrated temperature measurement element, which is connected to a high-performance microprocessor.The product has high quality, super fast response, strong anti-interference ability and high cost performance. AM2322 communication mode adopts single bus, standard I squared C communication mode.Standard single bus interface makes system integration easy and fast.The super small volume, extremely low power consumption, the signal transmission distance can reach up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications.The I squared C communication mode adopts standard communication timing, and the user can be directly attached to the I squared C communication bus, with no additional wiring and simple use. Two kinds of communication mode is used directly output after temperature compensation, humidity, temperature and the CRC check and other digital information, users need to secondary calculation of digital output, also need not to compensate the temperature humidity, accurate temperature and humidity information can be got.The two modes of communication are free to switch, users are free to choose, easy to use, and should be widely used.The product is 4 lead wire and convenient connection. Special packaging can be provided according to user's demand. AM2322 Temperature and Humidity Sensor Product Features * Super Mini Size Easy Protable * Ultra-low voltage work * Ultra-Low Power State * Excellent long-term stability * Standard And single bus output AM2322 Temperature and Humidity Sensor Range of application Hvac, dehumidifier, testing and inspection equipment, consumer goods, automotive, automatic control, data recorder, weather stations, household appliances, humidity control, medical, and other relative humidity control. AM2322 Temperature and Humidity Sensor Product highlights Completely interchangeable, the cost is low, long-term stability, relative humidity and temperature measurement, signal transmission distance long, digital signal output, accurate calibration, extremely low power consumption, standard single bus digital interface, standard I2C bus digital interface,The mode of communication is free to choose. AM2322 Temperature and Humidity Sensor Sensor performance * Humidity range: 0~99.9%RH * Temperature range: -40 ~ +80'C * Humidity Accuracy: ±2%RH * Temperature Accuracy: ±0.3'C * Humidity Repeatability: ±0.1%RH * Temperature Repeatability: ±0.2'C * Service voltage: 3.1V to 5.5V * Output signal: single bus /IIC signal
AM2322 Temperature and Humidity Sensor Product Overview AM2322 The digital temperature and humidity sensor is a kind of temperature and humidity composite sensor with the output of calibrated digital signal. The special temperature and humidity collection technology is adopted to ensure the high reliability and long-term stability of the product.The sensor includes a capacitive sensing element and a high-precision integrated temperature measurement element, which is connected to a high-performance microprocessor.The product has high quality, super fast response, strong anti-interference ability and high cost performance. AM2322 communication mode adopts single bus, standard I squared C communication mode.Standard single bus interface makes system integration easy and fast.The super small volume, extremely low power consumption, the signal transmission distance can reach up to 20 meters, making it the best choice for all kinds of applications and even the most demanding applications.The I squared C communication mode adopts standard communication timing, and the user can be directly attached to the I squared C communication bus, with no additional wiring and simple use. Two kinds of communication mode is used directly output after temperature compensation, humidity, temperature and the CRC check and other digital information, users need to secondary calculation of digital output, also need not to compensate the temperature humidity, accurate temperature and humidity information can be got.The two modes of communication are free to switch, users are free to choose, easy to use, and should be widely used.The product is 4 lead wire and convenient connection. Special packaging can be provided according to user's demand. AM2322 Temperature and Humidity Sensor Product Features * Super Mini Size Easy Portable * Ultra-low voltage work * Ultra-Low Power State * Excellent long-term stability * Standard And single bus output AM2322 Temperature and Humidity Sensor Range of application Hvac, dehumidifier, testing and inspection equipment, consumer goods, automotive, automatic control, data recorder, weather stations, household appliances, humidity control, medical, and other relative humidity control. AM2322 Temperature and Humidity Sensor Product highlights Completely interchangeable, the cost is low, long-term stability, relative humidity and temperature measurement, signal transmission distance long, digital signal output, accurate calibration, extremely low power consumption, standard single bus digital interface, standard I2C bus digital interface,The mode of communication is free to choose. AM2322 Temperature and Humidity Sensor Sensor performance * Humidity range: 0~99.9%RH * Temperature range: -40 ~ +80'C * Humidity Accuracy: ±2%RH * Temperature Accuracy: ±0.3'C * Humidity Repeatability: ±0.1%RH * Temperature Repeatability: ±0.2'C * Service voltage: 3.1V to 5.5V * Output signal: single bus /IIC signal
Based on the rugged humirel humidity sensor, GP3516 is a dedicated humidity plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the module�??s humidity linear voltage output. The threaded end ensures proper mounting of the sensor inside te camber. GP3515 is specially suitable for humidity chambers applications. Main features Tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO2 , H2S, O3, NOx , NO, CO, Softener, acids (H2SO4, HNO3, HCl), HMDS, Insecticide, Cigarette smoke . Threaded end for convenient and proper mounting. Reliability not affected by repeated condensations Full interchangeability. Better than +/-3%RH and +/-0.15°C Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5 V DC supply Humidity calibrated within +/- 3% RH @ 55% RH Ratiometric to voltage supply within the specified range Resistance to chemical and physical stresses GP3515 has circuit to protect against Electrostatic discharges upto 15 KV air discharge. GP3515 is protected against reverse polarity GP3515 is not light sensitive Additional tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2, O 3, NO, CO,CO2, Softener, Soap, acids. Dimensions: Length: 90mm, Diameter: 19mm , Threading: M18 (Male -)
Specifications: 1) Power Supply: 5V DC 2) Electric current: 2mA (max. 5mA) 3) Temperature operating range: 20 â?? 50 0 C 4) Humidity operating range: 0 â?? 100% Rh 5) Humidity measurement range: 20 â?? 80% Rh 6) Accuracy: 5% Rh (at 25 0 C and 5 V DC) 7) Temperature Storage range: -20 to 85 0 C 8) Humidity storage range: below 85% Rh 9) Size: 34.7 x 21.6 x 10 mm 10) Polarity Protection: Not Provided -
Based on the rugged HUMIREL humidity sensor, GP3515 is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. GP3515 is designed for high volume and demanding applications. Main features â?¢ Tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2 (0.5%), H 2 S (0.5%), O 3 , NOx, NO, CO, Softener, acids (H 2 SO 4 , HNO 3 , HCl), HMDS, Insecticide, Cigarette smoke . â?¢ Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS â?¢ Reliability not affected by repeated condensations â?¢ Full interchangeability. Better than +/-3%RH and +/-0.15°C â?¢ Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5 V DC supply â?¢ Humidity calibrated within +/- 3% RH @ 55% RH â?¢ Temperature measurement through NTC 10 kΩ +/- 1% direct output â?¢ Ratiometric to voltage supply within the specified range Maximum Ratings: Parameter Symbol Value Unit Storage Temperature T stg -40 to125 C Supply Voltage V cc 5.25 V DC V dc Humidity Operating range Rh 0 to 100 %Rh Max. output current I peak 5 mA Temperature operating range T a -40 to 110 C Max. Power P d 25 mW Electrical Characteristics: (@23C, @Vcc=5 V DC, RL -
Temperature and Relative Humidity Sensor Module Description: Based on the rugged HS1101LF humidity sensor, HTF3000LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the moduleâ??s linear frequency output. Features: * Small size product * Compliant with RoHS recommendations and most of Lead Free Soldering Process * Humidity calibrated within ±3% @55%RH at 5Vdc * Stable, proportional frequency output from 0 to 100% RH * High quality thermistor * One of the smallest humidity/temperature modules on the market * High reliability and long term stability * Not affected by water immersion * Stable characteristics with temperature * Part could be washed with distilled water Humidity Sensor Specific Features: * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Patented solid polymer structure Temperature Sensor Specific Features: * 10kΩ ±1% NTC temperature sensor * Stable * High sensitivity APPLICATIONS: * Printers * HVAC controller PERFORMANCE SPECS Storage Temperature: -40 to 105 'C Storage Humidity: 0 to 100 % RH Supply Voltage (Peak): 16 Vdc Humidity Operating Range: 0 to 100 % RH Temperature Operating Range: -40 to 85 'C
Digital Temperature Humidity Sensor HTU21D In Stock 1. digital temperature and humidity sensor 2. range:1-100%RH 3. original, high quality, competitive price DESCRIPTION HTU21D, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, I²C format. HTU21D sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. HTU21D sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command.
Profiles: HPT621 capacitance fuel level sensor is the customized sensor meter for precise measuring of the fuel oil level of automobile oil tanks, tankers, locomotives and oil depots, etc. The whole series products are capable of self-calibration. The user can realize the ZERO or RANGE self-calibration with two buttons or two lead lines to meet different requirements on various complex occasions. Features 1.Convenience: it can be installed by flanges, simple and easy to operate. 2.Independence: It can measure the oil quantity directly to achieve the fuel consumption value, it will not be any action and without affecting to the oil system / pipeline. 3.Uniqueness:the user can do recalibration through the button, digital output is also available with debugging software. 4. Self adjustability: according to the different size of tank, user can adjust the range of the sensor and do installation; sensor increases temperature compensation function, correct error automatically due to fuel volume change caused by the change of the temperature. 5. Safety: It can replace the original vehicle oil gauge directly, no need to drill in tank to install capacitance sensor, electronic cabin is explosion-proof design and get the explosion-proof certificate; sensor flange with two layers of the anti leakage groove, prevent oil leakage problems. 6. Stability:no mechanical moving parts, mature and stable circuit structure and components of good quality will make the sensor be used continuously for years without changing.
AM2302 Temperature and Humidity Sensor Module Product Overview AM2302 Humidity-sensitive capacitance digital temperature and humidity module is a digital output signal containing a calibrated temperature and humidity combined sensor. It uses a dedicated digital modules capture technology and the temperature and humidity sensor technology to ensure that products with high reliability and excellent long-term stability. Sensor includes a capacitive humidity sensing element and a high-precision temperature measurement devices, and with a high-performance 8-bit microcontroller connected. Therefore, the product has excellent quality, fast response, anti-interference ability, high cost and other advantages. AM2302 Temperature and Humidity Sensor Module Applications HVAC, dehumidifiers, testing and inspection equipment, consumer goods, automotive, automation, data loggers, home appliances, humidity regulator, medical, weather stations, and other related humidity measurement and control, etc. AM2302 Temperature and Humidity Sensor Module Product Highlights Ultra-low power, transmission distance, fully automated calibration, using capacitive humidity sensor, completely interchangeable, standard digital single-bus output, excellent long-term stability, high-precision temperature measurement devices. AM2302 Temperature and Humidity Sensor Module Sensor Performance * Humidity range: 0~99.9%RH * Temperature range: -40~+80 deg C * Humidity Accuracy: ±2%RH * Temperature Accuracy : ±0.5 deg C * Humidity Repeatability: ±0.3%RH * Temperature Repeatability: ±0.2 deg C * Service voltage: 3.3V to 5.5V * Output signal: Single
HTM226LF Temperature and Humidity Sensor Module DESCRIPTION Based on the rugged HS24LF resisitive humidity sensor, HTM226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the nodule's linear voltage output. HTM226LF Temperature and Humidity Sensor Module FEATURES * Full Lead free product * Calibrated within +/-5% @55%RH at 5Vdc * Small size and very cost effective * Miniature connector (JST) * 50kOhms +/-3% NTC temperature sensor @25'C * The best combination of cost effectiveness and performance * Stable, linear proportional voltage output from 0% to 95%RH * Stable and reproducible characteristics with temperature * High reliability and long term stability HTM226LF Temperature and Humidity Sensor Module APPLICATIONS * Air condition, Humidifier, Dehumidifier * Humidity controller, Humidity transmitter * Hygrometer, Hygro-recorder * Copying machine * Clock, Weather-forecast barometer
Sht20 digital temperature and humidity sensor product summary The sht20 humidity and temperature sensor of sensirion has become an industry standard in terms of form factor and intelligence: embedded in a reflow solderable dual flat no leads (dfn) package of 3 x 3mm foot print and 1.1mm height it provides calibrated, linearized sensor signals in digital, i2c format. The sht2x sensors contain a capacitive type humidity sensor, a band gap temperature sensor and specialized analog and digital integrated circuit - all on a single cmosens chip. This yields in an unmatched sensor performance in terms of accuracy and stability as well as minimal power consumption. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip which can be read out by command. Furthermore, the resolution of sht2x can be changed by command (8/12bit up to 12/14bit for rh/t) and a checksum helps to improve communication reliability. With this set of features and the proven reliability and long-term stability, the sht2x sensors offer an outstanding performance-to-price ratio. For testing sht2x two evaluation kits ek-h4 and ek-h5 are available. Sht20 digital temperature and humidity sensor features * fully calibrated * digital output, i2c interface * low power consumption * excellent long term stability * dfn type package reflow solderable Sht20 digital temperature and humidity sensor performance Size: 3 x 3 x 1.1 mm Output: i²c digital, pwm, sdm Supply voltage range: 2.1 to 3.6 v Energy consumption: 3.2µw (at 8 bit, 1 measurement / s) Rh operating range: 0 - 100% rh T operating range: -40 to +125'c (-40 to +257'f) Rh response time: 8 sec (tau 63%)
Sht21 digital humidity and temperature sensor product summary The sht21 humidity and temperature sensor of sensirion has become an industry standard in terms of form factor and intelligence: embedded in a reflow solderable dual flat no leads (dfn) package of 3 x 3mm foot print and 1.1mm height it provides calibrated, linearized sensor signals in digital, i2c format. The sht2x sensors contain a capacitive type humidity sensor, a band gap temperature sensor and specialized analog and digital integrated circuit all on a single cmosens chip. This yields in an unmatched sensor performance in terms of accuracy and stability as well as minimal power consumption. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip - which can be read out by command. Furthermore, the resolution of sht2x can be changed by command (8/12bit up to 12/14bit for rh/t) and a checksum helps to improve communication reliability. With this set of features and the proven reliability and long-term stability, the sht2x sensors offer an outstanding performance-to-price ratio. For testing sht2x two evaluation kits ek-h4 and ek-h5 are available. Sht21 digital humidity and temperature sensor features * fully calibrated * digital output, i2c interface * low power consumption * excellent long term stability * dfn type package - reflow solderable Sht21 digital humidity and temperature sensor performance Size: 3 x 3 x 1.1 mm Output: iâ²c digital, pwm, sdm Supply voltage range: 2.1 to 3.6 v Energy consumption: 3.2âµw (at 8 bit, 1 measurement / s) Rh operating range: 0 - 100% rh T operating range: -40 to +125'c (-40 to +257'f) Rh response time: 8 sec (tau 63%)
