Please find our products below: 1) Drilling Weighing Material (e.g. Bentonite, Barite, etc) 2) Dispersants/Deflocculants (e.g. Chrome Lignite, Chrome Lignosulfonate) 3) Shale Inhibitors & Flocculants (e.g. Sulphonated Asphalt, PHPA Powder/Liquid) 4) Lubricants (e.g. Extreme Pressure Lubricant (Water/Silicate/Oil based) 5) Surfactants & Spotting Fluids (e,g, Spotting Fluid) 6) Drilling Detergents (e.g. Drilling Detergent, Rig Wash) 7) Drilling Mud Defoamers (e.g. Alcohol Silicone based defoamer) 8) Fluid Control Additives (e.g. Carboxymethyl Cellulose) 9) Workover, Completion & Drill in Products (e,g, Guar Gum, Calcium Bromide) 10) Pour Point Reducer (e.g. PPD1) 11) Emulsifiers (e.g. Primary Emulsifier) 12) Biocides & Corrosive Inhibitors 13) Scavengers (e.g. Oxygen Scavenger) 14) Lost Circulation Materials (e.g. Mica, Nut Plug, etc) 15) Other Chemicals (Caustic Soda, HCL, etc.
Product Name: Hydroxypropyl methyl cellulose/Hypromellose Other Name: hpmc powder Molecular Formula: C3H7O Molecular Weight: 59.08708 Appearance: White Powder Purity: 99% CAS NO.: 9004-65-3 EINECS No.: 618-389-6 Supplier: ZHENYIBIO Hydroxypropyl Methyl Cellulose (HPMC) are water soluble polymers derived from cellulose. They are typically used as thickeners, binders, film formers, and water retention agents. They also function as suspension aids, surfactants, lubricants, protective colloids, and emulsifiers. In addition, solutions of these polymers thermally gel.
Yida hydroxypropyl cellulose (HPMC)YD1920 has excellent adaptability, suitable for all kinds of adhesive, dry mortar, putty system. It has excellent water resistance, high consistency, sagging, go smoothly and increase the opening time, improve the bonding strength, reduce the deformation rate, prevent cracking performance. The production cost can be reduced by adjusting the amount of addition. YD1920 is widely used in masonry mortar, bonding mortar, tile binder, insulation system mortar.
Hpmc may serve as thickening agent, dispersant agent, emulsifying agent or film-forming agent, and its ndustrialized products may be applicable to the production of daily chemicals, synthetic resin, construction nd coating materials.
1. Product details Name: hydroxypropyl methyl cellulose (hpmc) ntent (%): 19.0~24.0 Hydroxy propoxy content (%): 4.0~12.0 solutely dry, 20 degree) 8. Delivery Delivery time: within 15~20days after payment confirmed. 9. Storage uld not exceed 6 months from the date of delivery. Packing: 20/25kgs /bag. Plastic woven bag with pe liner.
Hydroxypropyl Methylcellulose (HPMC) or hypromellose is a derivatives of Methyl cellulose . It is a white or off-white fibrous or granular cellulose ether powder. It is currently the cellulose with the best performance in the world, integrating thickening, suspending, dispersing, emulsifying and stabilizing. Hydroxypropyl methyl cellulose (HPMC) is non-toxic, easy to use, and easily soluble in water. It is a polyanion in aqueous solution and has unique physical properties.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Hydroxypropyl Methylcellulose(HPMC) CAS NO.:9004-65-3 Chemical Name: Hydroxypropyl Methylcellulose,HPMC,Methyl Hydroxypropyl cellulose,MHPC,Cellulose Molecular Fomula: C3H7O Molecular Weight: 59.08708 Appearance: White Powder Hydroxypropyl Methyl Cellulose (HPMC) can also be known as Methyl Hydroxypropyl Cellulose MHPC, hypromellose, are kinds of non-ionic cellulose ether, that are a natural powder of white colored to off-white-colored colour, that serve as a thickener, binder, surfactant, protective colloid, lubricant, emulsifier, and suspensions and normal water maintenance aid. Additionally, these kinds of cellulose ethers show properties of energy gelation, metabolic inertness, enzyme level of resistance, lower stench and style, and pH stability. Package: 25kg paper bags with PE inner ; 25kg/Fiber Drum
Hydroxypropyl methyl cellulose (HPMC) is a kind of odorless, tasteless and non-toxic white powder, 1. Appearance: white or off white powder, odorless and tasteless. 2. Particle size: the passing rate of 100 mesh is greater than 98.5%; The passing rate of 80 meshes is greater than 100%. 3. Carbonization temperature: 280-300 â??. 4. Apparent density: 0.25-0.70g/ (usually about 0.5g/), specific gravity: 1.26-1.31. 5. Discoloration temperature: 190-200 â??. 6. Surface tension: 42-56dyn/cm for 20% aqueous solution. Purpose: As thickener, stabilizer, emulsifier, excipient, water retaining agent, film-forming agent, etc. in the production of coatings, building materials, paint removers, agricultural chemicals, inks, textile printing and dyeing, ceramics, papermaking, cosmetics and other products. The application in synthetic resin can make the obtained products have the characteristics of regular particles, looseness, appropriate specific gravity, excellent processing performance, etc., thus basically replacing gelatin and polyvinyl alcohol as dispersants. In addition, in the construction process of the construction industry, it is mainly used in mechanized construction such as wall building, plaster finishing, caulking, etc; Especially in decorative construction, it is used for pasting ceramic tiles, marble and plastic decoration, with high pasting strength, and can also reduce the amount of cement. Used as a thickener in the coating industry, it can make the layer bright and delicate, do not remove powder, and improve the leveling performance. Function: It can thicken the fresh mortar to have a certain wet viscosity and prevent segregation. (thickening) Water retention is also the most important characteristic, which helps to maintain the amount of free water in the mortar, so that the cementitious material has more time to hydrate after the mortar construction. (water retention) It has air entrainment, which can introduce uniform and fine bubbles to improve the workability of mortar. Performance: 1. It is easy to mix with dry powder formula. 2. It has the characteristics of cold water dispersion. 3. The solid particles are effectively suspended to make the mixture more smooth and uniform. Mix: 1. The dry mixed formula containing cellulose ether can be easily mixed with water. 2. Get the required consistency quickly. 3. Cellulose ether dissolves more quickly and has no lumps. be used as: Waterproof putty for interior and exterior walls External wall insulation mortar Gypsum plaster and gypsum products Cement based plastering mortar and masonry mortar Plate joint filler Tile adhesive Self leveling ground material Water based coatings and paint removers Extruded concrete sheet
Food Grade Hydroxypropyl Methylcellulose (HPMC) is a non-ionic water soluble cellulose ether Hypromellose, targeted for the food and dietary supplement applications. Food grade HPMC products are derived from natural cotton linter and wood pulp, meeting all the requirements of E464 along with Kosher and Halal Certifications. Food grade HPMC is in compliance with FDA, EU and FAO/WHO guidelines, is manufactured in compliance with GMP standard, retaining FSSC22000 , ISO9001 and ISO14001 certifications .
Hydroxypropyl methyl cellulose(hpmc).Exporting
Hydroxypropyl , Hpmc, Hydroxyethyl Cellulose, Hec, Cellulose.
HPMC (hydroxypropyl methyl cellulose) industrial grade, high performance pigments.
Hydroxyethyl Cellulose(HEC) Hydroxyethyl cellulose is a gelling and thickening agent derived from cellulose. It is widely used in cosmetics, cleaning solutions, and other household products. Hydroxyethyl cellulose is also used extensively in the oil & gas industry as a drilling mud additive under the name HEC as well in industrial applications, paint & coatings, ceramics, adhesives, emulsion polymerization, inks, construction, welding rods, pencils and joint fillers.
ZHUOJUN® Hydroxypropyl Methyl Cellulose (HPMC) is also called as hypromellose. ZHUOJUN® HPMC products are derived from highly pure refined cotton and are specially made of etherification under alkaline conditions. This water-insoluble cellulose is turned into water-soluble nonionic polymer. ZHUOJUN® HPMC is a good film-former and varies somewhat in physical and chemical properties. ZHUOJUN® HPMC is quite hydrophilic and readily soluble in cold water.
We are the largest HPMC manufacturer & exporter in China, we can supply every kinds of HPMC with the viscosity from 3 to 150000 cps, which can be widely used in Coating, Paints, Dry-mix Mortar, Tile Adhesive, PVC, Gypsum, Pharmaceutical, Cosmetic and Food, as every kind of additive. At present, our annual capacity is about 26000 tons, and more than 60% are exported to Germany, Spain, Turkey, U.K. USA, South Korea, India and Southeast Asia, and well accepted by the customers. If you are interested in our HPMC, pls don't hesitate to contact me. Best regardsúí 25kg net paper bag with PE inner, or 25kg net fiber drum