Concrete admixture - normal superplasticizer, water repellent coatings and floor hardener.
Concrete mixture, superplasticizer, water reducer agent for concrete, polycarbozylate, naphthalene sulfonate formaldehyde.
Polycarboxylate Based Superplasticizer is the third generation concrete plasticizer which advance developed from lignosulfonate calcium type and naphthalene type plasticizer. Ready mix & precast Concrete Concretes for Mivan formwork Self compacting concrete Concretes with long hauls
Concrete admixtures: Sodium naphthalene sulfonate formaldehyde, Polycarboxylate ether superplasticizer, Sodium gluconate, Polycarboxy monomer.
HEDP is used as a retardant in concrete, scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc. In light woven industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating, HEDP is used as chelating agent. Usually, HEDP is also used together with polycarboxylic acid(superplasticizer),in which it acts as reducing agent. For price, specification and other details please contact us.
Concrete admixture, sodium naphthalene sulfonate formaldehyde, sodium gluconate, polycarboxylate superplasticizer.
Concrete admixture, polycarboxylate superplasticizer, water reducer.
Vista Pump Care 200 Gm Pouch Packing Pumpability : 60 - 70 Meters Length Vista Pump Care â?? is a dry polymer based powder concrete pump primer, easily miscible in water and is available in pre-measured pack. It is uniquely formulated to provide the concrete pumper with a cost effective method for improving the pumpability of hard to pump and/or harsh concrete and grout mixes. ADVANTAGES Increases ease and range of pumpability. Decreases wear on equipment. Decreases horsepower required for pumping. Reduces friction and line pressure. Improves mobility and consolidation. Minimizes slump and air loss through pump lines. Easily introduced into pumping equipment. Ready to use only water to be used. APPLICATION One pack of 200 gm is to be poured in the pump hopper or mixed with 30 ltrs of water in a vessel till greasy condition is achieved. Further mix the solution to 100 ltrs of water for 3 to 5 minutes for complete dissolution and then pump the mixture through the pump line before pumping of concrete. The slurry produced from one pouch will be sufficient for pumping 60-70 meters length of pipeline. For increased length additional pouches are used and additional water is to be added for proper dissolving of the powder.
With the years of experience, we are offering a wide range of qualitative Vista Catasoft to our customers. Our Vista Catasoft is a special cement additive that is synthesized our laboratories to assist cement industry in rising mill output, improving efficiency of grinding, decreasing electricity cost and reducing pack or silo set. Vista Catasoft is basically an organic complex amine salt ethoxylated in presence of cement strength improving chemicals and flow enhancers through â??SOL GELâ?� technology â?? FIRST of its kind in cement chemicals. The molecule of our Vista Catasoft contains cationic (positive) as well as negative charges in the form of anion in balanced proportion to reduce the surface energy force causing cohesion of freshly fractured cement particles due to vanderwall force. Advantages: Increased mill output by 10%-15% at same cement fineness Reduced grinding cost Effective for both Ball mill & VRM. Increased fineness at same power input to enhance performance Increased cement flow ability Improved cement strength through all ages Minimal dosage (0.05% to 0.06% by weight of cement) A significant reduction of pack set or silo set due to superior flow ability of dry cement powder. Specification: Form: Liquid Color: Brown to amber Specific Gravity: 1.10 â?? 1.13 Chloride content: Nil PH Value: 7 /-1 It complies ASTM C 465 as processing additive for cements Application of VISTA CATASOFT C - 88: Laboratory mill evaluations of clinker and other additions viz fly ash, granulated BF or steel slag. Gypsum, limestone etc are recommended to determine initial blend proportion, grinding efficiency, mortar flow, pack set index and compressive strength of cements at varying dosage to work out the most economic dose level. Cement mill trials should follow to finalize continuous use of this additive. Dosing equipment: VISTA CATASOFT C - 88 should be accurately proportioned through a calibrated dosing system at the first compartment of the mill whether open or closed circuit. Vistaâ??s technical service wing is ready to assist the customer Addition rates: Typical dosage rate may vary from 0.05% - 0.06% by weight of cements including Portland, Portland â?? pozzolana or Portland â?? slag cements as the case may be. Storage: Protect from freezing during cold climate. Once frozen it should be thawed out slowly and remixed thoroughly prior to use. Packing: Available in 250 Kg. Pack & 1000 Kg HDPE container. Shelf Life: Best before 1 year in packed condition.
Chemical, food additives, concrete admixture, water reducer, ammonium bicarbonate, potassium sorbate, potassium bicarbonate, polycarboxylate superplasticizer, sodium formate, sodium naphthalene formaldehyde, sodium bicarbonate.
Water reduce, cement additives, lignoshulphonate, superplasticizer, concrete admixtures.
Concrete admixture polycarboxylate ether PCE superplasticizer.
PCE superplasticizer is the newest generation superplasticizer for concrete projects in domestic and abroad. Comparing with PNS and other superplasticizer, PCE superplasticizer has many characteristic advantages in technology and performance as following: (1) low dosage, high rate of water reducing; (2) keep concrete good slumption retention; (3) good compatibility with cement; (4) small shrinkage of concrete to keep the stability of volume and durability; (5) environmental in production and usage.
Concrete admixture, polycarboxylate superplasticizer.
PCE Polycarboxylate superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete. With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, PCE has many characteristic advantages in technology and performance as following: (1) low dosage, high rate of water reducing; (2) keep concrete good slumption retention; (3) good compatibility with cement; (4) small shrinkage of concrete to keep the stability of volume and durability; (5) environmental in production and usage. Base on above advantages.
ItemCompany standard Jh pc 50% AppearanceTransparent pale yellow liquid Density (23é)(g/cm)1.10.05 Ph value (23é)1 Solid content (%)501 Water reducing rate (%)25 Chloride content%0.10 Na2so4content (%)5.0 Alkali content (%)5.0 Formaldehyde content (%)0.05. Pce(50%) is always diluted to 10% to 20% concentration for use
Product name: Sodium Gluconate 98%min Other name: Gluconic acid, sodium salt HS Code: 28191600 Molecular Formular: C6H11O7Na, C6H11NaO7 Appearance: White crystalline powder Application: Construction Industry as the water reducing agent, retarder cement add a certain amount of sodium gluconate can increase the concrete plasticity and strength, and have block function, or delayed concrete initial and final setting time.
Sodium gluconate, sodium napothalene formaldehyde (SNF), polycarboxylate superplasticizer(PCE).Exports
Water reducing agents, lignin sulfonates ,sodium naphthalene sulphonate sodium gluconate, hpeg/tpeg ,citric acid catalytic additives ,hydroxyethyl acrylater ,noo ,mf.
Description Polycarboxylate Superplasticizer concrete admixture (Powder) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (Powder) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (Powder) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway projects. In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (Powder) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits Polycarboxylate Superplasticizer concrete admixture (Powder) has the same technical specifications with PC-L while remarkably reducing the cost of package and transportation. 2. Polycarboxylate Superplasticizer concrete admixture (Powder) is much easier to be handled in storage and transportation compared with PC-L. 3. Excellent compatibility with various types of cements. 4. High Water Reducing Rate: Low dosage, and low slump loss. Low chloride and alkali content, no corrosion to steel-bar. 6. High Stability: Neither precipitation nor layers at low temperature. 7. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1. When Polycarboxylate Superplasticizer concrete admixture (Powder) is applied in the form of powder, normal dosage ranges from 0.15% to 0.6% of the weight of cementitious material in 1m3 of concrete. When applied in the form of liquid by being mixed with and dissolved into water, Polycarboxylate Superplasticizer concrete admixture (Powder) can be changed into liquid of which density varies from 10% to 40%. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2. Recommended dosage: 0.2% of the weight of cementitious material in 1m3 of concrete. 3. Polycarboxylate Superplasticizer concrete admixture (Powder) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4. The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (Powder) is applied, since slump loss of concrete is closely related to it. 5. Polycarboxylate Superplasticizer concrete admixture (Powder) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 6. Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 7. When applying Polycarboxylate Superplasticizer concrete admixture (Powder) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8. When Polycarboxylate Superplasticizer concrete admixture (Powder) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1. Polycarboxylate Superplasticizer concrete admixture (Powder) for powder: Woven fabric bag with plastic liner. Net weight: 20kg +/- 0.13 kg. 2. Polycarboxylate Superplasticizer concrete admixture (Powder) needs to be stored in well-ventilated and dry place. 3. Keep Polycarboxylate Superplasticizer concrete admixture (Powder) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it's been opened and repacked. 20kg/bag, 12 tons loaded in a 20ft.
