Carbon Blocks used in furnace having a great alternative against Petcoke. As it has high melting power and cheap as compared to Petcoke. Here in India, we are a supplier and exporters of Carbon blocks. Parameters- Total moisture (Mt): 1.80% Ash(Aad): 13.07 Volatile matter (Vad): 13.94 Fixed Carbon (FCad): 77.88 Sulfur (S): 3.10
Horizontal high vacuum brazing furnace is used for the vacuum brazing of materials like non-ferrous metal, stainless steel, titanium alloy, high temperature alloy, cemented carbide, etc.
It is used for the solution treatment of titanium alloy in aerospace industry, such as TC4, TC16, TC18, TC21, beryllium bronze in aircraft instrument elastic elements; precision alloy in aircraft sensor like Ni-based and Co-based high elastic alloy 3J1, 3J21, Ni-based constant elastic alloy 3J53, stainless steel in the field of nuclear energy like17-4PH, 410.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Capacity: 0.5L/1L; Heat retention after 6h >= 78 C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: PP Plastic material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted
Capacity: 0.45L; Heat retention after 6h >= 78 C; Body: PP Plastic material, customized patterns and colors, handle/carrier options; Lid: PP Plastic material, can be used as a cup; Stopper: PP Plastic material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted
Capacity: 2L; Heat retention after 6h >= 78 �°C; Body: Tinplate material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: PP Plastic material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1.8L; Heat retention after 6h >= 78 �°C; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, just loosen to get water without disassembling; Bottom: PP Plastic material, skid resistance, easy to disassemble; Glass refill: Wide mouth, high quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 2L; Heat retention after 6h >= 78 C; Body: Tinplate material, customized patterns and colors; Lid: Aluminum material; Stopper: Aluminum and cork material, easy to handle; Bottom: Aluminum material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 1L; Body: PP Plastic material, customized patterns and colors; Lid: PP Plastic material, can be used as a cup; Stopper: PP Plastic material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Hanger: Portable; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted;
Capacity: 0.5L; Heat retention after 6h >= 78 C; Body: PP Plastic material, customized patterns and colors, handle/carrier options; Lid: PP Plastic material, can be used as a cup (double cup); Stopper: PP Plastic material, easy to handle; Bottom: PP Plastic material, skid resistance, easy to disassemble; Glass refill: High quality, produced with Japanese technology, excellent heat retention rate; Color and Pattern: Optional or customized; Logo: Rang Dong; OEM: Accepted