Salient Features Highly efficient 3-Phase Water Filled Motor - 100% EC grade copper winding - Easily Rewindable - Motor Designed with Higher Cooling Effect Ensures Longer Life - Sustainable uniform performance for years - Ensures long life durability - Optimized Hydraulic & Mechanical Design - Improved efficient performance - Excellent output in Low Radiation - Dynamically balanced design - Zero maintenance Product Specification Power Range : 3.0 HP to 10.0 HP Operating Speed : 0 - 2890 RPM Operating Frequency : 0 â?? 50 Hz Input Solar DC Power Range : 3000 Wp, 10000 Wp Input Solar DC Voltage Range : 330 Vmp , 600 Vmp Head Range : 10 Mtr , 50 Mtr Discharge Range : 126000 LPD , 425000 LPD Type of Duty : S1 Material Of Construction Part Grade Oil Seal : Nitrile butyl rubber Motor Shaft : SS - 420 Motor Body : Cast Iron / J4 Motor Bush : LTB-4 / Teflon Thrust bearing assembly : SS - 420 & Carbon Base : Cast Iron Bracket : Cast Iron Flange : Cast Iron Casing : Cast Iron Impeller : Cast Iron
Highly efficient 3-phase Air Cooled motor - 100% EC grade copper winding - Easily Rewindable - Good suction lift characteristics - Sustainable uniform performance for years - Ensures long life durability - Optimized Hydraulic & Mechanical Design - Improved efficient performance - Excellent output in Low Radiation - Dynamically balanced design - Double shielded ball bearings, so no need of external lubrication - Mechanical seal or stuffing box is provided as per customers requirement - Zero maintenance Product Specification Power Range : 1.0 HP to 10.0 HP Operating Speed : 0 2890 RPM Operating Frequency : 0 - 50 Hz Input Solar DC Power Range : 900 Wp, 10000 Wp Input Solar DC Voltage Range : 110 Vmp, 600 Vmp Head Range : 10 Mtr, 50 Mtr Discharge Range : 45000 LPD - 405000 LPD Max. Suction Head : 7 Mtr Type of Duty : S1 Material Of Construction Part Grade Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
We are engaged in making Lead available in several forms including LME registered and non registered 99.97% and 99.99% as well as secondary ingots, foil, granules, powder, rod, shot, sheet, and wire. Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. Alloys include pewter and solder.
Sewage Pump - B
Inline Pressure Pump
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum
Product Specification Power Range : 1.0 HP to 2.0 HP Operating Speed : 0 - 3100 RPM DC Power Range : 900 Wp - 2000 Wp DC Voltage Range : 70 Vmp - 110 Vmp Head Range : 30 Mtr - 90 Mtr Discharge Range : 8000 LPD - 30000 LPD Type of Duty : S1 - Zero Running Cost - Less Maintenance - Eco-Friendly - Simple Installation - Pollution Free Material Of Construction - Motor Part Grade Mechanical Seal : Graphite Ceramic Motor Shaft : Stainless Steel Motor Body Pipe : SS-304 Lower Hosing : Aluminum Diaphragm : High Nitrile butyl rubber Top Cap : Stainless Steel Bottom Plate : Stainless Steel End Cap : Stainless Steel MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP Part Grade Outlet : SS-304 Suction : SS-304 Outer Shell : SS-304 Rotor Screw : Stainless Steel Stator : Rubber Coated Alloy MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP Part Grade Check valve housing : SS-304 Check valve : PC Suction : SS-304 Outer Shell : SS-304 Impeller : POM Bowl : PC Pump Bush : NBR Pump Sleeve : Stainless Steel Pump Shaft : Stainless Steel Coupling / Pump Couple : Stainless Steel
Fuel like diesel en590, jet fuel a1, lngg, lpg, copper cathode, a7 ingots, used rails, agri products like sugar, wheat, rice, soyabean etc, sunflower oil, valves & fasteners, spare parts for machineries. construction equipments like concrete machines, crushers, sand washing plants, material handling equipments, and construction materials, coal, diesel, machineries, tyres, generators, tyre shredder machines, fasteners, valves, epoxy, chemicals.Exporter
Salient Features Highly efficient 3-phase water filled motor - Easily rewindable - Dynamically balanced design - Extended life with flawless performance - Thrust bearing : Carbon + S.S. material for High thrust load capacity - 100% EC grade copper winding - Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps. - Zero maintenance - Superior performance - Sand proof operation - Highly efficient 3-phase water filled motor Product Specification Power Range : 1.0 HP to 20.0 HP Operating Speed : 0 - 2890 RPM Operating Frequency : 0 - 50 Hz Input Solar DC Power Range : 900 Wp, 20000 Wp Input Solar DC Voltage Range : 110 Vmp - 600 Vmp Head Range : 30 Mtr , 220 Mtr Discharge Range : 10000 LPD - 420000 LPD Type of Duty : S1 material of construction - motor Part Grade Body Lock : Spring Steel Stud Ring : M.S. (Zinc Coated) Stator Stamping : CRNGO - M45 Silicon Winding Wire : 100% EC Copper Shaft : SS-420 Rotor Stamping : CRNGO - M45 Silicon Copper Lamination : 100% EC Copper Upper Housing : SS-304 Lower Housing : SS-304 Connection Piece : SS-304 Oil Seal : NBR TB Set : Carbon + SS Base : SS-304 Drain Plug : Brass Couple Sleeve : Stainless Steel Water Bolt : Brass MATERIAL OF CONSTRUCTION PUMP Part Grade Suction : SS-304 Couple : Stainless Steel Couple Counter : SS-304 Rubber Seal : NBR Bush Seal Cover : SS-304 Bowl : SS-304 Impeller : SS-304 Key : SS-410 Bowl Bush : NBR Bush : LTB-4 Middle : SS-304 Cap : NBR Outlet : SS-304
Salient Features Submerged in water permantatly so no need of separate cabin Compact design suitable for minimum water level It also works on low voltage Noiseless and vibration free operation Installation without foot valve Easy installation and servicing MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour SHAFT : Stainless Steel 420 H&T TRUST BEARING : Stainless steel 304 tilting pad segment with carbon plate SEAL : Nitrile Rubber Oil Seal IMPELLER / ROTOR : Dynamically balanced WINDDING WIRE: Poly wrape Double coated copper wire
Salient Features Submerge in water permanently, so no need of separate cabin Priming is not require It also works on Low Voltage Noiseless and Vibration free operation Supplied with foot valve MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour TRUST BEARING : Thrust Plate With Fiber Pad and CT Bearing of Gunmetal BUSH BEARING : GM LTB 4 SEAL : Nitrile Rubber Oil Seal ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Dynamically balanced WINDDING WIRE : Poly Wrap Double coated copper wire HP 0.5 HP to 2.0 HP HEAD 7.5 Mtrs to 32.5 Mtrs CAPACITY :40 LPM to 480 LPM VOLTAGE : AC 180- 240 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 11 Nos. HP 1.0 HP to 30 HP HEAD 5 Mtrs to 75 Mtrs CAPACITY 40 LPM to 5200 LPM VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 166 Nos.
Salient Features Squirrel Cage Induction type totally enclosed Motor (TEFC). Single Phase with running Capacitor It also works on Low Voltage Easy installation and easy Servicing MOTOR BODY : Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Graded Cast Iron and Dynamically Balanced BALL BEARING : Reputed Make ZZ Ball Bearing SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal WINDING : Super enameled EC Grade Copper Wire HP 0.5 HP to 2.0 HP HEAD 6 Mtrs to 28 Mtrs CAPACITY 25: 550 LPM VOLTAGE : AC 180: 240 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 24 Nos. HP 0.5 HP to 25 HP HEAD 6 Mtrs to 86 Mtrs CAPACITY 25: 2100 LPM VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 53 Nos.
Salient Features Multi stage centrifugal pump with Radial & mixflow impeller It Operate Submerged Beneath The Surface Of Water Prime mover motors are wet type, water lubricated Easy installation and easy servicing It also works on low voltage Energy efficient design Good quality components and parts require less maintenance MOTOR BODY : Stainless Steel with 1% Nickel STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate BUSH BEARING : G.M. LTB 4 ROTOR SHAFT : Stainless Steel 420 H&T SEAL : Nitrile Rubber Oil Seal WINDING : Poly Wrape Double Coated Copper Wire PUMP BOWL : Graded cast Iron PUMP SHAFT : Stainless Steel 410 IMPELLER : Stainless steel casted dynamicaly balanced PUMP SLEEVE : Stainless steel with hard chrome plating HP 20.0 HP to 120 HP THREE PHASE 300- 415V HEAD 10 Mtrs to 150 Mtrs CAPACITY 1000 LPM to 4000 LPM VOLTAGE - AC 300- 415 V, 50 Hz, 2900 RPM NUMBER OF MODEL More than 800 nos.
Salient Features Multi stage centrifugal pump with Radial & mixflow impeller It Operate Submerged Beneath The Surface Of Water Prime mover motors are wet type, water lubricated Easy installation and easy servicing It also works on low voltage Energy efficient design Good quality components and parts require less maintenance MOTOR BODY : Stainless Steel with 1% Nickel STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate BUSH BEARING: G.M. LTB 4 ROTOR SHAFT : Stainless Steel 420 H&T SEAL : Nitrile Rubber Oil Seal WINDING : Poly Wrape Double Coated Copper Wire PUMP BOWL : Graded cast Iron PUMP SHAFT : Stainless Steel 410 IMPELLER : Stainless steel casted dynamicaly balanced PUMP SLEEVE : Stainless steel with hard chrome plating HP 10.0 HP to 80 HP THREE PHASE 300- 415V HEAD 15 Mtrs to 280 Mtrs CAPACITY 300 LPM to 2400 LPM VOLTAGE - AC 300- 415 V (Three Phase), 50 Hz, 2900 RPM NUMBER OF MODEL More than 800 nos.
Salient Features : Multi stage centrifugal pump with Radial & mixflow impeller It Operate Submerged Beneath The Surface Of Water Prime mover motors are wet type, water lubricated Easy installation and easy servicing It also works on low voltage Energy efficient design Good quality components and parts require less maintenance Janta model pump design for 6 motor & 7/8 pump for high discharge application at low cost MOTOR BODY : Stainless Steel with 1% Nicke STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hou THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plat BUSH BEARING : GM LTB ROTOR SHAFT : Stainless Steel 420 H& SEAL : Nitrile Rubber Oil Seal WINDING : Poly Wrape Double Coated Copper Wi PUMP BOWL : Graded cast Iron PUMP SHAFT : Stainless Steel 410 IMPELLER : Stainless steel casted dynamically balanced PUMP SLEEVE : Stainless steel with hard chrome plating HP 2.0 HP to 30 HP THREE PHASE 300- 415V HEAD 4 Mtrs to 228 Mtrs CAPACITY 350 LPM to 2150 LPM VOLTAGE - AC 300- 415 V (Three Phase), 50 Hz, 2900 RPM NUMBERS OF MODEL More than 800 Nos.
Multi Stage Centrifugal Pump With Radial & Mixflow Impeller It Operate Submerged Beneath The Surface Of Water Prime Mover Motors Are Wet Type, Water Lubricated Easy installation And Easy Servicing It Also Works On Low Voltage Energy efficient design Good Quality Components And Parts Require, less Maintenance 50 feet head per stage pumps are design for hihg head application Janta model pump design for 6 motor & 7/8 pump for high discharge application at low cost MOTOR BODY : Stainless Steel with 1% Nickel STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour THRUST BEARING Stainless Steel 304 Tilting Pad Segment with Carbon Plate BUSH BEARING : G.M. LTB 4 ROTOR SHAFT : Stainless Steel 420 H&T SEAL : Nitrile Rubber Oil Seal WINDING : Poly Wrape Double Coated Copper Wire PUMP BOWL : Graded cast Iron PUMP SHAFT : Stainless Steel 410 IMPELLER : Stainless steel casted dynamicaly balanced PUMP SLEEVE : Stainless steel with hard chrome plating 50 FEET HEAD PER STAGE PUMP : Pump bowl stainless steel investment casting SINGLE PHASE : 180- 240V THREE PHASE : 300- 415V HEAD 4 Mtrs to 465 Mtrs CAPACITY : 45 LPM to 1200 LPM VOLTAGE : AC 180- 240 V (Single Phase), 300 – 415 V (Three Phase), 50 Hz, 2900 RPM NUMBER OF MODEL : More than 800 nos. ISI MODEL : More than 300 nos.
