Guardrail barrier systems (Crash Barriers) are widely used for highway safety and fixed on the side of the roads especially on curves and slopes for preventing vehicles from riding out from roads. Features The barriers ensure minimum damage to the vehicle and its occupants During collision, the beam absorbs maximum energy by flattening out laterally and restrains the vehicle from veering over. Prevents the vehicle from skidding back onto the carriageway by controlling exit angles through gradual deceleration and effective redirection of the vehicle back on to the road. Enables quick repairs in case of accidents. All components are galvanized for longer life. Application To provide railing protection to motor vehicles at dangerous road areas such as steep slopes, high embankments, obscure curves/bends, sharp corners. To absorb sudden impact during collision thus minimizing injury to vehicle and passenger. To act as a directional railing for vehicles moving in the right direction. To act as a median barrier for avoiding head on collision. To act as a protective barrier for pedestrians along the highway.
Safety guard rails is mainly used for separating and defining aisle ways, large work areas, walkways and inside loading docks is always a challenge for industrial engineers, plant operations personnel and safety managers. Guardrail barriers often need to be removed temporarily for unobstructed maintenance or other access to an area. Layout flexibility and the ability to relocate barriers at minimal cost is an important factor. YunMei Safety Barrier provides a substantial highly visual physical barrier that addresses all of these issues. Finishes: Hot dipped galvanized. Material: Galvanized steel or other metals. Separates and Defines: Large work areas. Long walkways. Interior loading docks. Excellent Visibility: 36" tall curtain. 48" above the floor. Stops 200 pounds force with minimal deflection. Clean aesthetic appearance. Up to 60 Foot Span: Easy to install or relocate. Four anchors per post. 30 foot span also available. Simple Access When Needed: Simple operation. One person - two minutes or less to position or retract and store. Built in curtain storage system.
Metal guard rails for safety is mainly used for separating and defining aisle ways, large work areas, walkways and inside loading docks is always a challenge for industrial engineers, plant operations personnel and safety managers. Guardrail often needs to be removed temporarily for unobstructed maintenance or other access to an area. Layout flexibility and the ability to relocate barriers at minimal cost is an important factor. YunMei Safety Barrier provides a substantial highly visual physical barrier that addresses all of these issues. Finishes: Hot dipped galvanized. Material: Galvanized steel or other metals. Application: Steel guardrails provide a visual and physical barrier between traffic and work areas. It is used for protection against accidents due to lift trucks or other mobile equipment in dock areas, aisles, around special equipment, or offices. Using of steel guardrails reduces costly damage to equipment and inventory. Modular system is easily expanded or moved as needed. Suitable for indoor or outdoor use.
Highway steel guardrail systems for safety of various types are available. Standard followed: JT/T 281-2007, JT/T 457-2007. Materials for highway guardrails: Galvanized steel sheet. Application: Steel guardrails provide a visual and physical barrier between traffic and work areas. It is used for protection against accidents due to lift trucks or other mobile equipment in dock areas, aisles, around special equipment, or offices. Using of steel guardrails reduces costly damage to equipment and inventory. Modular system is easily expanded or moved as needed. Suitable for indoor or outdoor use.
For metallurgical coke, we can supply based on the following range of specifications: Fixed carbon: 80%~86% Sulphur: 0.7%~1.0% Ash:13.5%~18% Volatile matter: 1.5% max. Moisture: 8%~15% Size is customized
We supply foundry coke products with the range of specifications as follows: Fixed carbon: 85%~90% Sulphur: 0.5%^0.8% Volatile matter: 1.5% max. Size is customized ASH >8%/15%
Specs: 530*950/550*950 /550*1200/600*1200 other size can be customized
HIGH Quality graphite rod suitable for a wide range of applications in work hobby and workshop.
Baked graphite block with following specifications: Apprant density: 1.6g/cmâ?º min. Specific resistivity: 2 5 u m max. Ash:1.0% max. Sulphur: 0.3% max. Size: 3150mm X 630mm X 600mm Customized production available, please enquire.
SI 0.28 p 0.004% V.m 10 .15 ash 4.0% fe 0.25% resistivity 65 .90 Density 1.46g&cm compression strength 18mpa real density 1.98gcm
Silicon carbide si made from hte mixture of pure silica sand and green petroleum coke in ultra high power acheson furnace. Electric current is passed through t h e conductor,bringing about a chemical reaction ni which the carbon ni the coke and silicon ni the sand combined ot form SIC and carbon monoxide gas. Silicon carbide si With annual capacity for 60,000 tons of silicon carbide, we can provide different grade of silicon carbide to meet different clients' requirements, such as 70% SIC, 80% SIC, 85% SIC, 90% SIC, 93% SIC and 98% SIC, etc.We also provide customized size for 90% SIC and 98% SIC, such as 200 mesh and 325 mesh Fe203 Al203 Free carbon 3,5%MAX Moisture Size(mm) Ha-SIC-01 90% min. 1.5% max. 15.% max. 35.% max. 0.5% max. 1-5/1-10 HQ-SIC-02 90% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-10 HQ-SIC-03 88% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-1/1-10 HQ-SIC-04 98% min. 0.6% max. 0.6% max. 0.2% max. 0.5% max. 0-1/1-3 HQ-SIC-05 70% min. 2% max. 1% max. 10% max. 0.5% max. 1-10
FIXEDCARBON 95%MIN SULPHUR 0.3% ASH 3.5%,MAX VOLATILE MATTER 1.5%MAX MOISTURE 0.5%MAX SIZE 1.5
FIXED CARBON 98.5%MIN Sulphur 0.1%MAX Ash 0.7%Max Volatile matter 0.8%MAX moisture 0.5%max Size 1.5 mm
Fixed carbon 99% min. Sulphur 0.03%max. Ash 0.5% max. Volatile matter 0.5% max. Moisture Size (mm) HQ-GES-01 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1
Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate. Item HQ-SGPC-01 Fixed carbon Sulphur 98.5% min. 0.1% max. Ash 0.7% max. Volatile matter Moisture Size(mm) HQ-SGPC-02 98.5% min. 0.2% max. 0.7% max. HQ-SGPC-03 98.5% min. 0.3% max. 0.7% max. HQ-SGPC-04 98% min. 0.5% max. 1% max. HQ-SGPC-05 98% min. 0.8% max. 1% max. 0.8% max. 0.5% max. 0.8% max. 0.5% max. Graphite Electrode Scrap(GES) Item Fixed carbon Sulphur Ash HQ-CPC-01 98.5% min. 0.5% max. 0.7% max. HQ-CPC-02 98.5% min. 0.8% max. 0.7% max. HQ-C PC -03 98.5% min. 1% max. 0.5% max. HQ-CPC-04 98.5% min. 2% max. 0.5% max. HQ-CPC-05 98.5% min. 3% max. 0.5% max. Size(mm) 1-3/1-5 1-5/30-60 1-3/5-20 1-5 0-2 Item Fixed carbon Sulphur Ash Volatile matter Moisture Size (mm) HQ-GES-01 99% min. 0.03%max. 0.5% max. 0.5% max. 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1 * Other sizes and specifications are available,please enquire - HENGQIAOCARBON 1% max. 1% max. 0.5% max. 0.5% max. 0.8% max. 0.5% max. 1-5 3-8 1-5 1-5 1-5 Green petroleum coke 144 shaft kiln for petcoke calcined 1% max. 0.5% max. Crush Sieving Packing Volatile matter Moisture 0.8% max. 0.5% max. 0.8% max. 0.5% max. 1% max. 0.5% max. 1% max. 0.5% max.
High-quality green petroleum coke is taken into Acheson furnace for graphitization process with temperature around 2500-3600 �°C.The product has higher degree of graphitization with nitrogen content is lower than 300ppm.This product, with lower sulpur and ash content, is ideal recarburizer for steelmaking and foundry industries. Fixed carbon 99% min. Sulphur 0.03% max. Ash 0.5% max. 0.7% max. 1% max. 1% max. Volatile matter 0.5% max. 0.8% max. 1% max. 1% max. Moisture 0.5% max. 0.5% max. 0.5% max. 0.5% max. Size(mm) 1-3/1-5 1-5/5-10 0.2-1 0-0.5 2 HQ-GPC-02 98.5% min. 0.05% max. HQ-GPC-03 98% min. 0.07% max. HQ-GPC-04 98% min. 0.1% max. ä¸? è??楺碳表 HENGGIAO CARBON Semi-graphite Petroleum Coke(SGPC) Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate.
Calcined petroleum coke is solid petroleum coke product with black and dark gray color,shine with metallic luster,porosity and composed with micro-graphite crystals.It is the carbon material in the form of granular,columnar and acicular. Type Fixed carbon(Min) Ash(Max) Volatile Matter(Max) Moisture(Max) Sulfur content(Max) Nitrogen content(Max) Calcined petroleum coke 98.5% 0.50% 0.50% 0.50% 0.5% 300ppmSize:1-5mm,1-3mm,or as customer request. Application: 1,Calcined Petroleum Coke can be widely used for producing Anode Paste and Prebaked Carbon Anode for electrolytic Aluminium,application as additive in graphite electrode and carbon raiser production,also used as fuel for silicon. 2,Used as basic raw material for carbon additive and foaming agent. 3,Used in chemical industry as the basic source of sodium hydride and high
UREA Its main characteristics are low dosage, convenient use, low usage cost, fast crop absorption, and extremely high nutrient utilization rate. In this way, people can completely design formulas based on the nutritional requirements required for crop growth. Scientific formulas will not cause fertilizer waste, making their fertilizer utilization rate about 2-3 times that of conventional compound chemical fertilizers (in China, the fertilizer utilization rate of ordinary compound fertilizers is only 30% -40%). Secondly, water-soluble fertilizers are quick acting fertilizers, allowing growers to quickly see the effectiveness and performance of fertilizers, The fertilizer formula can be adjusted at any time according to different crop growth trends. CAS No.: 57-13-6 Formula: CH4n2o EINECS: 200-315-5 Certification: ISO9001, TUV, GMP, ISO, CE Application: Vegetables, Flowers, Fruit Appearance: Powder
NPK 15 15 17 Fertilizer NPK 20 20 20 and DAP Fertilzers packaed in 9.5KG/25KG/50KG PP woven bag with PE liner; packaged in 500kg/1000kg/1250kg jumbo bag lined with PE bags inside; packaged customized as per clients' request chemical Granular 2 - 4mm npk suspension fertilizers Delivery Time:15 days
UREA Its main characteristics are low dosage, convenient use, low usage cost, fast crop absorption, and extremely high nutrient utilization rate. In this way, people can completely design formulas based on the nutritional requirements required for crop growth. Scientific formulas will not cause fertilizer waste, making their fertilizer utilization rate about 2-3 times that of conventional compound chemical fertilizers (in China, the fertilizer utilization rate of ordinary compound fertilizers is only 30% -40%). Secondly, water-soluble fertilizers are quick acting fertilizers, allowing growers to quickly see the effectiveness and performance of fertilizers, The fertilizer formula can be adjusted at any time according to different crop growth trends. CAS No.: 57-13-6 Formula: CH4n2o EINECS: 200-315-5 Certification: ISO9001, TUV, GMP, ISO, CE Application: Vegetables, Flowers, Fruit Appearance: Powder
