Description
1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration.
2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal.
3. Good oxidation resistance, low tin slag and cost savings.
4. Solder joint is bright, full and uniform.
5. Economical and can produce the lowest consumption of the solid solder joints.
Application
Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.
About THE Product :
Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement).
Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications.
Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties.
Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste.
Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water.
Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium.
GBFS : (Granulated Blast Furnace Slag)
Source : Granulated BF Slag From Gujarat State, India
Supply Quantity : 50,000 Metric Tons Per Month
Packing: Bulk
Parameters (% BY MASS)
CaO 30-38
Al2O3 15-20
SiO2 30-40
Glass Content 85-97
MgO 8-11
Fe2O3 0.5-1.5
Moisture 10 MAX
Size -5mm Min 95, +5 mm Max 5
Relative Gravity 2.9
Bulk Density(Bagged) 1200 KG/M3
Titanium Dioxide, E171, CAS No.13463-67-7, is a naturally occurring oxide of titanium, available as white powder. the naturally occurring oxide of titanium. It appears as a white powder and is often used as food coloring in cheese products, processed fruit, fat spreads, candy, etc. When used as a pigment, it is called titanium white.
As an experienced Titanium Dioxide manufacturer and supplier, we has been supplying and exporting Titanium Dioxide for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.
Titanium Dioxide Specification
ITEM STANDARD
CHARACTERISTICS WHITE POWDER
IDENTIFICATION D.PALE YELLOWISH COLOR AT HEATINGE. ORANGE-RED COLOR WITH H2O2F. VIOLET-BLUE COLOR WITH ZINC
LOSS ON DRYING 0.23%
LOSS ON IGNITION 0.18%
WATER SOLUBLE SUBSTANCE 0.36%
ACID SOLUBLE SUBSTANCE 0.37%
LEAD 10PPM MAX
ARSENIC 3PPM MAX
ANTIMONY <2PPM
MERCURY 1PPM MAX
ZINC 50PPM MAX
CADMIUM 1PPM MAX
AL2O3 AND /OR SIO2 0.02%
ASSAY(TIO2) 99.14%
Titanium dioxide is a white, odorless, and naturally occurring mineral compound that finds extensive use in various industries. It is most notably recognized as a white pigment in paints, coatings, plastics, and cosmetics due to its exceptional opacity and brightness. Titanium dioxide serves as an effective UV blocker in sunscreens, protecting the skin from harmful ultraviolet rays. In addition to its role in pigmentation and UV protection, it is employed as a catalyst in the chemical industry, and as a strengthening and opacifying agent in the food industry for items like confectionery, sauces, and toothpaste. Its versatility and ability to enhance color, protection, and strength make titanium dioxide an indispensable component in a wide range of everyday products.
179651 High Titanium Slag Furnace Suppliers
Short on time? Let High Titanium Slag Furnace sellers contact you.
Titanium dioxide, also known as Titanium (IV) or Titania, is a simple inorganic compound produced as a pure white powder with the molecular formula TiO2. Generally, it is available in two main crystal forms, which are rutile and anatase. Anatase is economical, easily dispersed in water-based systems, and a perfect opacifier. Untreated titanium dioxide (anatase) has TiO2 with a refractive index of 2.55. However, it is not commonly used in exterior (weather-exposed) paint applications except for highway paints.
Application: Paint and Coating Industry, Paper Industry, Cosmetics Industry, Food Industry, Plastic Industry etc.
We are an Exports of all types of Titanium Dioxide, ilmenite from China.
Grades we have
Description
1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method.
2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance.
3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry.
4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics.
5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings.
6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics.
7. B101 is an anatase of titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers.
719 - General Grade
719T - Premium Grade
519 - Chloride Grade
We are looking forward to working with you, and we offer you standard best quality and best prices of Titanium Dioxide For more details please reply.
Please response our email so we can provide you Technical Data Sheet and Prices CIF or CFR and Samples if required
Ground Granulated Blast Furnace Slag (GGBFS) is a by-product from the manufacture of Iron and a high-performance substitute to traditional cement that will rise the technical presentation of your application, improve its appearance and minimize its environmental impact. GGBS is used in combination with Portland cement to produce superior longer-lasting concrete. GGBS will improve performance in any situation, from housing to civil engineering applications.
GGBFS also improves the concrete toughness, reduces preservation and repair costs, progresses workability and compression features, extensions compressive and flexural strengths, decreases cement and water consumption, advances concrete grading and also improves impermeability and water resistance.
Arij Global Trading LLC is a professional Ground Granulated Blast Furnace Slag supplier. We are a global company operating in the fields of the mineral industry, trade, and logistics. Reliable and responsible entrepreneurship, combined with flexibility and innovative logistics solution, plus our motivated and skilled employees, our core proficiencies and efficient work processes, we continuously achieve an above-average value contribution.
GGBFS
Ground Granulated Blast Furnace Slag (GGBFS) is gained by grounding the Granulated Blast Furnace Slag into the desired fineness. This product is usually intended to be used in concrete either as an element of composite cement such as Blast furnace Cement/High Slag Blast Furnace Cement or as a straight addition to the concrete mix by the concrete producer.
GBFS
Granulated Blast Furnace Slag GBFS can be used like sand as an additional aggregate for building materials. Granulated Blast Furnace Slag is obtained by quickly chilling (quenching) the molten ash from the furnace with the help of water. Throughout this procedure, the slag becomes fragmented and changed into amorphous granules (glass).
Rutile is a relatively pure titanium dioxide. It has excellent properties such as high temperature resistance, low temperature resistance, corrosion resistance, high strength, and small specific gravity. It is widely used in military aviation, aerospace,navigation, machinery, chemical industry, seawater desalination, etc. Rutile itself is one of the necessary raw materials for high-end welding electrodes, and it is also the best raw material for the production of rutile titanium dioxide. The chemical composition is TiO2.
GENERAL TITANIUM DIOXIDE CR6618
CR6618 is a zirconium, aluminum and organic surface treated multipurpose rutile titanium dioxide pigment, it has average particle
size distribution, good whiteness, good dispersion, high gloss, good hiding power and high weather resistance properties. lt is
widely used in coating, paints, ink, leather, rubber and ink production.
Application Fields
Coating/Ink (solvent-based, tin-printing) /Leather, color paste and sheet/Paints /Plastic/Rubber
Carbon Blocks used in furnace having a great alternative against Petcoke.
As it has high melting power and cheap as compared to Petcoke.
Here in India, we are a supplier and exporters of Carbon blocks.
QUANTITY: BRM is able to supply up to 10.000 to 20.000 MT every 30 to 60 days in recurring shipments.
CONTRACT PERIOD: 12 (twelve) months with rolls and extensions.
TERMS OF DELIVERY: The mineral commodity will be delivered by incoterms FOB (Free on Board).
QUALITY: Available content will have a 22% TiO2 basis.
PRICE: The commodity is valued at U$300 MT FOB Brazil.
TRIAL: The SPOT Trial shipment shall consist of a total quantity of 540 MT +/- 10% of Titanium Slag or upon agreement.
PAYMENT: Parties agree that the payment will be made by LC, SBLC or TT as per 100%.
INSPECTION: Parties mutually agree that SGS or an internationally recognized first class independent surveyor company shall be appointed at loading terminal, to assess the quality and quantity of the cargo according to the provisions herein stated.
Guaranteed Grades: TiO2 22,9% / Al2O3 61,79% / CaO 8,43% / Fe2O3 2,56% / MgO 1,78% / SiO2 1,80% / C 0,10% / S 0,01% / Na 0,56% / ZnO 0,13% / CuO 0,02% / MnO 0,02%
We are an Exports of all types of Titanium Dioxide, ilmenite from China.
Grades we have
Description
1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method.
2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance.
3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry.
4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics.
5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings.
6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics.
7. B101 is an anatase titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers.
We are an Exports of all types of Titanium Dioxide, ilmenite from China.
Grades we have
Description
1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method.
2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance.
3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry.
4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics.
5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings.
6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics.
7. B101 is an anatase titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers.
We are an Exports of all types of Titanium Dioxide, ilmenite from China.
Grades we have
Description
1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method.
2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance.
3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry.
4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics.
5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings.
6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics.
7. B101 is an anatase titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers.
We are an Exports of all types of Titanium Dioxide, ilmenite from China.
Grades we have
Description
1. JTR-719 is an excellent general-purpose titanium dioxide produced by the sulfuric acid method.
2. JTR-739 is titanium dioxide produced by sulfuric acid method, which has excellent optical properties and weather resistance.
3. JTR-759 is a rutile titanium dioxide produced by the sulfuric acid method, which is specially designed for the printing ink industry.
4. JTR-799 is titanium dioxide produced by sulfuric acid method, suitable for high concentration master batch and plastics.
5. JTCR-539 is a coating grade titanium dioxide produced by the chlorination method. Applicable to all kinds of coatings.
6. JTCR-599 is a rutile titanium dioxide produced by the chlorination method, which is suitable for all kinds of plastics.
7. B101 is an anatase titanium dioxide, which is highly recommended for coatings, inks, paper, plastics, rubber, and chemical fibers.
