Find Verified High Quality C Purlin Roll Forming Machine Suppliers, Manufacturers and Wholesalers

Ginger (Zingiber Officinale) is a commodity that is highly valued in international markets for its aroma, pungency and high oil and Aleo resin content. Nigeria is the third largest exporter of ginger in the world after China and India. Most of the dried ginger that are available for international trade are simply sun dried over a few days, but artificial drying is also used in areas lacking a defined dry season to coincide with the harvest. The rhizome is dried to 10-12 percent moisture content. Dried ginger is usually presented in a split or sliced form. Splitting is said to be preferred to slicing, as slicing loses more flavor, but the sliced are easier to grind and this is the predominant form of dried ginger currently in the market

The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine. Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place. Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor. We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh - 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder) - 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder) Product Packing - 12.5/13/14 Kg Paper Bag inside 1 Poly Bag - 20/25 Kg Cartoon inside 1/2 Poly Bag - 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag Our range includes: - Dehydrated Garlic Flakes/Cloves (5-10mm) - Dehydrated Garlic Minced (1-3mm, 3-5mm) - Dehydrated Garlic Granules (G1, G2, G3) - Dehydrated Garlic Powder (80-100 mesh) -

Coriander seeds have a health-supporting reputation that is high on the list of the healing spices. In parts of Europe, coriander has traditionally been referred to as an "anti-diabetic" plant. In parts of India, it has traditionally been used for its anti-inflammatory properties. In the United States, coriander has recently been studied for its cholesterol-lowering effects. Coriander is known all over the world for its medicinal properties. It is a great source of potassium, iron, vitamins A, K, and C, folic acid, magnesium, and calcium that can heal many health issues.

Green pea is used in cookery (in fresh, canned and frozen condition) as well as yellow dried pea. Soups puree, salads, garnishes to various meat dishes are made of it, and also it is used for dish decoration. We can offer high quality yellow and green pea, from leading Ukrainian manufacturers. Our product is not infected with pea beetle and has a high gustatory index. Packing – 50 kg Net bags Green peas with following quality parameters: Moisture 14%max Broken 2% max Admixture 0.5% max Packing details: 25kg & 50kg PP bags or Bulk packing

The Cashew tree (Anacardium Occidentale) is a tropical evergreen native to the Americas but is now widely cultivated in Asia and Africa. Cashew in its natural form is a soft, white, meaty kernel contained within the hard shells of kidney shaped, raw cashew nuts. Cashew is consumed all over the world as a snack or used as a food ingredient. Every year, the world eats more than 600,000 metric tons of cashew. And fortunately, it’s a very healthy food. Cashew nuts are among the most nutritious nuts in the world. Cashew Nuts are low in fat, have zero cholesterol, are high in protein, and include a large amount of important vitamins and minerals. Every single cashew nut comes from its own cashew apple, which are grown on cashew trees and thrive in tropical climates. The nuts are then collected, dried, shelled, peeled, graded, and roasted.

Cloves offer many health benefits, some of which include providing aid in digestion, having antimicrobial properties, fighting against cancer, protecting the liver, boosting the immune system, controlling diabetes, preserving bone quality, and containing anti-mutagenic properties, as well as fighting against oral diseases and headaches, while displaying aphrodisiac properties as well. Cloves are one of the spices indigenous to Asian countries like Indonesia, India, Pakistan, and even areas of East Africa. It is native to the Maluku islands in Indonesia. Cloves are a popular flavouring agents used in a variety of ways across the world, particularly in Asia. Cloves form the culinary base in a number of different Asian cuisines. Better Digestion: Cloves improve digestion by stimulating the secretion of digestive enzymes. Cloves are also good for reducing flatulence, gastric irritability, dyspepsia and nausea. Cloves can be roasted, powdered, and taken with honey for relief in digestive disorders. Antibacterial Properties: Cloves have been tested for their antibacterial properties against a number of human pathogens. The extracts of cloves were potent enough to kill those pathogens. Clove extracts are also effective against the specific bacterium that spreads cholera.

Herbal/folk tradition - Onion has an ancient reputation as a curative agent, highly extolled by the schools of Galen and Hippocrates. It is high in vitamins A, B and C and shares many of the properties of garlic, to which it is closely related. Raw onion helps keep colds and infections at bay, promotes strong bones and a good blood supply to all tissues. It acts as an effective blood cleanser that, along with the sulfur it contains, helps to keep the skin clear and in good condition. It has a sound reputation for correcting glandular imbalance and weight problems; it also improves lymphatic drainage, which is often responsible for edema and puffiness. It has long been used as a home simple for a wide range of conditions. Aromatherapy/home use-- Non, due to its offensive smell. Other uses -- used in some pharmaceutical preparations for colds, coughs. The oil is used extensively in most major food categories, especially meats, savories, salad dressings, as well as alcoholic and soft drinks. It is not used in perfumery work. Distribution -- native of Western Asia and the Middle East; it has a long history of cultivation all over the world, mainly for culinary use. The essential oil is produced mainly in France, Germany and Egypt from the red onion. Extraction -- essential oil by steam distillation from the bulb. Characteristics -- a pale yellow or brownish-yellow mobile liquid with strong, unpleasant, sulfur odor with a tear producing effect. Actions -- anthelmintic, anti-microbial, antirheumatic, antiseptic, antisclerotic, antispasmodic, antiviral, antibacterial, carminative, depurative, digestive, diuretic, expectorant, fungicidal, hypocholesterolemic, hypoglycemic, hypotensive, stomachic, tonic, vermifuge.

Mace Botanical: Myristica fragrans Family: N.O. Myristicaceae Hindi Name: Mace - Javitri General Description: Nutmeg, spice consisting of the seed of the Myristica fragrans, a tropical, dioecious evergreen tree native to the Moluccas or Spice Islands of Indonesia. Geographical Sources The nutmeg tree, Myristica fragrans, is indigenous to the Moluccas in Indonesia but has been successfully grown in other Asian countries and in the Caribbean, namely Grenada. Banda Islands, Malayan Archipelago, Molucca Islands, and cultivated in Sumatra, French Guiana Composition -> Nutmeg and mace contain 7 to 14 percent essential oil, the principal components of which are pinene, camphene, and dipentene. Nutmeg on expression yields about 24 to 30 percent fixed oil called nutmeg butter, or oil of mace. Dried kernel of the seed. Varieties -> Whole nutmegs are grouped under three broad quality classifications: 1. Sound: nutmegs which are mainly used for grinding and to a lesser extent for oleoresin extraction. High quality or sound whole nutmegs are traded in grades which refer to their size in numbers of nutmegs per pound: 80s, 110s and 130s (110 to 287 nuts per kg), or 'ABCD' which is an assortment of various sizes. 2. Substandard: nutmegs which are used for grinding, oleoresin extraction and essential oil distillation. Substandard nutmegs are traded as 'sound, shrivelled' which in general have a higher volatile oil content than mature sound nutmegs and are used for grinding, oleoresin extraction and oil distillation; and 'BWP' (broken, wormy and punky) which are mainly used for grinding as volatile oil content generally does not exceed 8%. 3. Distilling: poor quality nutmegs used for essential oil distillation.Distilling grades of nutmegs are of poorer quality: 'BIA' or 'ETEZ' with a volatile oil content of 8% to 10%; and 'BSL' or 'AZWI' which has less shell material and a volatile oil content of 12% to 13%. Method of Processing -> When fully mature it splits in two, exposing a crimson-coloured aril, the mace, surrounding a single shiny, brown seed, the nutmeg. The pulp of the fruit may be eaten locally. After collection, the aril-enveloped nutmegs are conveyed to curing areas where the mace is removed, flattened out, and dried. The nutmegs are dried gradually in the sun and turned twice daily over a period of six to eight weeks. During this time the nutmeg shrinks away from its hard seed coat until the kernels rattle in their shells when shaken. The shell is then broken with a wooden truncheon and the nutmegs are picked out. Dried nutmegs are grayish-brown ovals with furrowed surfaces. Large ones may be about 1.2 inches long and 0.8 inch in diameter. Taste and Aroma: Nutmeg has a characteristic, pleasant fragrance and slightly warm taste

Castor meal is also variously called castor meal, castor residue, castor extract & de-oiled castor cake Castor meal - the residue obtained from castor cake by the solvent extraction process - is one of the most versatile natural manures. It is truly organic manure which enhances the fertility of the soil without causing any damage or decay. It is enriched with the three big elements vital and conducive to the proper growth of crops - Nitrogen, Phosphorus and Potassium. It also has traces of nutrients like Manganese, Zinc and Copper, thus making it a balanced fertilizer. Moreover, it helps to neutralize the detrimental effects of chemical fertilizers. Apart from their contribution to Nutrients, they have a number of benefits in agriculture, which none of the synthetic fertilizers or pesticides can offer. They bring in the wonderful molecules that nature has designed to help the plants flourish naturally. They provide slow and steady nourishment, stimulation, protection from soil nematodes and insects; improve yields, and quality of product like taste, flavour, amino acid composition etc. The pressed cake obtained after the expression of castor bean. The solvent extracted cake, although rich in protein cannot be used as cattle fodder because of its toxicity. However, it can be used as a fertilizer. The protein content of castor seed meal varies from 21-48% depending upon the extent of decortications. It has an ideal amino acid profile with moderately high Cystine, mithionine, and isoleucine. But its ant nutritional substances, ricin, ricine and an allergen restrict its use in poultry feed, even at a very low level of inclusion. Castor Cake is an excellent fertilizer because of high content of N (6.4%), Phosphoric Acid (2.55%) and Potash (1%) and moisture retention. There is negative correlation between the contents of ricinine in castor seeds and oil content (r = -0.76). This content of ricinine in castor seed is determined by Agro climatic conditions. Nutrient content of Castor Cake: Organic matter - 75 - 80 %, Nitrogen - 4.0 - 4.5 %, Phosphorous - 1.5 %, Potassium - 1.25 - 1.5 %. It also contains some micro nutrients viz., Calcium, Magnesium, Sulphur, Iron, Zinc, Manganese, Copper etc. A typical composition of castor residue/meal is as follows: Nitrogen - 4% min. approx. Phosphorous - 1% min. approx. Potassium - 1% min. approx. Moisture - 10 - 12 % max. approx. Oil Content - 0.7% max. approx. Advantages: 1. It provides all the major & minor nutrients necessary for better plant growth. 2. It also helps in increasing the nutrient uptake by plants. 3. It improves the soil fertility and productivity. 4. It is known to protect the plants from nematodes and termites. 5. It improves the yield & quality of the farm produce. 6. It improves the physical, chemical and biological properties of soil

Marigolds were first discovered by the Portuguese in Central America in the 16th century. Marigolds are hardy, annual plants and are great plants for cheering up any garden. Broadly, there are two genuses which are referred to by the common name, Marigolds viz., Tagetes and Celandula. Tagetes includes African Marigolds and French Marigolds. Celandula includes Pot Marigolds. Kingdom : Plantae Division : Magnoliophyta Class : Magnoliopsida Order : Asterales Family : Asteraceae Genus : Tagetes, Calendula Marigolds come in different colors, yellow and orange being the most common. Most of the marigolds have strong, pungent odor and have has great value in cosmetic treatment. There are many varieties of Marigolds available today. Some of the major Marigold varieties are listed below: African or American Marigolds (Tagetes erecta): These marigolds are tall, erect-growing plants up to three feet in height. The flowers are globe-shaped and large. Flowers may measure up to 5 inches across. African Marigolds are very good bedding plants. These flowers are yellow to orange and do not include red colored Marigolds. The Africans take longer to reach flowering stage than the French type. French Marigolds (Tagetes patula): Marigold cultivars in this group grow 5 inches to 18 inches high. Flower colors are red, orange and yellow. Red and orange bicolor patterns are also found. Flowers are smaller, (2 inches across). French Marigolds are ideal for edging flowerbeds and in mass plantings. They also do well in containers and window boxes. Signet Marigolds (T. signata 'pumila'): The signet Marigolds produce compact plants with finely divided, lacy foliage and clusters of small, single flowers. They have yellow to orange colored, edible flowers.The flowers of signet marigolds have a spicy tarragon flavor. The foliage has a pleasant lemon fragrance. Signet Marigolds are excellent plants for edging beds and in window boxes. Mule Marigolds: These marigolds are the sterile hybrids of tall African and dwarf French marigolds, hence known as mule Marigolds. Most triploid cultivars grow from 12 to 18 inches high. Though they have the combined qualities of their parents, their rate of germination is low. Marigold (Calendula) is an extremely effective herb for the treatment of skin problems and can be used wherever there is inflammation of the skin, whether due to infection or physical damage; for example, crural ulceration, varicose veins, haemorrhoids, anal fissures, mastitis, sebaceous cysts, impetigo or other inflamed cutaneous lesions. As an ointment, Marigold (Calendula) is an excellent cosmetic remedy for repairing minor damage to the skin such as subdermal broken capillaries or sunburn. The sap from the stem is reputed to remove warts, corns and calluses.

Peanuts are popularly used as seed oil in India. They are easily available round the year and almost everywhere in India. They are easily available round the year and almost everywhere in India. Peanuts are also taken as snacks in many households especially in India. In reality, peanuts are actually legumes. But since they have all the properties of nuts like almonds, cashew nuts, etc., these are also included in the family of nuts. Groundnut/Peanuts are known as Moongphali in India. India is one of the largest producers of groundnuts in the world. The special variety peanut of this area (Saurastra, Gujarat) is world famous in its flavor, taste and aroma. Raw Groundnut valued for its protein contents, which is of high biological value. Groundnut contains more protein then meat, two and half more than eggs and more than any other vegetable food. It also contains phosphorous, thiamin and niacin that help in building resistance against all infections, such as Hepatitis and tuberculosis. We can offer Groundnut/Peanuts Peanuts Long Type (Bold Type): Long/Bold Type 38-42, 40-50, 50-60, 60-70, 70-80, and Crushing Grade Quality Counts/Ounce Peanut Round Type (Java Type): Round Type(Java Type) 40-50, 50-60, 50-60, 60-70, 70-80, 80-90, 90-100, 140-160 Counts/Ounce Jute Bags Packing: - We shall be able to provide in 5Kg, 10 kg, 15 Kg, 25 kg and 50 Kg jute bags packing. Vacuum Packing: - For special requirements for our buyers, we can provide the cargoes in 10 kg, 12.5 kg and 25 kg vacuum packed PP bags

Vacuum roll kneading machine for various kind meat process Widely used in sausage,ham,bacon,barbecue and poultry,soy sauce,leisure meat food processing ,capacity 750-2000kg/hour welcome order !

Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.

AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.

Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.

Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.

Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration. Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe. Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes. It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.

Quality: Stable, Good elasticity and Flexibility, self-life over 12 months Application: Agricultural, Industrial, Electronic, Household, Tie Money, Flower, Hair, Package and Food, etc. Can be used widely as gifts, decorations, mechanical equipment, making gloves, etc.

- Material: Natural bamboo 100% - Type: 4 steps, 5 steps,... - Process: Clean, no defects, polished, colored or natural, Coated with gloss paint, fumigated.