Front bumper with Stone guard
Front bumper fender side skrits rear bumper w204 c63 amg wide body kit for mercedes ben z 2009-2011 up Product name Mercedes c class w204 am-g body kit Style A-mg Material Pp Delivery time Some in stock while some need time producing, details please contact us Product list Material Pieces Front bumper Pp 1 pc Side skirt Pp 2 pcs Rear bumper Pp 1 pc Fog lamp Fl 2 pcs
Advantage for EPP(the main feature): 1. Excellent heat-resistance property: The highest available temperature is 130° C, much higher than EPS and EPE. 2. The dimension of EPP product is very stable. 3. The lower weight: As the relative density is small, the same foaming ratio is small than other foaming materials. 4. Excellent buffering property: Good toughness and hardness. 5. Wide range of temperature: It still has good cushioning property below 40° C. 6. Good adiabaticity and floatability: Among 8~45 times, all materials have good cushioning property and heat insulting property. 7. Anti oil and anti chemicals EPP is closed and independent bead, low heat conductivity and low water absorption rate, with these characters, it can be used as heat insulating material and floating material. 8. High quality of anti oil and anti chemicals. 9. No toxic, it doesnot contain poisonous foamer and assistant, it is harmless to human beings 10. High energy absorbing: EPP has good quality of toughness, and it won't be fatigue after repeated usage... 11. Environmental protection: The EPP wrong crosslinking foaming body, non-toxic, 100% biodegradable, can be recycled, Saving energy and resources. 12. Long service life and application of a PMC aspect, can be in logistics multiple recycling. PE bag+carton.
FOG LAMP COVER FOR NISSAN ALTIMA 2013 OEM:LH: 62257-3TA0A /RH: 62256-3TA0A PLINK:LH: NI1038114 /RH: NI1039114 W/O LAMP HOLE
FOG LAMP COVER FOR NISSAN ALTIMA 2013 OEM:LH: 62257-3TA0A /RH: 62256-3TA0A PLINK:LH: NI1038114 /RH: NI1039114 W/O LAMP HOLE
FRONT BUMPER FOR SKODA FABIA 00-04' OEM:6Y0807221 W/O LAMP WASHER HOLE W/FRONT LAMP HOLE
FRONT BUMPER FOR VOLKSWAGEN POLO 09-13' 5D & HATCHBACK OEM: 6R0807221RGRU W/O LAMP WASHER HOLE
FRONT BUMPER COVER FOR TOYOYA PRIUS 16-ON OEM: 52119-47964 P-LINK: TO1000419 W/PARKING SENSORS HOLE
FRONT BUMPER FOR TOYOYA PRIUS 16-17' W/O SENSORS OEM: 52119-47961 / 5211947961 P-LINK:TO1000418
FRONT BUMPER RETAINER FOR TOYOTA PRIUS (ZVW5) 16'- OEM LH: 52116-47050 / RH: 52115-47050 P-LINK LH: TO1042118/RH: TO1043128
FRONT BUMPER FOR TOYOTA CH-R 18' OEM: 52119-F4904
FRONT BUMPER BRACKET FOR LEXUS CT200 11' OEM:RH:52115-76010 / 52115-76011 LH:52116-76010 / 52116-76011
FRONT BUMPER FOR TOYOTA RAV-4 16' OEM: 52119-0R914 PLINK: TO1014105 W/O SENSOR HOLE
FRONT BUMPER FOR TOYOTA CAMRY SE MODEL 12' OEM:52119-06975 USA TYPE W/O TURBO
FRONT BUMPER FOR TOYOTA PRIUS 10-11' W/O SENSOR HOLE W/O HEAD LAMP WASHER HOLE (HALOGEN HEAD LAMP) OEM: 52119-47917 PLINK: TO1000359
Brand: Mercedes-Benz Model: W205 Specification: C43AMG Year: 2017 Type: Front Bumper Color: White Item Location: Singapore. Shipping Charges extra. Tags: Mercedes Benz parts, Mercedes used parts, bumper, spare parts, body kit, scrap parts.
Quick Details Place of Origin: Jiangsu, China (Mainland) Brand Name: Yoonshan Model Number: Standard Size Position: Front Bumper Material: Plastic, Plastic Car Make: for HYUNDAI I10 2011 OE NO.: 86511-0X200 Size: Standard Product Name: Car front bumper Package: Standard Carton Box MOQ: 10pcs Quality: 100%tested Application: Auto Industry Payment: Western Union ;T/T PORT: Guangzhou Ningbo Shanghai Delivery time: 15-30 DAYS Warranty: 1 Year Packaging & Delivery Selling Units: Single item Single volume: 30000 cm 3 Single gross weight: 3.0 kg Package Type: Neutral packing or according to client's instructions. Lead Time : Quantity(Piece) 1 - 1000 >1000 Est. Time(day) 10 To be negotiated
Auto parts car front bumper mold plastic injection mold A car bumper is a safety device that absorbs and mitigates external impact and protects the front and rear of the vehicle body. Generally consists of plastic bumpers, cushioning materials and beams. Plastic bumpers have strength, rigidity, and decorativeness. From a safety point of view, a car can play a cushioning role in the event of a collision and protect the front and rear body. From the appearance, it can be naturally combined with the car body to form a natural One body, with good decoration, has become an important part to decorate the appearance of the car. 1: Determination of bumper shell material Regulatory requirements: The front and rear protection devices of the car must ensure that the vehicle will not cause serious damage to the vehicle when a light collision of 4km / h occurs. In addition, the front and rear bumpers not only protect the vehicle and reduce vehicle damage, but also protect pedestrians and reduce the injuries to pedestrians in the event of a collision. Therefore, the shell material of the bumper should have the following characteristics: 1) With less surface hardness, it can reduce pedestrian injuries; 2) Good elasticity and strong resistance to plastic deformation; 3) Good vibration damping effect, can absorb more energy in the elastic range; 4) Resistant to humidity and dirt; 5) Has good acid and alkali resistance and thermal stability. Modern car bumper shells are mostly made of plastic or fiberglass. In order to reduce the cost of trial production, save mold production costs, and also shorten the trial production cycle, in the concept car trial production, consider using FRP glass fiber reinforced epoxy hand lay-up process. The materials of the bumper are generally PP + EPEM + T20 or PP + EPDM + T15. EPDM + EPP is also more versatile. ABS uses less and is more expensive than PP. The thickness of the bumper is usually 2.5-3.5mm, and the gas-assisted molding can be made thinner. Note that if the bottom mesh of the bumper is integrated with the bumper, the thickness of the mesh must be more than 2.0mm, and the die angle should be increased as much as possible (2 degrees or more). If the mesh is separate, the mesh wall of 1-1.5mm is sufficient.
Vacuum Form Mold for Car Front Bumper - Dalian Mintadely mould Co., Ltd. was established in Dalian in 2006, Mainly engaged in the design and manufacture of plastic mold China, injection mold China, China mould, automobile parts mold of semiconductor, IC connector, lead frame electrical connection and motor fixed rotor, as well as various precision mold spare parts and spare parts. We guarantee to provide customers with excellent design and first-class quality products at any time and occasion. ISO 9001:2008 Certified Your Trusted Plastic Molds, Injection mold, Die Parts, Die Casting mold Partner in China. We are not only make molds and parts for you, but also your technical supporting team. Who using our mould: Meredes-Benz, BMW, Audi, Honda, Toyota, Volkswagen, Nissan, Mazda,etc. We have design department, laboratory and testing center and a R&D team with a strong technical and experienced to ensure continuous improvement and innovation of processes and products to meet the different needs of different customers. Apply ERP system, implement standard management in process, quality, delivery, product, service. Ensure customer's product quality and delivery time. With many years of experience in mold design, manufacture, molding, leading technical solutions and perfect quality service, we can keep our eyes on the global market while consolidating existing customers.
20 Pieces (Min. Order) Brand Name: KAP Model Number: 2016 for tacoma trd retrofitting grille Place of Origin: Jiangsu,China (Mainland) Material: - Product Name: front grille for toyota 2016 for tacoma Other name: high grade front grille
