SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Brand Name None Model Number ACR-101 access control reader IC card reader ic card reader 13.56MHZ card reader door access control solution RFID card reader unlock door via card work with Access control board push button power supply electromagnetic lock CE yes waterproof IP68 Output Format Wiegand 26/34 RS485/232 warranty 2 years communication distance WG=100M RS485=1200M proximity card reader 13.56MHZ card reader without keypad
The NV10 USB+ is a compact, stackerless banknote validator suitable for most applications. Accepting over 100 different world currencies the NV10 USB+ is a truly global product.
Multi-function 7-IN-1 USB 2.0 OTG Card Reader 7 in 1 OTG Adapter 8 PIN to 3 USB Port 2.0 HUB Host Sd hc/ms/m2/tf Card Reader Camera Connection Kit for iPad Air 1 2 / Mini 4. Description: 1. 7-IN-1 multifunction card reader camera kit with powered HUB. Pad 4 pad MINI Camera Connection Kit, connect to any digital camera. 2. Camera Connection Kit allows you to have two ways to import photos and videos .Camera Connector allows the use of a digital camera's USB cable to import your photos and videos from a digital camera to the Pad. Or, you can use SD / MS / TF Card Reader to import photos and videos, etc. directly from the camera's SD card. 3. USB HUB ports and card reader combo (card reader can read memory cards available in the market are five common) feature combination for the fourth generation of products, using original chips, you can connect the camera to the card reader. 4. This product comes with three USB ports, support for HUB expansion. 5. Please note this device will not work on an iPhone Supports iOS 9, 8 and 7.
USB 3.0 Compact Flash Multi Memory Card Reader And CF Adapter Installation: External Type: SD Card,XD Card,MMC Card,Memory Stick Card,SM Card,CF Card Brand Name: silencehe32 Card Slots: All in 1 / Multi in 1 Interface: USB Features: 100% brand new and high quality. Quantity:1PC USB 1.0/2.0 Support. True USB3.0 card reader, also compatiable with USB2.0/1.1. Truly Plug & Play and hot swapping. Fast Data/Files Access and Transfer Rate Super-Speed(Gbps)/High-Speed(480Mbps)/Full-Speed(12Mbps)/Low-Speed(1.5Mbps). No external power adapter needed. Powered directly by USB connector. Low power comsumption. 6 slots USB3.0 card reader. Easy to use Supports:SD, Micro SD/TF, CF card. Color:Gold.Silver.Black.
Item Model: BRC-131 USB Card Reader 1. All in 1 USB Card Reader 2. Slot : CF I/CF II 3. Slot: SDHC/SD/MMC/RS MMC 4. Slot : T-Flash /Micro SD 5. Slot : MS/MS PRO/MS DUO PRO/MS DUO/ MS MG/ MS Pro MG/ MS Duo MG 6. Slot: M2 7. Slot: XD Card 8. Material: ABS.
USB 2.0 high speed card reader Support: CF I/CF II/XD CARD/SD/MMC/MMC, /RS MMC/ ULTRA , SD/ extreme sd/ extreme, SD / MS/MS PRO/MS DUO PRO/MS DUO/ MS MG/ MS PRO MG/MS DUO MG/MMC MICRO CARD/MINI SD/M2/T-FLASH Support all format for windows, mac os, vista or higher. Pcs/ctn: 100, g.W:6.4kg, ctn size:45, 35, 37cm.
USB card reader *support usb2.0 *powered by usb connection cable *no external power required *led light clew read and write state *fully plug & play and hot swapping support high-speed data transfer *convenient for carrying, antiseismic, high temperature resistance *support: win98/me/2000/xp/mac os *support usb2.0 *powered by usb connection cable *no external power required *led light clew read and write state *fully plug & play and hot swapping support high-speed data transfer *convenient for carrying, antiseismic, high temperature resistance *support: win98/me/2000/xp/mac os
Usb card reader USB port 4-slot flash driver,Can re-write CF / CF II / MD /SM/ MS / MS-PRO / MS-DUO / MS-PRO-DUO / MS-MG / MS-PRO-MG / MS-ROM / SD / MMC / MMCII / RS-MMC / XD Card reader and so on, also supply 3 USB A/F Ports
Item md-cs0332 Product category usb single card reader Product model md-cs0332 Product detail 1.Support usb2.0 specification 2.Support sd\mmc compatible flash card 3.Support sd2.0\mmc4.1 specification 4.With the default driver for win2000/me/xp and mac os x 5.Support win98/2000/mac os 9 with driver availble from alcor corp. 6.Plain apple appearanceff Package terms: Blister
Usb card reader 1) support the hight - speed transmission mode 480mbps 2) fast and flexible for writing and reading data 3) supports windows 98/ se/ 2000/ me/ xp/ linux 2.4. X-mac os10.0 4) card supported: cf / cf ii / md / ms / ms-pro / ms-duo / Ms-pro-duo / ms-mg / ms-pro-mg / ms-rom / sd / mmc / Mmcii / mini-sd / rs-mmc / t-flash / sm cards
Utilizing the USB interface, the Fingerprint Reader is ideal for desktops or laptops. This compact and well designed unit is made to lead a finger smoothly to the right position and set on the sensor comfortably. With a sensing resolution of 500 dpi, this reader offers a high level of ease and comfort while at the same time helps ensure security. Main functions: Login Window system:login Window system by fingerprint identification instead of urer name and password. Fingerprint encrypt hard drive partition:it will create a secret area in the local disk .The user can save the private data into this area. Every data in this area was encrypted by AES arithmetic to assure data's safety.Only the one with the matched registered fingerprint info can see and operate this local drive area. Fingerprint encrypt/decrypt files/folders: you can encrypt/decrypt the important data with your fingerprint. It will keep your data safe without any unauthorized reading, alteration and deletion. Automatic web login:save the accounts and passwords key-in on web surfing or email login by fingerprint information.This feature releases the users from repetitively key-in or remembering many annoying accounts and passwords.It will remember and key-in your account and password information automatically by fingerprint identification next time you turn into these web pages. On one side,it keeps your account safe and no trace information about your account left on the web page;On the other side,it release you from remembering so many annoying accounts name and passwords. Secured notepad:the encrypted Notepad that saves the important information like agendas or itineraries can be opened only if the fingerprint is authenticated. Screen Saver Lock: to turn off the screensaver and back to Windows login,fingerprint authentification is required,it insure no one can login your computer even if you walked away. Fingerprint encrypted data backup / recovery:To prevent accidents resulting situation of registered fingerprint information damaged or lost, users can back up registered fingerprint information to a safe area , and encrypt the backup information, import it when needed,you can return to the original fingerprint registration information. Features & Specifications: Built-in sliding fingerprint sensor Bearing more than 1 million times of finger sliding USB2.0 port interface to PC Resolution: 500dpi; 192 x 16 pixels Finger pattern verifying time:
Utilizing the USB interface, the Fingerprint Reader is ideal for desktops or laptops. This compact and well designed unit is made to lead a finger smoothly to the right position and set on the sensor comfortably. With a sensing resolution of 500 dpi, this reader offers a high level of ease and comfort while at the same time helps ensure security. Main functions: Login Window system:login Window system by fingerprint identification instead of urer name and password. Fingerprint encrypt hard drive partition:it will create a secret area in the local disk .The user can save the private data into this area. Every data in this area was encrypted by AES arithmetic to assure data's safety.Only the one with the matched registered fingerprint info can see and operate this local drive area. Fingerprint encrypt/decrypt files/folders: you can encrypt/decrypt the important data with your fingerprint. It will keep your data safe without any unauthorized reading, alteration and deletion. Automatic web login:save the accounts and passwords key-in on web surfing or email login by fingerprint information.This feature releases the users from repetitively key-in or remembering many annoying accounts and passwords.It will remember and key-in your account and password information automatically by fingerprint identification next time you turn into these web pages. On one side,it keeps your account safe and no trace information about your account left on the web page;On the other side,it release you from remembering so many annoying accounts name and passwords. Secured notepad:the encrypted Notepad that saves the important information like agendas or itineraries can be opened only if the fingerprint is authenticated. Screen Saver Lock: to turn off the screensaver and back to Windows login,fingerprint authentification is required,it insure no one can login your computer even if you walked away. Fingerprint encrypted data backup / recovery:To prevent accidents resulting situation of registered fingerprint information damaged or lost, users can back up registered fingerprint information to a safe area , and encrypt the backup information, import it when needed,you can return to the original fingerprint registration information. Features & Specifications: Built-in sliding fingerprint sensor Bearing more than 1 million times of finger sliding USB2.0 port interface to PC Resolution: 500dpi; 192 x 16 pixels Finger pattern verifying time:
- metal case, anti-vadal, standalone - em compatiable reader - weather resistant (ip 66) - backlit keypad for easy nighttime use - user capacity: 1, 000 - support card access, pin access or card & pin access - pin length:4-6 digits between 0000-999999
1.Size:15cm*9cm*3.5cm 2.Weight:0.8kg 3.Material: metal 4.Verification speed:
1. Size:15cm*9cm*3.5cm 2. Weight:0.8kg 3. Material: Metal 4. Verification Speed: