En590 10Ppm And A1 Jet Fuel Suppliers and Manufacturers

Non Russian origin, Jet Fuel A1, FOB Rotterdam or FOB Houston, no advance payment, no deposit, seller able to do tank to vessel & tank to tank Rotterdam or Houston, please

**Professional Fuel Supply Offer** **Product:** - DIESEL, GAS , OIL , EN590, JET A-1, D1 , D2 D-6 - Monthly Quantity: 50,000 MT - 10,000,000 MT **Pricing:** - Prices: Negotiable - CIF terms available - EN590 FOB - Jet A-1 Fuel FOB - D1 FOB - D2 FOB - D6 FOB **Contact Information:** WhatsApp: +17705881989 WeChat: +14043768928 Email: wpaul@pbwmanufacturing.com **Requirements for Proceeding:** - Buyer to issue Irrevocable Corporate Purchase Order (ICPO) along with company Certificate - Buyer must have TSR **Storage Information:** - Fuel is stored at Vopak and Kinder Morgan, renowned Tier 1 Tank Storage Facilities in Rotterdam, Houston, Fujairah, Duqum, and Qatar. . TTT Procedure for FOB Dip and Pay, Rotterdam Port (E-tank / Non-negotiable) 1. Initial Steps: The buyer issues an Irrevocable Corporate Purchase Order (ICPO), company registration certificate, data page of the buyer's passport and an Authorization to Verify (ATV) the Tank Storage Agreement with the E-Tank provider. (Proof of funds will be waived if the ATV is successful.) 2. TSA Verification, CI and DTA: The seller verifies the TSA and upon successful verification, issues the Commercial Invoice (C.I). The buyer signs and returns the CI to the seller within 48 hours. The seller will also issue a DTA ( Dip Test Authorization) to be endorsed by the buyer and buyer's tank farm. 3. Proof of Product and Injection Schedule a. Injection Schedule: The seller releases the injection schedule to the buyer and the buyer's tank farm company. The buyer and their tank farm must sign and return these documents to the seller within 48 hours. b. Proof of Product (POP) Documents: Concurrently, the seller issues the following documents to the buyer: (a) Fresh SGS report (b) Product Passport (c) Injection Report (d) Unconditional DTA (e) Authorization to Sell and Collect (ATSC) (f) AuthorizationtoVerify(ATV) Option A �¢?? seller injects fuel into the buyer�¢??s tank. 4. Tank Storage Receipt: The buyer�¢??s tank storage company will issue a TSR for at least 5 days. The Lessee�¢??s name will include both the Buyer and the Seller. The refinery�¢??s name will also be included. 5. Injection of product into Buyer�¢??s tanks: Upon Buyer�¢??s confirmation of the POP documents in clause 5, Seller will commence injection of product into the Buyer�¢??s tank. 6. Dip Test: The Buyer is responsible for ordering SGS to conduct a dip test of the product in the Buyer�¢??s tank at the Buyer's expense. 7. Payment and Delivery: Following a successful SGS dip test, the Buyer must make a 100% payment via MT103/TT wire transfer for the total product within forty-eight (48) hours. The Seller will pay commissions to all intermediaries involved in the transaction within forty-eight (48) banking hours after confirmation of the Buyer's payment.

Product: JET FUEL A1 Origin: Russia/Kazakhstan price: to be discussed payment: SBLC/DLC Delivery: CIF/FOB Rotterdam. Destination: looking for buyer all over the world

Available products: JET A1/JP54, CRUDE OIL, D2, D6, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure. For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need. We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals. Send us LOI so that we can start processing the order. If you have any questions please do not hesitate to contact us! Available products: -JET A1 -JET JP54 -Diesel D2 Automotive, -EN590 10 PPM, -Diesel D6, -Diesel 10PPM & 50 PPM. -Mazut M100 -Bitumen -Crude Oil -Copper

Urea Fertilizer 46% N GOST 2081-92 Prilled Urea (Prilled) GOST 2081-92 Nitrogen: 46.0% MIN (ON DRY BASIS) Moisture: 0.5% Max Biuret %age By Weight: 1.0% MAX Particle Size (i) Material Passing thro ugh 2.8mm IS Sieve (Tyler Sieve 7) and retained on 1mm IS Sieve (Tyler Sieve 16) by weight i) To pass through 1mm IS Sieve by weight : 90% MIN,5% MAX MELTING POINT: 132 Degrees Celsius COLOUR: Pure white RADIATION: NON-Radioactive. FREE FLOWING: 100% Treated against caking, free from harmf ul substances. PHYSICAL: PRILLED, free from harmf ul substances, impurities & dust. FREE AMMONIA: 160 PXT, PPM. MAX. UREA 46%N Agriculture grade PRILLED | GRANULAR -GRADE EXTRA- | Total nitrogen: 46.2% min. | Humidity: 0.3% max. | Biuret: 1% max. | Allowed production class: 0.85-2 mm/2-4 mm. | Formaldehyde: 0.35 - 0.55% min. | Free Ammonia: 50 ppm. | Resistance to fragmentation: 3 kg for granule with a diameter of 3.15 mm. | Temperature: Max 50 min 5 | Density: 760 to 800 kg / m3 | Appearance: white Granules. -Get your shipment from our factory DIRECTLY. -We ship Urea 46%N either in Bulk loose in shipload OR FIBC 1Mt OR 50 kg bag package of woven polymeric laminated, polyethylene bags. -Two years validity in optimal storing conditions. -ETD 8000 Mt=10 days, prices vary according to packing terms

D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400. Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil.

Available stock in Rotterdam tank farm for jet fuel A1: CI DIP AND PAY FOB PROCEDURE 1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer. 2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice. 3.seller will provide the Proof of Product (PPOP) documents for product verification Which include ï?¼ Tank Storage Receipt (TSR) ï?¼ Certificate of origin ï?¼ Statement of Product Availability, ï?¼ Authorization to Verify (ATV), and ï?¼ Dip Test Authorization (DTA) Letter. 4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule. *Or* Buyer must have a minimum of 10 days TSR to avoid one day tank extension. 5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).

Application of nitrocellulose Nitrocellulose, also known as cellulose nitrate or nitrocellulose, is an organic polymer compound with the chemical formula (C6H7N3O11) n. It is the product of the esterification reaction between cellulose and nitrate, usually in the form of white or slightly yellow cotton fluff, insoluble in water, but soluble in organic solvents such as esters and acetone Nitrocellulose, also known as cellulose nitrate ester, abbreviated as NC, commonly known as nitrocellulose, is the product of the reaction between cellulose and nitrate. Nitrocellulose made from cotton fibers is called nitrocellulose. Nitrocellulose is a white fibrous polymer that is resistant to water, dilute acids, weak alkalis, and various oils. Different degrees of polymerization result in different strengths, but they are all thermoplastic substances. Easy to change color under sunlight and highly flammable. Attention should be paid to safety in production, processing, packaging, storage, transportation, sales, and use.

Agricultural urea N46 46% Properties of urea Urea, also known as carbamide, carbamide and urea. Pure urea is white, tasteless, odorless, needle shaped or prismatic crystal, with a melting point of 132.7 â?? under normal pressure. It is hygroscopic, deliquescent, hydrolyzable, and weakly alkaline. It is made into compound fertilizer with acid fertilizer. Urea is an organic compound composed of carbon, nitrogen, oxygen and hydrogen. It is a white crystal. Urea is one of the simplest organic compounds. The most important use of urea is as fertilizer. Its nitrogen content is more than 46%. After being converted into ammonium carbonate in soil, urea is hydrolyzed and absorbed by plants. It is the nitrogen fertilizer with the highest nitrogen content at present. Molecular formula of urea: CO (NH2) 2, molecular weight 60.06, density 1.335g/cm �³ï¼? The melting point is 132.7 â??. Soluble in water and alcohol, insoluble in ether and chloroform. It is slightly alkaline. It can react with acid to form salt. It has hydrolysis. Condensation reaction can be carried out at high temperature to produce biuret, triuret and cyanuric acid. Heat to 160 â?? and decompose to generate ammonia gas and turn into cyanic acid at the same time. Urea can be hydrolyzed into ammonia and carbon dioxide under the action of acid, alkali and enzyme (acid and alkali need to be heated). Unstable to heat, heat to 150 â??ï½? 160 â?? to deamination to biuret. Urea is easily soluble in water, 105g can be dissolved in 100ml water at 20 â??, and the aqueous solution shows neutral reaction. There are two kinds of urea products: crystalline urea is white acicular or prismatic crystal with strong hygroscopicity; Granular urea is a translucent particle with a particle size of 1~2mm, which has a smooth appearance and improved moisture absorption. Urea is a physiologically neutral fertilizer, which does not leave any harmful substances in the soil and has no adverse effects after long-term application. However, a small amount of biuret, also known as biuret, will be produced when the temperature is too high during granulation, which has an inhibitory effect on crops. Urea is molecular before conversion and cannot be adsorbed by soil, so it should be prevented from being lost with water; The ammonia formed after conversion is also volatile, so urea should also be deeply covered with soil. Urea is the first synthetic organic substance and widely exists in nature, such as 0.4% urea in fresh human feces. The new version of national standard GB/T2440-2017 for urea has been officially implemented since July 1, 2018. Compared with the replaced 2001 standard, certain adjustments have been made. New standard GB/T2440-2017

CASå?·:57-13-6 Urea for vehicles, agricultural urea, urea N46ï¼? When the temperature of urea is below 20 â?? and the relative humidity is below 70%, it will not only not absorb moisture, but also evaporate water and reduce its water content; When the temperature exceeds 20 â?? and the relative humidity is higher than 80%, it starts to absorb moisture, and becomes paste when it is serious. When the air is dried again, it will re agglomerate, which is only inferior to ammonium nitrate. When the urea aqueous solution is at 80 â??, hydrolysis and decomposition reactions will occur, forming ammonium carbamate, ammonia gas and carbon dioxide respectively. Under acid and alkaline conditions, urea will decompose faster when it is heated. Urea is easy to combine with straight chain carbohydrates to form crystalline additional compounds; It forms a variety of double salts with various inorganic compounds, such as Ca (NO3) 2 �· 4CO (NH2) 2, NH4Cl �· CO (NH2) 2, CaChemicalbookSO4 �· 4CO (NH2) 2, MgSO4 �· 4CO (NH2) 2 �· 3H2O, Mg (NO3) �· 4CO (NH2) 2 �· 2H2O, etc; It is easy to form urea phosphate, dicalcium phosphate and water with monocalcium phosphate, namely Ca (H2PO4) 2 �· H2O+CO (NH2) 2 â?? H3PO4 �· CO (NH2) 2+CaHPO4+H2O; With nitric acid, it is easy to form urea nitrate, CO (NH2) 2+HNO3 â?? CO (NH2) 2 �· HNO3, which combines and relaxes the two; It can combine with formaldehyde to form urea formaldehyde compounds (uric acid rubber shrinks), in which the higher proportion of formaldehyde is urea resin, and the lower proportion is slow-release (effective) urea.

Product name Tetramethylurea CAS NO.: 632-22-4 MF: C5H12N2O Structural type: Properties: Colorless transparent liquid. Slightly pleasant smell. It can be miscible with water, petroleum ether and most commonly used organic solvents. Product specification:ï¼?Q/CFH 14-2019ï¼? Items Specification Appearance Colorless Transparent Liquid Mass fraction of tetramethylurea, % â?¥ 99.5 water content,% â?¤ 0.5 Use: It is mainly used as an intermediate of insecticide; Advanced solvent, used in dye and other industries; As an intermediate of surfactant. Packaging, storage and transportation: Galvanized iron drum packaging, 180kg / barrel.

Use: It is used as an intermediate in the production of pesticides, ceftiofur and organic chemicals. It is mainly used in the synthesis of sulfadiazine drugs and the production of pesticides, fungicides and herbicides. It is also used in the production of new pesticides, such as dicofone, dicofone, kecaojin, etc .

For pharmaceutical intermediates 2-Cyanophenol Product name 2-Cyanophenol CAS NO.: 611-20-1 MF: C7H5NO Structural type: Properties: Grayish white to light brown powder.Items Specification Appearance White or off white powder Salicylnitrile content, % 98.0 Salicylamide content,% 0.5 water content,% 0.5